JiHoon Kim 
- (2024): Hybrid models of machine-learning and mechanistic models for indoor particulate matter concentration prediction. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2023): Characteristics on compressive strength and microstructure of high-strength cementitious composites with waste glass beads. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): Study of microstructural changes in blast-furnace cement hardened by repeated dry and wet curing at high temperatures. In: Construction and Building Materials, v. 403 (November 2023).
- (2023): Insight on the mechanical properties of hierarchical porous calcium-silicate-hydrate pastes according to the Ca/Si molar ratio using in-situ synchrotron X-ray scattering and nanoindentation test. In: Construction and Building Materials, v. 365 (Februar 2023).
- (2022): Evaluations of frost and scaling resistance of fly ash concrete in terms of changes in water absorption and pore structure under the accelerated carbonation conditions. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): A study on the change in frost resistance and pore structure of concrete containing blast furnace slag under the carbonation conditions. In: Construction and Building Materials, v. 331 (Mai 2022).
- (2021): Influence of drying on frost resistance of mortar using a nitrite corrosion inhibitor and paraffin waterproofing agent. In: Construction and Building Materials, v. 283 (Mai 2021).
- (2022): Numerical study of unsteady compressible flow induced by multiple pods operating in the Hyperloop system. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 226 (Juli 2022).
- (2021): Instant mechanical recovery of heat-damaged nanosilica-incorporated cement composites under various rehydrations procedures. In: Materials and Structures, v. 55, n. 1 (18 Dezember 2021).
- (2020): Chemical properties and mass transfer resistance of mortar surface modified with silicate-based surface impregnant. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Influences of rehydration conditions on the mechanical and atomic structural recovery characteristics of Portland cement paste exposed to elevated temperatures. In: Construction and Building Materials, v. 235 (Februar 2020).
- (2012): Yi Sun-sin Bridge: Technologies for Accelerated Construction of 270m-High Pylons. Vorgetragen bei: 18th IABSE Congress: Innovative Infrastructures – Towards Human Urbanism, Seoul, Korea, 19-21 September 2012.
- (2014): Improving Accuracy of Early Stage Cost Estimation by Revising Categorical Variables in a Case-Based Reasoning Model. In: Journal of Construction Engineering and Management, v. 140, n. 7 (Juli 2014).
Structurae kooperiert mit
