A. C. Collop
- (2003): An analytical and experimental assessment of flexible road ironwork support structures. In: Proceedings of the Institution of Civil Engineers - Municipal Engineer, v. 156, n. 4 (Dezember 2003).
- (1996): Stiffness Reductions of Flexible Pavements due to Cumulative Fatigue Damage. In: Journal of Transportation Engineering, v. 122, n. 2 (März 1996).
- (1995): Parametric Study of Factors Affecting Flexible-Pavement Performance. In: Journal of Transportation Engineering, v. 121, n. 6 (November 1995).
- (2007): Effects of Pressure and Aging in SATS Test. In: Journal of Transportation Engineering, v. 133, n. 11 (November 2007).
- (1995): Viscoelastic Approach to Rutting in Flexible Pavements. In: Journal of Transportation Engineering, v. 121, n. 1 (Januar 1995).
- (2004): Comparison of ballast index tests for railway trackbeds. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 157, n. 3 (Juli 2004).
- (2005): Quantifying the relative strengths of railway ballasts. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 158, n. 2 (April 2005).
- (2007): Spherical Indentation Behavior of Asphalt Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 19, n. 9 (September 2007).
- (2008): Indirect tensile versus two-point bending fatigue testing. In: Proceedings of the Institution of Civil Engineers - Transport, v. 161, n. 4 (November 2008).
- (2007): The introduction of flexibility into a road ironwork installation. In: Proceedings of the Institution of Civil Engineers - Transport, v. 160, n. 3 (August 2007).
- (2005): Laboratory simulation of train loading and tamping on ballast. In: Proceedings of the Institution of Civil Engineers - Transport, v. 158, n. 2 (Mai 2005).
- (2005): Effects of surface cracking on responses in flexible pavements. In: Proceedings of the Institution of Civil Engineers - Transport, v. 158, n. 2 (Mai 2005).
- (2004): Development of the saturation ageing tensile stiffness (SATS) test. In: Proceedings of the Institution of Civil Engineers - Transport, v. 157, n. 3 (August 2004).
- (2003): Assessment of bond condition using the Leutner shear test. In: Proceedings of the Institution of Civil Engineers - Transport, v. 156, n. 4 (November 2003).
- (2001): The use of weigh-in-motion data in pavement design. In: Proceedings of the Institution of Civil Engineers - Transport, v. 147, n. 4 (November 2001).
- (2014): Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking. In: Journal of Modern Transportation, v. 22, n. 2 (Mai 2014).
- (2008): The effect of asphalt mixture gradation and compaction energy on aggregate degradation. In: Construction and Building Materials, v. 22, n. 5 (Mai 2008).
- (2008): The influence of aggregate, filler and bitumen on asphalt mixture moisture damage. In: Construction and Building Materials, v. 22, n. 9 (September 2008).
- (2009): Shear bond strength between asphalt layers for laboratory prepared samples and field cores. In: Construction and Building Materials, v. 23, n. 6 (Juni 2009).
- (2011): Development of an automatic torque test to measure the shear bond strength between asphalt. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2012): Experimental validation of a fractional model for creep/recovery testing of asphalt mixtures. In: Construction and Building Materials, v. 36 (November 2012).
- (2003): Viscoelastic linearity limits for bituminous materials. In: Materials and Structures, v. 36, n. 10 (Dezember 2003).
- (1997): Structural vibration. In: Engineering Structures, v. 19, n. 4 (April 1997).
- (2002): Properties of Polymer Modified Bitumen after Rubber-Bitumen Interaction. In: Journal of Materials in Civil Engineering (ASCE), v. 14, n. 4 (August 2002).
Structurae kooperiert mit
