Model-based TMD Design for the Footbridge "Inwilerstrasse" in Switzerland and ist Experimental Verification
(Maurer Switzerland GmbH, 8118 Pfaffhausen, Switzerland)
Florian Obholzer (Maurer SE, 80807 Munich, Germany)
Peter Huber (Maurer SE, 80807 Munich, Germany)
|Tagung:||Footbridge 2022: Creating Experience, Madrid, Spain, 07-09 September 2022|
|Veröffentlicht in:||Footbridge Madrid 2022 - Creating Experience|
The TMD system of the footbridge "Inwilerstrasse" near Zug in Switzerland was model-based designed for the first vertical bending mode, the expected human excitation, assuming the inherent damping of 0.3 % and ensuring the acceleration limit CL1 (0.50 m/s2) of HIVOSS. After the installation of the locked TMDs, first, the TMD frequency was optimized based on the identified bridge eigenfrequency by adjusting the TMD mass.
Then, the bridge with locked and activated TMDs was excited by five synchronized persons. These tests were re-computed adopting the experimentally identified eigenfrequency and damping ratio of the first bending mode and the optimized TMD mass. The re-computation demonstrates that the excitation force amplitude of one bouncing person must be set to approximately 600 N in order to obtain the measured acceleration of 0.117 m/s2 of the bridge with activated TMDs. The value of 600 N seems reasonable as this corresponds to approximately 80 % of the average body weight (76 kg) of one person. The very low acceleration of 0.117 m/s2 of the bridge with activated TMD demonstrates the effectiveness of TMDs.
Dieses Werk ist urheberrechtlich geschützt. Der/die Urheber erteilt durch die Veröffentlichung nur das Recht, dieses Werk zu betrachten/lesen und herunterzuladen. Eine weitere Vervielfältigung und Veröffentlichung bedarf der Genehmigung des Urhebers/der Urheber.