0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Michael D. Engelhardt ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Reichenbach, Matthew C. / White, Joshua B. / Park, Sunghyun / Helwig, Todd A. / Engelhardt, Michael D. / Connor, Robert J. / Grubb, Michael A. (2024): Parametric Investigation of Load-Induced Cross-Frame Fatigue Effects in Composite Steel I-Girder Bridges. In: Journal of Bridge Engineering (ASCE), v. 29, n. 11 (November 2024).

    https://doi.org/10.1061/jbenf2.beeng-6432

  2. Lee, Jinwoo / Engelhardt, Michael D. / Taleff, Eric M. (2012): Mechanical Properties of ASTM A992 Steel After Fire. In: Engineering Journal, v. 49, n. 1 (März 2012).

    https://doi.org/10.62913/engj.v49i1.1222

  3. Engelhardt, Michael D. / Meacham, Brian / Kodur, Venkatesh / Kirk, Adam / Park, Haejun / van Straalen, Ijsbrand / Maljaars, Johan / van Weeren, Kees / de Feijter, Rene / Both, Kees: Observations from the Fire and Collapse of the Faculty of Architecture Building, Delft University of Technology. Vorgetragen bei: Structures Congress 2013, Pittsburgh, Pennsylvania, May 2-4, 2013.

    https://doi.org/10.1061/9780784412848.101

  4. El Ghor, Ahmad H. / Hantouche, Elie G. / Morovat, Mohammed A. / Engelhardt, Michael D. (2021): Rate-Dependent Behavior of Transverse Welded Lap Joints at Elevated Temperatures. In: Journal of Structural Engineering (ASCE), v. 147, n. 2 (Februar 2021).

    https://doi.org/10.1061/(asce)st.1943-541x.0002898

  5. Reichenbach, Matthew C. / Liu, Yangqing / Helwig, Todd A. / Engelhardt, Michael D. (2020): Lateral-Torsional Buckling of Singly Symmetric I-Girders with Stepped Flanges. In: Journal of Structural Engineering (ASCE), v. 146, n. 10 (Oktober 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002780

  6. Aboutaha, Riyad S. / Engelhardt, Michael D. / Jirsa, James O. / Kreger, Michael E. (1996): Retrofit of Concrete Columns with Inadequate Lap Splices by the Use of Rectangular Steel Jackets. In: Earthquake Spectra, v. 12, n. 4 (November 1996).

    https://doi.org/10.1193/1.1585906

  7. Popov, Egor P. / Engelhardt, Michael D. (1988): Seismic eccentrically braced frames. In: Journal of Constructional Steel Research, v. 10 (Januar 1988).

    https://doi.org/10.1016/0143-974x(88)90034-x

  8. Kim, Kee Dong / Engelhardt, Michael D. (2002): Monotonic and cyclic loading models for panel zones in steel moment frames. In: Journal of Constructional Steel Research, v. 58, n. 5-8 (Januar 2002).

    https://doi.org/10.1016/s0143-974x(01)00079-7

  9. Cai, Wenyu / Morovat, Mohammed A. / Engelhardt, Michael D. (2017): True stress-strain curves for ASTM A992 steel for fracture simulation at elevated temperatures. In: Journal of Constructional Steel Research, v. 139 (Dezember 2017).

    https://doi.org/10.1016/j.jcsr.2017.09.024

  10. Lee, Jinwoo / Engelhardt, Michael D. (2014): Pre-yielding effects of ASTM A992 steel at elevated temperatures. In: International Journal of Steel Structures, v. 14, n. 4 ( 2014).

    https://doi.org/10.1007/s13296-014-1210-2

  11. Engelhardt, Michael D. / Sabol, Thomas A. (1998): Reinforcing of steel moment connections with cover plates: benefits and limitations. In: Engineering Structures, v. 20, n. 4-6 (April 1998).

    https://doi.org/10.1016/s0141-0296(97)00038-2

  12. Hong, Jong-Kook / Uang, Chia-Ming / Okazaki, Taichiro / Engelhardt, Michael D. (2015): Link-to-Column Connection with Supplemental Web Doublers in Eccentrically Braced Frames. In: Journal of Structural Engineering (ASCE), v. 141, n. 8 (August 2015).

    https://doi.org/10.1061/(asce)st.1943-541x.0001170

  13. Civjan, Scott A. / Engelhardt, Michael D. / Gross, John L. (2000): Retrofit of Pre-Northridge Moment-Resisting Connections. In: Journal of Structural Engineering (ASCE), v. 126, n. 4 (April 2000).

    https://doi.org/10.1061/(asce)0733-9445(2000)126:4(445)

  14. Kwon, Gunup / Engelhardt, Michael D. / Klingner, Richard E. (2012): Parametric Studies and Preliminary Design Recommendations on the Use of Postinstalled Shear Connectors for Strengthening Noncomposite Steel Bridges. In: Journal of Bridge Engineering (ASCE), v. 17, n. 2 (März 2012).

    https://doi.org/10.1061/(asce)be.1943-5592.0000261

  15. Civjan, Scott A. / Engelhardt, Michael D. / Gross, John L. (2001): Slab Effects in SMRF Retrofit Connection Tests. In: Journal of Structural Engineering (ASCE), v. 127, n. 3 (März 2001).

    https://doi.org/10.1061/(asce)0733-9445(2001)127:3(230)

  16. Beck, Hermann / Engelhardt, Michael D. (2002): Net Section Efficiency of Steel Coupons with Power Actuated Fasteners. In: Journal of Structural Engineering (ASCE), v. 128, n. 1 (Januar 2002).

    https://doi.org/10.1061/(asce)0733-9445(2002)128:1(12)

  17. Okazaki, Taichiro / Liu, Dawei / Nakashima, Masayoshi / Engelhardt, Michael D. (2006): Stability Requirements for Beams in Seismic Steel Moment Frames. In: Journal of Structural Engineering (ASCE), v. 132, n. 9 (September 2006).

    https://doi.org/10.1061/(asce)0733-9445(2006)132:9(1334)

  18. Kim, Kee-Dong / Engelhardt, Michael D. (2007): Nonprismatic Beam Element for Beams with RBS Connections in Steel Moment Frames. In: Journal of Structural Engineering (ASCE), v. 133, n. 2 (Februar 2007).

    https://doi.org/10.1061/(asce)0733-9445(2007)133:2(176)

  19. Hadjioannou, Michalis / Donahue, Sean / Williamson, Eric B. / Engelhardt, Michael D. (2018): Large-Scale Experimental Tests of Composite Steel Floor Systems Subjected to Column Loss Scenarios. In: Journal of Structural Engineering (ASCE), v. 144, n. 2 (Februar 2018).

    https://doi.org/10.1061/(asce)st.1943-541x.0001929

  20. Popov, Egor P. / Tsai, Keh-Chyuan / Engelhardt, Michael D. (1989): On seismic steel joints and connections. In: Engineering Structures, v. 11, n. 3 (Juli 1989).

    https://doi.org/10.1016/0141-0296(89)90003-5

  21. Engelhardt, Michael D. / Sabol, Thomas A. (1997): Seismic-resistant steel moment connections: developments since the 1994 Northridge earthquake. In: Progress in Structural Engineering and Materials, v. 1, n. 1 (September 1997).

    https://doi.org/10.1002/pse.2260010112

  22. Kwon, Gunup / Engelhardt, Michael D. / Klingner, Richard E. (2009): Strengthening Bridges by Developing Composite Action in Existing Non-Composite Bridge Girders. In: Structural Engineering International, v. 19, n. 4 (November 2009).

    https://doi.org/10.2749/101686609789847109

  23. Kwon, Gunup / Klingner, Richard / Engelhardt, Michael D. (2008): Strengthening Existing Non-Composite Steel Girder Bridges by the Use of Post-Installed Shear Connectors. Vorgetragen bei: 17th IABSE Congress: Creating and Renewing Urban Structures – Tall Buildings, Bridges and Infrastructure, Chicago, USA, 17-19 September 2008.

    https://doi.org/10.2749/222137908796292308

  24. Aboutaha, Riyad S. / Engelhardt, Michael D. / Jirsa, James O. / Kreger, Michael R. (1995): Seismic strengthening of the reinforced concrete columns with inadequate lap splices. Vorgetragen bei: IABSE Symposium: Extending the Lifespan of Structures, San Francisco, CA, USA, August 1995.

    https://doi.org/10.5169/seals-55205

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine