Hui Li 
- (2024): Optimal development of the new type of ultra-fine fly ash semi flexible pavement grouting material: Rheological, mechanical, pore distribution, and hydration characteristics. In: Construction and Building Materials, v. 438 (August 2024).
- (2023): Path optimizing of UAV inspection for 500kV AC transmission line cup-tower based on ant colony algorithm. In: Journal of Physics: Conference Series, v. 2598, n. 1 (1 September 2023).
- (2024): Preparing gypsum-based self-levelling energy storage mortar via fly ash cenospheres/paraffin used for floor radiant heating. In: Construction and Building Materials, v. 423 (April 2024).
- (2024): Performance Evaluation of a Multifunctional Road Marking Coating for Tunnels Based on Nano SiO2 and TiO2 Modifications. In: Buildings, v. 14, n. 2 (1 Februar 2024).
- (2024): Post-flood disaster damaged houses classification based on dual-view image fusion and Concentration-Based Attention Module. In: Sustainable Cities and Society, v. 103 (April 2024).
- (2024): Phase evolution and mechanical performance of red mud-gypsum waste derived activator composite cementitious materials exposed to various Ca/Si and Al/S ratios. In: Construction and Building Materials, v. 412 (Januar 2024).
- (2023): Predicting fatigue damage growth in cement-treated base layer built with construction and demolition waste. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Probabilistic outlier detection for robust regression modeling of structural response for high-speed railway track monitoring. In: Structural Health Monitoring, v. 23, n. 2 (Juli 2023).
- (2023): Permeability prediction of pervious concrete based on mix proportions and pore characteristics. In: Construction and Building Materials, v. 395 (September 2023).
- (2021): Performance of Polymer Cementitious Coatings for High-Voltage Electrical Infrastructure. In: Infrastructures, v. 6, n. 9 (September 2021).
- (2023): Pressure mapping and susceptibility to bonding failure for low-quality lamstock in cross laminated timber. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2022): Permeability evolution characteristics and microanalysis of reactive powder concrete of drilling shaft lining under stress-seepage coupling. In: Construction and Building Materials, v. 331 (Mai 2022).
- (2022): Optimal design of vibro-impact resistant fiber reinforced composite plates with polyurea coating. In: Composite Structures, v. 292 (Juli 2022).
- (2023): Predictive model for fatigue life in parallel-wire stay cables considering corrosion variability. In: Structure and Infrastructure Engineering, v. 19, n. 7 (September 2023).
- (2021): Pore Pressure and Strength Behaviors of Reconstituted Marine Sediments Involving Thermal Effects. In: International Journal of Geomechanics, v. 21, n. 4 (April 2021).
- (2021): Optimized negative stiffness damper with flexible support for stay cables. In: Structural Control and Health Monitoring, v. 28, n. 6 (April 2021).
- (2019): Performance analysis of a ductless personalized ventilation combined with radiant floor cooling system and displacement ventilation. In: Building Simulation, v. 12, n. 5 (August 2019).
- (2021): Performance evaluation of porous asphalt mixture enhanced with high dosages of cured carbon fiber composite materials. In: Construction and Building Materials, v. 274 (März 2021).
- (2010): Preparation and characteristics of n-nonadecane/cement composites as thermal energy storage materials in buildings. In: Energy and Buildings, v. 42, n. 10 (Oktober 2010).
- (2020): A passive negative stiffness damper in series with a flexible support: Theoretical and experimental study. In: Structural Control and Health Monitoring, v. 27, n. 9 (Juni 2020).
- (2018): Performance enhancement of porous asphalt pavement using red mud as alternative filler. In: Construction and Building Materials, v. 160 (Januar 2018).
- (2020): Optimal policy for structure maintenance: A deep reinforcement learning framework. In: Structural Safety, v. 83 (März 2020).
- (2013): Performance Variations of A Cable-stayed Bridge With Damaged Cables. In: International Journal of Structural Stability and Dynamics, v. 13, n. 5 (Mai 2013).
- (2012): Performances of Concrete-filled Gfrp Or Gfrp-steel Circular Tubes Subjected To Freeze-thaw Cycles. In: International Journal of Structural Stability and Dynamics, v. 12, n. 1 (Januar 2012).
- (2019): Optimum Filler–Bitumen Ratio of Asphalt Mortar Considering Self-Healing Property. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 8 (August 2019).
- (2019): Preparation and mechanical performance of annularly aligned steel fiber reinforced cement-based composite pipes. In: Construction and Building Materials, v. 211 (Juni 2019).
- (2011): Point-to-Surface Pounding of Highway Bridges with Deck Rotation Subjected to Bi-Directional Earthquake Excitations. In: Journal of Earthquake Engineering, v. 15, n. 2 ( 2011).
- (2015): Permeability Loss of Open-Graded Friction Course Mixtures due to Deformation-Related and Particle-Related Clogging: Understanding from a Laboratory Investigation. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 11 (November 2015).
- (2011): Pore structure and chloride permeability of concrete containing nano-particles for pavement. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2015): phenomenological contact-element model considering slight non-uniform contact for pounding analysis of highway bridges under seismic excitations. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 11 (September 2015).
Structurae kooperiert mit
