Experimental Study on Shear Behavior of Perfobond Connector with Boot Shaped Slots
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Zhanchong Shi
(Department of Bridge Engineering, Tongji University)
Qingtian Su (Department of Bridge Engineering, Tongji University) Xinyi He (Department of Bridge Engineering, Tongji University) Quanlu Wang (Inner Mongolia Jiaotong Design Institute) Kege Zhou (Inner Mongolia Jiaotong Design Institute) Jinshan Yu (Inner Mongolia Jiaotong Design Institute) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019 | ||||
| Veröffentlicht in: | The Evolving Metropolis | ||||
|
|||||
| Seite(n): | 2070-2077 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| DOI: | 10.2749/newyork.2019.2070 | ||||
| Abstrakt: |
In order to solve the construction problem of perforating rebars’ precise location and it’s getting through the circular holes for the the conventional perfobond connector, a new type of perfobond connector with boot shaped slots was proposed. This new type perfobond connector has the advantage of convenient construction and pricise location. Three groups of push-out tests with nine specimens were carried out to study the shear capacity of the new type perfobond connector. The effect of the number and the spacing of boot shaped slots on failure modes, shear capacity, peak slip and shear stiffness were mainly studied. The test results show that the new type of perfobond connector with boot shaped slots has a high shear capacity and a good ductility, it could be widely applied on the connection between the steel and the concrete structures. |
||||
| Stichwörter: |
Schubtragfähigkeit Schubsteifigkeit
|
||||