Mohd Rosli Hainin
- (2024): Modeling and design optimization of the performance of stone matrix asphalt mixtures containing low-density polyethylene and waste engine oil using the response surface methodology. In: Construction and Building Materials, v. 446 (Oktober 2024).
- (2024): Effect of waste engine oil and warm mix additive on the physical, rheological, and short-term aging attributes of Styrene–Butadiene Rubber-modified asphalt binders. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2022): Rejuvenation of aged asphalt binders by waste engine oil and SBS blend: Physical, chemical, and rheological properties of binders and mechanical evaluations of mixtures. In: Construction and Building Materials, v. 346 (September 2022).
- (2021): Palm oil fuel ash application in cold mix dense-graded bituminous mixture. In: Construction and Building Materials, v. 287 (Juni 2021).
- (2021): Characterisation of microstructural and sound absorption properties of porous asphalt subjected to progressive clogging. In: Construction and Building Materials, v. 283 (Mai 2021).
- (2022): Synergistic effect of SBS copolymers and aromatic oil on the characteristics of asphalt binders and mixtures containing reclaimed asphalt pavement. In: Construction and Building Materials, v. 327 (April 2022).
- (2021): A comparative assessment of the physical and microstructural properties of waste garnet generated from automated and manual blasting process. In: Case Studies in Construction Materials, v. 14 (Juni 2021).
- (2021): Physical, thermal and micro-surface characteristics of PG76 binder incorporated with liquid chemical WMA additive. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2016): Evaluation of Performance Characteristics of Stone Mastic Asphalt Incorporating Industrial Waste. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 12 (Dezember 2016).
- (2016): Chloride penetration of RHA concrete under marine environment. In: Proceedings of the Institution of Civil Engineers - Maritime Engineering, v. 169, n. 2 (Juni 2016).
- (2013): Modelling the rheological properties of bituminous binders using mathematical equations. In: Construction and Building Materials, v. 40 (März 2013).
- (2013): The effect of lift thickness on permeability and the time available for compaction of hot mix asphalt pavement under tropical climate condition. In: Construction and Building Materials, v. 48 (November 2013).
- (2014): Investigation into hot-mix asphalt moisture-induced damage under tropical climatic conditions. In: Construction and Building Materials, v. 50 (Januar 2014).
- (2014): Characterisation of micro-structural damage in asphalt mixtures using image analysis. In: Construction and Building Materials, v. 54 (März 2014).
- (2015): Microstructural characterisation of dry mixed rubberised asphalt mixtures. In: Construction and Building Materials, v. 82 (Mai 2015).
- (2016): Density profile of hot mix asphalt layer during compaction with various types of rollers and lift thickness. In: Construction and Building Materials, v. 121 (September 2016).
- (2016): Engineering properties of asphalt binders containing nanoclay and chemical warm-mix asphalt additives. In: Construction and Building Materials, v. 112 (Juni 2016).
- (2016): Laboratory evaluation on the characteristics and pollutant emissions of nanoclay and chemical warm mix asphalt modified binders. In: Construction and Building Materials, v. 113 (Juni 2016).
- (2016): Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Microstructural investigation on air void properties of porous asphalt using virtual cut section. In: Construction and Building Materials, v. 155 (November 2017).
- (2017): Use of waste cooking oil, tire rubber powder and palm oil fuel ash in partial replacement of bitumen. In: Construction and Building Materials, v. 150 (September 2017).
- (2017): Mechanical performance of asphaltic concrete incorporating untreated and treated waste cooking oil. In: Construction and Building Materials, v. 150 (September 2017).
- (2017): Effects of mixture design variables on rubber–bitumen interaction: properties of dry mixed rubberized asphalt mixture. In: Materials and Structures, v. 50, n. 1 (Februar 2017).
Structurae kooperiert mit
