High toughness RC railway viaduct with columns reinforced by arranging a spiral rebar inside of the longitudinal bars
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Kiyotaka Sugita
(Civil Engineer, East Japan Railway Company, Tokyo, Japan)
Shogo Osawa (Civil Engineer, East Japan Railway Company, Tokyo, Japan) Kosuke Kuwakino (Civil Engineer, East Japan Railway Company, Tokyo, Japan) Daisuke Tsukishima (Civil Engineer, East Japan Railway Company, Tokyo, Japan) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017 | ||||
| Veröffentlicht in: | IABSE Symposium Vancouver 2017 | ||||
|
|||||
| Seite(n): | 2864-2871 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| Jahr: | 2017 | ||||
| DOI: | 10.2749/vancouver.2017.2864 | ||||
| Abstrakt: |
Since Japan is the land of earthquakes, the seismic design is very important for the design of civil engineering structures and the design of architectural structures in Japan. The seismic design standard has been revised by the damage of earthquakes in the past. After the 2011 off the Pacific coast of Tohoku Earthquake, there is the need for Anti-Catastrophe Performance and redundancy to have the measures for Unanticipated Earthquake in the seismic design of Japan. Therefore, the authors developed the new method of the reinforcing bar arrangement. The new method can enhance dramatically ductility capacity in the RC column, so it is possible to give sufficient redundancy against Unanticipated Earthquake. The authors think that it is a very effective technique in the seismic design. In this report, we report the performance evaluation method of the RC column by the new method and the construction results. |
||||
| Stichwörter: |
Erdbebenbemessung Duktilität Redundanz
|
||||