0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

An Equivalent Homogeneous Model for FRP Sandwich Bridge Deck Panels with Sinusoidal Cores

An Equivalent Homogeneous Model for FRP Sandwich Bridge Deck Panels with Sinusoidal Cores
Autor(en):

Medium: Tagungsbeitrag
Sprache(n): Englisch
Tagung: Footbridge 2017 Berlin - Tell A Story, 6-8.9.2017, Technische Universität Berlin (TU Berlin)
Veröffentlicht in:
Jahr: 2017
DOI: 10.24904/footbridge2017.09438
Abstrakt:

Fibre reinforced plastic (FRP) sandwich panels with sinusoidal cores are an attractive solution both in new construction and rehabilitation of existing bridge decks. FRP sandwich panels, comprising of two face plates separated by a core of stiffeners offer better performance due to high stiffness-to-mass ratio along with numerous impressive properties like corrosion resistance, high impact strength etc. Analysis of sandwich panels using exact three dimensional (3D) modelling is very much complicated and also time consuming. To overcome this problem, the whole deck panel can be assumed as an equivalent orthotropic continuum for simplified analysis. This paper is focused on a numerical study to find equivalent elastic constants to replace FRP sandwich panel with a homogeneous orthotropic plate as shown in Fig. 1. The present numerical model is applicable for the sandwich panels with any type of core geometry which is periodic in nature. The equivalent material properties generated from the present analysis are validated by comparing with some reported theoretical and numerical results. To determine flexibility of the present model, equivalent orthotropic properties have been generated for FRP sandwich panels with three types of core configurations: rib, circular and triangular. Static and dynamic analyses have also been performed using the proposed equivalent model and the results are compared with the results obtained from 3D finite element (FE) model.

Stichwörter:
Finite-Elemente-Analyse Eigenfrequenz Sandwich Brückentafel Steifigkeit
Lizenz:

Dieses Werk ist urheberrechtlich geschützt. Der/die Urheber erteilt durch die Veröffentlichung nur das Recht, dieses Werk zu betrachten/lesen und herunterzuladen. Eine weitere Vervielfältigung und Veröffentlichung bedarf der Genehmigung des Urhebers/der Urheber.

Bauwerke und Projekte

Bauwerkstypen

Vorschau herunterladen (PDF-Datei)
0.89 MB
  • Über diese
    Datenseite
  • Reference-ID
    10075292
  • Veröffentlicht am:
    01.09.2017
  • Geändert am:
    05.06.2024
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine