Kwang Ho Lee
- : Optimizing active chilled beam systems in the South Korean Climate: Comparative analysis of cooling energy and thermal comfort by set-point temperature. In: Energy and Buildings.
- (2024): In-situ measurement of thermal transmittance of building walls: Evaluation of stored heat flux in heavy-weight walls during the cooling season. In: Energy and Buildings, v. 325 (Dezember 2024).
- (2024): Particle Swarm Optimization for multi-chiller system: Capacity configuration and load distribution. In: Journal of Building Engineering, v. 98 (Dezember 2024).
- (2024): Energy characteristics of multi-chiller load distribution algorithms in a large office building. In: Energy and Buildings, v. 318 (September 2024).
- (2024): A new integrated framework to fault detection and diagnosis of air handling unit: Emphasizing the impact of symptoms. In: Energy and Buildings, v. 319 (September 2024).
- (2024): In-situ virtual heat flow meter model for monitoring heat flux of existing building envelope. In: Building and Environment, v. 253 (April 2024).
- (2024): Development and performance evaluation of intelligent algorithm for optimal control of a hybrid heat pump system during the cooling season. In: Energy and Buildings, v. 306 (März 2024).
- (2024): Benefits assessment of cool skin and ventilated cavity skin: Saving energy and mitigating heat and grid stress. In: Building and Environment, v. 247 (Januar 2024).
- (2024): Comparative energy analysis of cooling energy performance between conventional and hybrid air source internet data center cooling system. In: Energy and Buildings, v. 302 (Januar 2024).
- (2023): Machine learning based simultaneous control of air handling unit discharge air and condenser water temperatures set-point for minimized cooling energy in an office building. In: Energy and Buildings, v. 297 (Oktober 2023).
- (2023): Comparative Analysis of ANN and LSTM Prediction Accuracy and Cooling Energy Savings through AHU-DAT Control in an Office Building. In: Buildings, v. 13, n. 6 (23 Mai 2023).
- (2023): Appropriate level of development of in-situ building information modeling for existing building energy modeling implementation. In: Journal of Building Engineering, v. 69 (Juni 2023).
- (2021): Performance characteristics of a cascade multi-functional heat pump in the winter season. In: Energy and Buildings, v. 253 (Dezember 2021).
- (2020): Air-Handling-Unit Discharge Air Temperature Reset Based on Outdoor Air Temperature and Cooling Energy Performance in an Office Building. In: Journal of Energy Engineering, v. 146, n. 3 (Juni 2020).
- (2013): Cooling load reduction effect and its mechanism in between-glass cavity and venetian blind operation during the summer season. In: Building Simulation, v. 6, n. 4 (September 2013).
- (2021): In-situ application of an ANN algorithm for optimized chilled and condenser water temperatures set-point during cooling operation. In: Energy and Buildings, v. 233 (Februar 2021).
- (2008): The cooling and heating potential of an earth tube system in buildings. In: Energy and Buildings, v. 40, n. 4 (Januar 2008).
- (2009): Enhancement of natural ventilation in buildings using a thermal chimney. In: Energy and Buildings, v. 41, n. 6 (Juni 2009).
- (2010): Influence of raised floor on zone design cooling load in commercial buildings. In: Energy and Buildings, v. 42, n. 8 (August 2010).
- (2011): Simplified calculation method for design cooling loads in underfloor air distribution (UFAD) systems. In: Energy and Buildings, v. 43, n. 2-3 (Februar 2011).
- (2012): Automated control strategies of inside slat-type blind considering visual comfort and building energy performance. In: Energy and Buildings, v. 55 (Dezember 2012).
- (2013): An experimental study on the annual surface temperature characteristics of amorphous silicon BIPV window. In: Energy and Buildings, v. 62 (Juli 2013).
- (2014): Detailed heat balance analysis of the thermal load variations depending on the blind location and glazing type. In: Energy and Buildings, v. 75 (Juni 2014).
- (2014): Possibility of coupling outdoor air cooling and radiant floor cooling under hot and humid climate conditions. In: Energy and Buildings, v. 81 (Oktober 2014).
- (2016): Detailed analysis on part load ratio characteristics and cooling energy saving of chiller staging in an office building. In: Energy and Buildings, v. 119 (Mai 2016).
- (2016): Cooling energy performance analysis depending on the economizer cycle control methods in an office building. In: Energy and Buildings, v. 120 (Mai 2016).
- (2018): Influences of different operational configurations on combined effects of room air stratification and thermal decay in UFAD system. In: Energy and Buildings, v. 176 (Oktober 2018).
- (2018): Operational behavior characteristics and energy saving potential of vertical closed loop ground source heat pump system combined with storage tank in an office building. In: Energy and Buildings, v. 179 (November 2018).
- (2017): Application of artificial neural networks for determining energy-efficient operating set-points of the VRF cooling system. In: Building and Environment, v. 125 (November 2017).
- (2013): Dynamic predictive clothing insulation models based on outdoor air and indoor operative temperatures. In: Building and Environment, v. 59 (Januar 2013).
Structurae kooperiert mit
