FLOATGEN – Design and Construction of the First Floating Wind Turbine in France
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Nicolas Jestin
(Bouygues Travaux Publics, Guyancourt, France)
Perceval Modiano (Bouygues Travaux Publics, Guyancourt, France) Régis Bigard (Bouygues Travaux Publics, Guyancourt, France) Christian Crémona (Bouygues Travaux Publics, Guyancourt, France) Bertrand Dumas (IDEOL, La Ciotat, France) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018 | ||||
| Veröffentlicht in: | IABSE Symposium Nantes 2018 | ||||
|
|||||
| Seite(n): | S15-59 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| DOI: | 10.2749/nantes.2018.s15-59 | ||||
| Abstrakt: |
FLOATGEN is France’s first 2 MW offshore floating turbine which will be located off Le Croisic, in Brittany. The turbine will be operated for a period of two years and the generated electricity will be fed into the national power grid. The floating foundation used for FLOATGEN is a patented square ring-shaped foundation system, open in its centre and known as the Damping Pool®; it will provide optimal stability at low cost. This floating foundation is held on-site by means of a mooring system consisting of double mooring lines at the front and double mooring lines on each side at the rear. The floating pontoon is a C55/67 self-compacting light concrete that is reinforced and prestressed. The structure has been built in the Saint-Nazaire harbour on three connected floating barges. The paper describes the main research, design and erection issues, as well as the launching process and the installation of the wind tower. |
||||
| Stichwörter: |
Betonbauwerk (Massivbauwerk)
|
||||