Control and optimization of UAV measurement parameters for alignment measurement in bridge construction
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Xuefei Shi
(Tongji University, Shanghai, China)
Qi Xu (Tongji University, Shanghai, China) Haiying Ma 
(Tongji University, Shanghai, China)
Jun Song (Tongji University Building Quality Inspection Institute, Shanghai, China) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021 | ||||
| Veröffentlicht in: | IABSE Congress Ghent 2021 | ||||
|
|||||
| Seite(n): | 638-643 | ||||
| Anzahl der Seiten (im PDF): | 6 | ||||
| DOI: | 10.2749/ghent.2021.0638 | ||||
| Abstrakt: |
Alignment measurement is necessary during the process of bridge construction. However, traditional measurement methods consume a lot of time and labor, especially for long-distance measurement. UAV photogrammetry has the advantages of high manoeuvrability, low cost, and independence on labour. The application of UAV to bridge alignment measurement can improve efficiency and promote construction control automation. In this paper, the framework and control parameters of UAV photogrammetry was studied. Experimental study was conducted to investigate the effect of parameters on the measurement accuracy including flying height, angle of bundle, camera position and photo quantity. On this basis, the optimal parameters for bridge alignment photogrammetry are summarized. With the optimized measurement scheme, the coordinate measurement accuracy of each point can reach millimetre level. |
||||
| Stichwörter: |
Brückenbau Photogrammetrie
|
||||
| Copyright: | © 2021 International Association for Bridge and Structural Engineering (IABSE) | ||||
| Lizenz: | Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden. |
||||