Experimental Study on Tension Mechanisms of UHPC Link Slab
|
Bibliografische Angaben
Autor(en): |
Bruno Briseghella
(Fuzhou University, Fuzhou, Fujian, China)
Jianhui Lin (Fuzhou University, Fuzhou, Fujian, China) Junqing Xue (Fuzhou University, Fuzhou, Fujian, China) Xiangfeng Pan (Fuzhou University, Fuzhou, Fujian, China) Camillo Nuti (Department of Architecture, Roma Tre University, Roma, Italy) |
||||
---|---|---|---|---|---|
Medium: | Tagungsbeitrag | ||||
Sprache(n): | Englisch | ||||
Tagung: | IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022 | ||||
Veröffentlicht in: | IABSE Congress Nanjing 2022 | ||||
|
|||||
Seite(n): | 600-606 | ||||
Anzahl der Seiten (im PDF): | 7 | ||||
DOI: | 10.2749/nanjing.2022.0600 | ||||
Abstrakt: |
The ultra-high performance concrete (UHPC) link slab has been proposed to provide a suitable solution to the cracking problem of conventional reinforced concrete (RC) link slab. This paper presents an experimental study on the tension mechanisms of UHPC link slab under monotonic tension loads. The experimental results of load-displacement curves, crack development and strains of UHPC link slab were investigated and compared with those of RC link slab. It can be found that in the elastic phase, the tension stiffness and ultimate loads of the UHPC link slab were respectively 2.6 and 2.4 times those of the RC link slab. Compared with the RC link slab, the number of cracks on the top surface of the UHPC link slab was larger, but the average crack width was significantly smaller. The concrete and reinforcement strains of UHPC link slab were smaller than those of RC link slab. |
||||
Stichwörter: |
ultrahochfester Beton
|
||||
Copyright: | © 2022 International Association for Bridge and Structural Engineering (IABSE) | ||||
Lizenz: | Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden. |