Design Method and Finite Element Analysis of Precast Longitudinal Split-Piece Cover Beam
|
Bibliografische Angaben
Autor(en): |
Qianyi Mao
(Tongji University, Yangpu District, Shanghai, China)
Dong Xu (Tongji University, Yangpu District, Shanghai, China) Yongxue Jin (Tongji University, Yangpu District, Shanghai, China) |
||||
---|---|---|---|---|---|
Medium: | Tagungsbeitrag | ||||
Sprache(n): | Englisch | ||||
Tagung: | IABSE Congress: Bridges and Structures: Connection, Integration and Harmonisation, Nanjing, People's Republic of China, 21-23 September 2022 | ||||
Veröffentlicht in: | IABSE Congress Nanjing 2022 | ||||
|
|||||
Seite(n): | 1088-1096 | ||||
Anzahl der Seiten (im PDF): | 9 | ||||
DOI: | 10.2749/nanjing.2022.1088 | ||||
Abstrakt: |
In order to reduce the weight of prefabricated cover girders and solve the construction problem that it is difficult to realize one-time prefabricated assembly of large cantilever concrete cover girders, urban viaducts usually use large cantilever prestressed concrete cover girders. Taking a 2×30m simply-supported girder bridge as the superstructure, the paper proposes a precast longitudinal split type cover girder, and uses the large general finite element analysis software WISEPLUS to establish a finite element model to simulate and adjust the structural structure, prestressing distribution, and construction stage division of each cover girder (single 1,0m, 0,9m, 0,8m), and the cover girder under this design method in the construction stage and The design method is used to verify the feasibility and reasonableness of the design scheme, and to provide methods and references for similar designs. |
||||
Stichwörter: |
Finite-Elemente-Analyse
|
||||
Copyright: | © 2022 International Association for Bridge and Structural Engineering (IABSE) | ||||
Lizenz: | Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden. |