Lei Jiang 
- (2024): Cloud Model-Based Intelligent Construction Management Level Assessment of Prefabricated Building Projects. In: Buildings, v. 14, n. 10 (8 Oktober 2024).
- (2024): Design equations for maximum stress concentration factors for concrete-filled steel tubular K-joints. In: Journal of Traffic and Transportation Engineering (English Edition), v. 11, n. 5 (Oktober 2024).
- (2024): Effects of vaterite and leachate solid residue prepared from magnesium slag on the performance of cement mortar. In: Construction and Building Materials, v. 429 (Mai 2024).
- (2023): Correlation analysis of the gradation design parameters and mechanical performance of semi-flexible pavement. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): An approach to improve compressive strength of cement paste at low temperature by carbonation curing. In: Construction and Building Materials, v. 365 (Februar 2023).
- (2022): 3D mesostructure generation of fully-graded concrete based on hierarchical point cloud and aggregate coarsening. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2022): An experimental and numerical investigation of the ballistic penetration behavior and failure mechanism of 3D MWK composites. In: Composite Structures, v. 299 (November 2022).
- (2022): Diurnal heat exposure risk mapping and related governance zoning: A case study of Beijing, China. In: Sustainable Cities and Society, v. 81 (Juni 2022).
- (2022): Effect of tunnel slope on the critical velocity of densimetric plumes and fire plumes in ventilated tunnels. In: Tunnelling and Underground Space Technology, v. 123 (Mai 2022).
- (2022): Comparison of strengthening methods for tubular T joint corresponding to each static failure mode. In: Structures, v. 36 (Februar 2022).
- (2021): Construction and Application of Recognition Model for Black-Odorous Water Bodies Based on Artificial Neural Network. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression. In: Composite Structures, v. 268 (Juli 2021).
- (2021): Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites. In: Composite Structures, v. 268 (Juli 2021).
- (2001): Competitive Adsorption of Phenolic Compounds onto Activated Carbon Fibers in Fixed Bed. In: Journal of Environmental Engineering (ASCE), v. 127, n. 8 (August 2001).
- (2019): Enhanced Effects of Tourmaline on Moving Bed Biofilm Reactor–Based Partial Nitrification Process. In: Journal of Environmental Engineering (ASCE), v. 145, n. 4 (April 2019).
- (2020): Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites. In: Composite Structures, v. 246 (August 2020).
- (2019): Fabrication, properties and failure of 3D stitched carbon/epoxy composites with no stitching fibers damage. In: Composite Structures, v. 220 (Juli 2019).
- (2014): Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature. In: Composite Structures, v. 111 (Mai 2014).
- (2020): Flexural behavior of concrete-filled rectangular steel tubular composite truss beams in the negative moment region. In: Engineering Structures, v. 216 (August 2020).
- (2020): Fatigue Behavior of Integral Built-Up Box Y-Joints between Concrete-Filled Chords with Perfobond Ribs and Hollow Braces. In: Journal of Structural Engineering (ASCE), v. 146, n. 3 (März 2020).
- (2019): A flexible morphing wing by soft wing skin actuation utilizing dielectric elastomer: experiments and electro-aerodynamic model. In: Smart Materials and Structures, v. 29, n. 1 (November 2019).
- (2014): Damage Evolution of Concrete Exposed to Sulfate Attack Under Drying-Wetting Cycles. In: The Open Construction and Building Technology Journal, v. 8, n. 1 (Dezember 2014).
- (2019): Experimental and numerical analysis of the stress concentration factor for concrete-filled square hollow section Y-joints. In: Advances in Structural Engineering, v. 23, n. 5 (November 2019).
- (2020): Enhancing heat release of asphalt pavement by a gradient heat conduction channel. In: Construction and Building Materials, v. 230 (Januar 2020).
- (2019): Fatigue behaviour of non-integral Y-joint of concrete-filled rectangular hollow section continuous chord stiffened with perfobond ribs. In: Engineering Structures, v. 191 (Juli 2019).
- (2003): A FEM/VOF hybrid formulation for underfill encapsulation modeling. In: Computers & Structures, v. 81, n. 8-11 (Mai 2003).
- (1988): Combined Lagrangian multiplier and penalty function finite element technique for elastic impact analysis. In: Computers & Structures, v. 30, n. 6 (Januar 1988).
- (1998): Finite-Element Model for Nailed Wood Joints under Reversed Cyclic Load. In: Journal of Structural Engineering (ASCE), v. 124, n. 1 (Januar 1998).
- (2004): A computational investigation of the effects of localized corrosion on plates and stiffened panels. In: Marine Structures, v. 17, n. 5 (September 2004).
- (2004): Finite-Element Model for Wood-Based Floors with Lateral Reinforcements. In: Journal of Structural Engineering (ASCE), v. 130, n. 7 (Juli 2004).
Structurae kooperiert mit
