Repairing of RC Structures by Steel Fibred High Strength Concrete
|
Bibliografische Angaben
Autor(en): |
Iakov Iskhakov
(Ariel University, Department of Civil Engineering, Ariel, Israel)
Yuri Ribakov (Ariel University, Department of Civil Engineering, Ariel, Israel) |
||||
---|---|---|---|---|---|
Medium: | Tagungsbeitrag | ||||
Sprache(n): | Englisch | ||||
Tagung: | IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016 | ||||
Veröffentlicht in: | IABSE Congress Stockholm, 2016 | ||||
|
|||||
Seite(n): | 1637-1643 | ||||
Anzahl der Seiten (im PDF): | 7 | ||||
DOI: | 10.2749/stockholm.2016.1637 | ||||
Abstrakt: |
Steel fibered high strength concrete (SFHSC) is effective for repairing structures from normal strength concrete (NSC). Design of NSC structures that should be repaired is based on general concepts for design of two-layer beams, developed by the authors. Such beams are effective when their section carries large bending moments. Steel fibers increase the ultimate deformations of high strength concrete. The required ductility level of the repaired element is achieved by selecting appropriate fibers' content. This is important for design of structures to dynamic loadings. The paper is focused on interpreting the experimental data in order to find the optimal fibre content and correspondingly the highest Poisson coefficient and ductility of the repaired elements’ sections. The experimental results, obtained in the frame of this study, form a basis for provisions, related to repairing of NSC beams and slabs, using SFHSC. |
||||
Stichwörter: |
Duktilität
|