Junfeng Gao 
- (2025): Numerical investigation on shear behaviour of reinforced concrete beam with 3D printed concrete permanent formwork. In: Journal of Building Engineering, v. 100 ( 2025).
- (2025): Preparation and rheological properties of crack sealants for asphalt pavements. In: Construction and Building Materials, v. 465 (Februar 2025).
- (2025): Impact of environmental conditions on the bonding performance of asphalt overlays in high-altitude areas. In: Construction and Building Materials, v. 464 (Februar 2025).
- (2024): Three-dimensional reconstruction of asphalt road surface texture based on binocular stereo vision. In: Construction and Building Materials, v. 455 (Dezember 2024).
- (2024): A bilevel fast-convergent optimizer via high-fidelity convex models: Application on optimal operation of all-parallel heterogeneous chiller-pump systems. In: Energy and Buildings, v. 314 (Juli 2024).
- (2024): Laboratory-accelerated simulation and calibration method for ultraviolet aging of asphalt binders based on radiation equivalent conversion. In: Construction and Building Materials, v. 435 (Juli 2024).
- (2023): Prediction and evaluation the moisture damage resistance of rejuvenated asphalt mixtures based on neural network. In: Construction and Building Materials, v. 378 (Mai 2023).
- (2023): Multi-scale microstructure quantitative characterization and anti-erosion performance of PHC pipe pile. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): An improved partial differential equation filter scheme for topology optimization of additively manufactured coated structure. In: Computers & Structures, v. 288 (November 2023).
- (2023): Using the Information Quantity Method to Assess the Regional Risk of Highway Slope to Improve the Level of Risk Management. In: Advances in Civil Engineering, v. 2023 (Februar 2023).
- (2023): Research on the selection of polyurethane adhesive and direct tensile properties of polyurethane rubber particle mixture. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2022): Performance Evaluation of Cement Stabilized Mixture with Recycled Aggregate from Construction and Demolition Waste. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 46, n. 4 (Mai 2022).
- (2020): Performance and optimization of bio-oil/Buton rock asphalt composite modified asphalt. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2020): Measurement and modeling of skid resistance of asphalt pavement: A review. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Influence of Coarse-Aggregate Angularity on Asphalt Mixture Macroperformance: Skid Resistance, High-Temperature, and Compaction Performance. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (Mai 2020).
- (2018): Shear property, high-temperature rheological performance and low-temperature flexibility of asphalt mastics modified with bio-oil. In: Construction and Building Materials, v. 174 (Juni 2018).
- (2018): Research on properties of bio-asphalt binders based on time and frequency sweep test. In: Construction and Building Materials, v. 160 (Januar 2018).
- (2020): High-temperature rheological behavior and fatigue performance of lignin modified asphalt binder. In: Construction and Building Materials, v. 230 (Januar 2020).
- (2019): Laboratory evaluation on comprehensive performance of polyurethane rubber particle mixture. In: Construction and Building Materials, v. 224 (November 2019).
- (2019): Tuned photomechanical switching of laterally constrained arches. In: Smart Materials and Structures, v. 28, n. 7 (Juli 2019).
- (2019): Traffic open time prediction of fog seal with sand using image processing technology. In: Construction and Building Materials, v. 209 (Juni 2019).
- (2019): Investigation of adhesion and interface bond strength for pavements underlying chip-seal: Effect of asphalt-aggregate combinations and freeze-thaw cycles on chip-seal. In: Construction and Building Materials, v. 203 (April 2019).
- (2017): High temperature performance of SBS modified bio-asphalt. In: Construction and Building Materials, v. 144 (Juli 2017).
- (2018): Evaluation of the effect of bio-oil on the high-temperature performance of rubber modified asphalt. In: Construction and Building Materials, v. 191 (Dezember 2018).
- (2018): Effects of coarse aggregate angularity on the microstructure of asphalt mixture. In: Construction and Building Materials, v. 183 (September 2018).
- (2017): Comprehensive Performance Evaluation and Cost Analysis of SBS-Modified Bioasphalt Binders and Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 12 (Dezember 2017).
Structurae kooperiert mit
