Bearing behaviour of biaxial hollow core slabs
![]() |
|
Bibliografische Angaben
Autor(en): |
Marcin Abramski
Andrej Albert Andreas Nitsch Jürgen Schnell |
||||
---|---|---|---|---|---|
Medium: | Tagungsbeitrag | ||||
Sprache(n): | Englisch | ||||
Tagung: | IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010 | ||||
Veröffentlicht in: | IABSE Symposium Venice 2010 | ||||
|
|||||
Seite(n): | 544-545 | ||||
Anzahl der Seiten (im PDF): | 8 | ||||
Jahr: | 2010 | ||||
DOI: | 10.2749/222137810796025870 | ||||
Abstrakt: |
Two way hollow core slabs with void formers between the upper and lower static reinforcement are getting more and more popular in Germany. The reduction of the dead load of the slab resulting from the cavities allows larger spans compared to solid slabs with the same depth. Since the void formers are spherical or ellipsoid shaped the slab maintains its biaxial strength. However some open questions regarding the bearing behaviour of two way hollow core slabs still prevent a wider spread of these innovative structural elements. The goal of this research project was to answer these open questions. While the bending strength of a two way hollow core slab is almost the same like for a solid slab its shear strength is significantly smaller. Therefore in this research project the shear strength of two way hollow core slabs was investigated. 13 large scale tests and corresponding nonlinear finite element calculations were conducted to prove that the shear strength of a two way hollow core slab is at least 50% of the shear strength of an equivalent solid slab. Another open question was the stiffness of the slab in arbitrary directions which leads to the question whether the internal forces of a two way hollow core slab should be determined like they are determined for a solid slab or rather like they are determined for a ribbed slab. The test and the nonlinear finite element calculations of this research project have shown that it is correct to calculate the internal forces of a two way hollow core slab in the same way like they are calculated for a solid slab. |
||||
Stichwörter: |
Scherfestigkeit
|