Chao Chen 
- (2024): Multizone representation of time-varying airflows in naturally ventilated dwellings: Occupant-generated CO2 approach. In: Energy and Buildings, v. 308 (April 2024).
- (2024): Mechanical properties and environmental characteristics of the synergistic preparation of cementitious materials using electrolytic manganese residue, steel slag, and blast furnace slag. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Freeze–Thaw Cycle Characteristics of Solidified Sludge with Composite Rapid Soil Stabilizer. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 11 (November 2023).
- (2023): A New Type of Inerter with Easily Adjustable Inertance and Superior Adaptability: Crank Train Inerter. In: Journal of Structural Engineering (ASCE), v. 149, n. 6 (Juni 2023).
- (2023): Flexural behaviors of sandwich panels with AR-glass textile-reinforced concrete under the low-velocity impact. In: Journal of Building Engineering, v. 69 (Juni 2023).
- (2023): Investigating the concentration distribution characteristics of methane in large storage facility using desorption-concentration gradient method and CFD simulation. In: Building and Environment, v. 228 (Januar 2023).
- (2023): Multiaxial mechanical characterization of additively manufactured open-cell Kelvin foams. In: Composite Structures, v. 305 (Februar 2023).
- (2020): Modelling wind turbine tower-rotor interaction through an aerodynamic damping matrix. In: Journal of Sound and Vibration, v. 489 (Dezember 2020).
- (2014): Numerical Studies on Smoke Spread in Urban Underground Tunnel with Horizontal Junctions. In: Procedia Engineering, v. 71 ( 2014).
- (2022): Intelligent robotic systems for structural health monitoring: Applications and future trends. In: Automation in Construction, v. 139 (Juli 2022).
- (2021): Overall grouting compactness detection of bridge prestressed bellows based on RF feature selection and the GA-SVM model. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Modeling method of an active–passive ventilation wall with latent heat storage for evaluating its thermal properties in the solar greenhouse. In: Energy and Buildings, v. 238 (Mai 2021).
- (2020): An improved non-intrusive load disaggregation algorithm and its application. In: Sustainable Cities and Society, v. 53 (Februar 2020).
- (2021): Investigation of natural ventilation performance of large space circular coal storage dome. In: Building Simulation, v. 14, n. 4 (Februar 2021).
- (2021): Local approaches and XFEM used to estimate life of CFRP repaired cracked welded joints under fatigue loading. In: Composite Structures, v. 260 (März 2021).
- (2008): A new kind of phase change material (PCM) for energy-storing wallboard. In: Energy and Buildings, v. 40, n. 5 (Januar 2008).
- (2014): Heat transfer performance and structural optimization design method of vertical phase change thermal energy storage device. In: Energy and Buildings, v. 68 (Januar 2014).
- (2016): Indicators evaluating thermal inertia performance of envelops with phase change material. In: Energy and Buildings, v. 122 (Juni 2016).
- (2020): Mountain flooding analysis based on SCS-CN model – A case study in Mingxi, China. In: IOP Conference Series: Materials Science and Engineering, v. 780 (April 2020).
- (2020): A new remote sensing image fusion method combining principal component analysis and curvelet transform. In: IOP Conference Series: Materials Science and Engineering, v. 780 (April 2020).
- (2018): Formaldehyde emission behavior of plywood with phenol-formaldehyde resin modified by bio-oil under radiant floor heating condition. In: Building and Environment, v. 144 (Oktober 2018).
- (2016): Impact of the external window crack structure on indoor PM2.5 mass concentration. In: Building and Environment, v. 108 (November 2016).
- (2015): Influence of atmospheric fine particulate matter (PM 2.5 ) pollution on indoor environment during winter in Beijing. In: Building and Environment, v. 87 (Mai 2015).
- (2017): New Global Sensitivity Measure Based on Fuzzy Distance. In: Journal of Engineering Mechanics (ASCE), v. 143, n. 11 (November 2017).
- (2017): Fractal characterization on pore structure and analysis of fluidity and bleeding of fresh cement paste based on 1H low-field NMR. In: Construction and Building Materials, v. 140 (Juni 2017).
- (2017): Identification of hydration stage of calcium sulfoaluminate cement at an early age with helium pycnometry. In: Materials and Structures, v. 50, n. 3 (Juni 2017).
- (2017): Modeling early age RC slab cracking considering time-dependent bond behaviour. In: Engineering Structures, v. 138 (Mai 2017).
- (2017): A knee-mounted biomechanical energy harvester with enhanced efficiency and safety. In: Smart Materials and Structures, v. 26, n. 6 (Juni 2017).
- (2015): Influence of traffic force on pollutant dispersion of CO, NO and particle matter (PM2.5) measured in an urban tunnel in Changsha, China. In: Tunnelling and Underground Space Technology, v. 49 (Juni 2015).
- (2018): Influence of Aluminum Sulfate on Hydration and Properties of Cement Pastes. In: Journal of Advanced Concrete Technology, v. 16, n. 10 (Oktober 2018).
Structurae kooperiert mit
