0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Analysis of RC Beams with Shallow-angle Bent-up Bars Using Strut-Tie Models

Autor(en):
Medium: Tagungsbeitrag
Sprache(n): Englisch
Tagung: 35th Annual Symposium of IABSE / 52nd Annual Symposium of IASS / 6th International Conference on Space Structures: Taller, Longer, Lighter - Meeting growing demand with limited resources, London, United Kingdom, September 2011
Veröffentlicht in:
Jahr: 2011
Abstrakt:

Recently there has been a renewed research interest to study the optimum design approach in reinforced concrete. The primary intention of the research is to re-evaluate on whether are there any other designs that could provide a different and better load carrying mechanism than the current conventional reinforcement. As a result, shallow-angle bent-up bars were introduced. This paper presented experimental and analytical works carried out on shallow-angle bent-up bars. The outcome from this study had shown some very promising results. It had shown that shallow-angle bent-up bars gave satisfactory performance in term of strength and deformation compared with standard reinforcement. For analysis wise, strut-and-tie models were used as an analytical tool to assess the internal forces and the failure behaviour. It had shown that it gave accurate prediction on the internal stress distributions even for unconventional design like shallow-angle bent-up bars.

Stichwörter:
Biegeträger Stahlbeton Stabwerksmodelle Schub
Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen.
  • Über diese
    Datenseite
  • Reference-ID
    10065345
  • Veröffentlicht am:
    03.10.2011
  • Geändert am:
    05.07.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine