Maintenance and repair of slab anchors on a curved non composite steel box-girder bridge
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Koji Konno
(Shutoko Engineering Company Limited Tokyo, Japan)
Yoshifumi Nagata (Metropolitan Expressway Company Limited Tokyo, Japan) Yumiko Itabashi (Horus Company Limited Tokyo, Japan) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016 | ||||
| Veröffentlicht in: | IABSE Congress Stockholm, 2016 | ||||
|
|||||
| Seite(n): | 884-891 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| Jahr: | 2016 | ||||
| DOI: | 10.2749/stockholm.2016.0871 | ||||
| Abstrakt: |
Fractures of slab anchors were detected on a curved non-composite steel box-girder bridge on the Metropolitan Expressway. Fractographic investigation concluded that the fractures were caused by metallic fatigue. Because of fractures of slab anchors, a gap originated due to bond deterioration around the boundaries of the RC slab and the steel girder, and also closure behavior of the gaps due to traffic of over-sized vehicles was confirmed. Maintenance and repair was implemented to integrate once again the RC slab and the steel girder. As means of construction, post-installed anchor was used since traffic regulation is unnecessary and construction is possible from beneath the road surface. Therefore, a FEM analysis and a local load carrying test was carried out intended for curved box girders of a maximum transverse slope of 9%. Reviews considering deformation behavior and acting force of the damage were conducted and was reflected in the repair design. |
||||
| Stichwörter: |
Ermüdung FEM gekrümmte Brücke
|
||||
