0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

New developments in the design of Z-shaped steel sheet pile walls

 New developments in the design of Z-shaped steel sheet pile walls
Autor(en): ,
Beitrag für IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022, veröffentlicht in , S. 1772-1779
DOI: 10.2749/prague.2022.1772
Preis: € 25,00 inkl. MwSt. als PDF-Dokument  
ZUM EINKAUFSWAGEN HINZUFÜGEN
Vorschau herunterladen (PDF-Datei) 0.15 MB

Harbour constructions like quay walls or excavation supports in civil engineering are often built up with steel sheet pile walls. Aside of U-steel sheet piles also Z-shaped piles with interlocks ar...
Weiterlesen

Bibliografische Angaben

Autor(en): (Institute of Structural Design, University of Stuttgart, Germany)
(Institute of Structural Design, University of Stuttgart, Germany)
Medium: Tagungsbeitrag
Sprache(n): Englisch
Tagung: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022
Veröffentlicht in:
Seite(n): 1772-1779 Anzahl der Seiten (im PDF): 8
Seite(n): 1772-1779
Anzahl der Seiten (im PDF): 8
DOI: 10.2749/prague.2022.1772
Abstrakt:

Harbour constructions like quay walls or excavation supports in civil engineering are often built up with steel sheet pile walls. Aside of U-steel sheet piles also Z-shaped piles with interlocks are widely used in such constructions. The pressure on costs and efficiency and the competition in this field leads to the necessity of increased efficiency in the design of steel sheet pile. To benefit from the potentials in the bending moment capacity of semi-compact Z-shaped steel sheet piles, the University of Stuttgart carried out four-point bending tests. A FE-model was developed and validated by back calculating the experiments. Investigations on the bending moment capacity were executed with the validated model followed by an extensive parametric study. Among different Z-piles, the actual geometries and the steel grades were varied leading to a different compression flange slenderness. In addition, different lock states were taken into account to investigate the impact on the bending moment capacity. In the end, three resistance models were evaluated for further development of Eurocode 3 Part 5.

Stichwörter:
Kaimauern
Copyright: © 2022 International Association for Bridge and Structural Engineering (IABSE)
Lizenz:

Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden.