0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Experimental Research on Concentrated Load Transfer between Steel and Slender Reinforced Concrete Slabs by High Performance Saw- Tooth Connectors

 Experimental Research on Concentrated Load Transfer between Steel and Slender Reinforced Concrete Slabs by High Performance Saw- Tooth Connectors
Autor(en): , ,
Beitrag für IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017, veröffentlicht in , S. 1098-1105
DOI: 10.2749/vancouver.2017.1098
Preis: € 25,00 inkl. MwSt. als PDF-Dokument  
ZUM EINKAUFSWAGEN HINZUFÜGEN
Vorschau herunterladen (PDF-Datei) 0.23 MB

This paper presents the results of an experimental study on saw-tooth connectors. One main application of these connectors is in hybrid structures, where they connect steel struts or cables to slen...
Weiterlesen

Bibliografische Angaben

Autor(en): (Technische Universität Berlin, Berlin, Germany)
(Technische Universität Berlin, Berlin, Germany)
(Technische Universität Berlin, Berlin, Germany University of Jordan, Amman, Jordan)
Medium: Tagungsbeitrag
Sprache(n): Englisch
Tagung: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017
Veröffentlicht in:
Seite(n): 1098-1105 Anzahl der Seiten (im PDF): 8
Seite(n): 1098-1105
Anzahl der Seiten (im PDF): 8
Jahr: 2017
DOI: 10.2749/vancouver.2017.1098
Abstrakt:

This paper presents the results of an experimental study on saw-tooth connectors. One main application of these connectors is in hybrid structures, where they connect steel struts or cables to slender concrete decks. In these connections huge and concentrated forces are transferred from steel into concrete. According to the structural system, these connections may occur in the middle or on the edge of the reinforced concrete deck. Depending on the location within the main structure the rc-deck itself is exposed to compression or tension. Therefore, four different build-in situations are being investigated on slender rc-slabs. The presented experiments assess the distribution of the shear force along the connector. A preliminary FE-analysis based on the elasticity theory is compared with the observed load-bearing behavior. The tests show that the loading of the rc-slab in compression or tension has a high impact on the load capacity. All the tests show brittle failure in the concrete. This issue is addressed and investigated during this study.

Stichwörter:
Stahl Beton Brücken Ermüdung Fuge Verbundkonstruktionen Lager Gebäude