Fatigue strength of large diameters tension rods with metric cut thread
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Georgios Skarmoutsos
(Institute of Structural Design - University of Stuttgart, Stuttgart, Germany)
Mathias Euler (Institute of Construction Engineering – Brandenburg, University of Technology, Cottbus, Germany) Ulrike Kuhlmann (Institute of Structural Design - University of Stuttgart, Stuttgart, Germany) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021 | ||||
| Veröffentlicht in: | IABSE Congress Ghent 2021 | ||||
|
|||||
| Seite(n): | 1479-1487 | ||||
| Anzahl der Seiten (im PDF): | 9 | ||||
| DOI: | 10.2749/ghent.2021.1479 | ||||
| Abstrakt: |
The present paper deals with the fatigue strength of large diameters tension rods with metric, cut thread of S460N steel grade. In total 36 fatigue tests equally categorised to 4 experimental series with two varying parameters (i) size diameter, M68 and M100, and (ii) surface treatment, hot-dip galvanized or as-rolled, were performed by the Institute of Structural Design at the Material Testing Institute of the University of Stuttgart. The tests conducted herein for rods of metric, cut threads validated the detail category 50 as well as its factor for size effect, while being slightly on the safe side. Additionally, one specimen of M100 as-rolled tension rods, equipped with six miniature strain gauges placed on the thread root of the upper tension rod was tested up to 4,8 MN of quasi-static monotonic tension load- ing until complete failure. Strain concentration factors for the thread root of the M100 tension rod were calculated. |
||||
| Stichwörter: |
Ermüdung Grösseneffekt
|
||||
| Copyright: | © 2021 International Association for Bridge and Structural Engineering (IABSE) | ||||
| Lizenz: | Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden. |
||||