Numerical Simulation of Longitudinal Shear Behavior of High Strength Steel and Concrete Composite Girders
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Lan Duan
(Department of Bridge Engineering, College of Highways, Chang''an University, Xi’an, CHINA)
Yangfan Xin (Department of Bridge Engineering, College of Highways, Chang''an University, Xi’an, CHINA) Zhaxi Dawa (Tibet Tian-lu Co., Ltd. , Tibet, CHINA) Chunsheng Wang (Tibet Tian-lu Co., Ltd. , Tibet, CHINA) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022 | ||||
| Veröffentlicht in: | IABSE Congress Nanjing 2022 | ||||
|
|||||
| Seite(n): | 505-512 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| DOI: | 10.2749/nanjing.2022.0505 | ||||
| Abstrakt: |
Longitudinal shear failure is a typical failure mode for composite girders. Based on experimental study, the finite element model was calibrated and numerical studies were carried out to analysis the longitudinal shear behaviour of high strength steel and concrete composite girders. It was analysed the effect of transverse reinforcement ratio, concrete strength, and steel grade on the longitudinal shear behaviour of high strength steel and concrete composite girders. Based on the current specifications, the transverse reinforcement area and longitudinal shear strength of the test girder were verified. Learn from the analysis results, the concrete strength grade no less than C60 was suggested with priority for concrete slab, for composite girders using steel with nominal yielding strengthen above 420 MPa. To prevent the longitudinal shear failure for the high strength steel and concrete composite girders, the transverse reinforcement ratio no less than 1,18% was suggested. |
||||
| Stichwörter: |
numerische Simulation Bemessungskriterium
|
||||
| Copyright: | © 2022 International Association for Bridge and Structural Engineering (IABSE) | ||||
| Lizenz: | Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden. |
||||