Structures - September 2023

Erschienen:	September 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Zhong, Chang-jun / Feng, Ruo-Qiang / Huang, Yong-qi / Li, Hu-yang	6A13-T6 high-strength aluminium alloy columns under axial compression: Experiments, finite element analysis and design recommendations	71-84
Ye, Mengxuan / Zeng, Zhiping / Li, Peicheng / Rao, Huiming / Huang, Zhibin / Wang, Weidong / Qahtan, Ayoub A. S.	Analysis of early-age mechanics and crack of the base plate on the bridge in summer based on eXtended FEM	2403-2418
Cao, Liang / Zhou, Hailei / Peng, Weibing / Liu, Jiepeng / Chen, Y. Frank	Analytical analysis on the static support reactions of single-column pier bridges using the grey wolf optimizer	2003-2012
Ali, Mujahid / Lai, Sai Hin	Artificial intelligent techniques for prediction of rock strength and deformation properties – A review	1542-1555
Koohmishi, Mehdi / Azarhoosh, Alireza / Naderpour, Hosein	Assessing the key factors affecting the substructure of ballast-less railway track under moving load using a double-beam model and random forest method	1388-1405
Fedin, K. V. / Pechenegov, D. A. / Kolesnikov, Yu. I. / Ngomayezwe, L. / Yurkevich, N. V.	Assessment of the technical condition of the Sukhumi Lighthouse, Abkhazia using passive seismic standing waves method	2053-2059
Fu, Wei / Zhou, Ruohua / Guo, Ziye	Automatic bolt tightness detection using acoustic emission and deep learning	1774-1782
Kanwal, Shaheen / Khan, Qasim S. / Sheikh, M. Neaz / Qazi, Asad U. / Hadi, M. N. S.	Axial compressive behaviour of GPC filled FRP Tubes: Experimental and analytical investigations	650-663
Yu, Min / Liao, Wenlan / Liu, Sumei / Wang, Tan / Yu, Chunlei / Cheng, Shanshan	Axial compressive performance of ultra-high performance concrete-filled steel tube stub columns at different concrete age	664-676
Tianxiang, Pi / Jin, Gan / Pengcheng, Li	Axial restraint performance of small span-to-depth ratio coupling beams reinforced with diagonal and rhombic bars	1219-1234
Lyu, Xuetao / Zhang, Tong / Wang, Weiwei / Zhang, Liqiang / Xue, Guofeng	Behavior of concrete-filled circular steel tubular stub columns exposed to corrosion and freeze–thaw cycles	2266-2279
Ricci, Paolo / Di Domenico, Mariano / Verderame, Gerardo M.	Behaviour factor and seismic safety of reinforced concrete structures designed according to Eurocodes	677-689
Wei, Jie / Li, Jun / Liu, Zhongxian / Wu, Chengqing / Liu, Jian	Behaviour of hybrid polypropylene and steel fibre reinforced ultra-high performance concrete beams against single and repeated impact loading	324-337
Chen, Yuliang / He, Qin / Chen, Zongping / Liang, Xin	Bending restoring force model of angle-steel reinforced concrete columns under combined torsion	2186-2198
Karamanli, Armagan / Wattanasakulpong, Nuttawit / Lezgy-Nazargah, M. / Vo, Thuc P.	Bending, buckling and free vibration behaviours of 2D functionally graded curved beams	778-798
Santra, Atanu / Roy, Rana	Bond-slip at anchorage under unidirectional and bidirectional seismic excitation: Search for an efficient mathematical model	1622-1644
Tariq, Faraz / Ahmad, Subhan / Bhargava, Pradeep	Bond-slip response of corroded SD bars with recycled coarse aggregate concrete	2036-2052
Fard, Milad Afarini / Farhad, Daneshjoo / Georgakis, Christos Thomas / Andersen, Lars Vabbersgaard	Capacity assessment of segment-to-segment joints in precast unbonded segmental bridge decks under vertical seismic mainshock and aftershocks	2358-2369
Sadeeq, Haval Tariq / Abdulazeez, Adnan Mohsin	Car side impact design optimization problem using giant trevally optimizer	39-45
Shan, Wenchen / Zhou, Xuhong / Lin, Xuchuan / Gao, Pan	Collapse risk-targeted seismic design of concrete-filled steel tube frame-RC core tube structures	1470-1480
Jaberi, Vahid	Collapse-based design method for simple seismic design of complex structural systems such as linked column frame system	482-497
Alshboul, Odey / Almasabha, Ghassan / Al-Shboul, Khaled F. / Shehadeh, Ali	A comparative study of shear strength prediction models for SFRC deep beams without stirrups using Machine learning algorithms	97-111
Wu, Zhangyu / Zhang, Jinhua / Yu, Hongfa / Wu, Qingling / Da, Bo	Computer-aided investigation of the tensile behavior of concrete: Relationship between direct and splitting tensile strength	453-467
Lima, Carmine / Nigro, Francesco / Martinelli, Enzo	Conceptual design formulation and comparative assessment of a seismic retrofit procedure for existing RC structures based on combining member- and structure-level techniques	1096-1108
Yan, Jia-Bao / Cao, Jixiang / Xie, Peng / Xie, Jian	Concrete-filled circular stainless-steel tubular columns subjected to low-temperature axial compression	916-932
Liu, Yang / Wu, Tao / Hu, Yi / Kou, Dawei	Corrosion-induced cracking behavior of lightweight aggregate concrete: Experimental and numerical study	2124-2142
Martins, J. P. / Correia, J. / Ljubinkovic, F. / Simões da Silva, L.	Cost optimisation of steel I-girder cross-sections using genetic algorithms	379-388
Yu, Yao / Gong, Xiaobo / Li, Jialin / Gao, Guangjun / Li, Jian	Crashworthiness performance and optimization of multi-cell aluminum tubes under axial loading	1556-1571
Dong, Xitong / Wang, Lai / Xu, Zhifeng / Liu, Liyuan / Guan, Shangshang / Chen, Haitao	Cyclic performance of T-Shaped CFST column to steel beam joint with vertical stiffener	1659-1674
Xiong, Chunbao / Wang, Meng / Chen, Wen	Data-driven structural dynamic characteristics investigation by combining RDT and IVMD method	2295-2306
Gong, Junhu / Zhai, Wanming / Wang, Weixu / Wang, Bin / Sun, Tijia / Kechine, Wasyhun Afework	Deformation mapping between pier settlement and maglev track for high-speed multi-span simply supported maglev bridge	1980-1991
Pérez-Valcárcel, J. / López-César, Isaac R. / Muñoz-Vidal, M. / Freire-Tellado, M. J. / Suárez-Riestra, F.	Deployable tubular bar structures with laterally confined flattened ends	112-122
Mandani, Ali Mahmoudi / Hejazi, Farzad / Nikkhoo, Ali	Development of hybrid rubber damper-restrainer (HRDR) system for structures under sever dynamic excitation	1354-1387
Douier, Kais / Hawileh, Rami / Abdalla, Jamal A. / Al Nuaimi, Nasser / Sohail, Muazzam Ghous	Durability performance of RC beams strengthened with CFRP laminates and galvanized steel mesh bonded with epoxy and mortar systems	338-353
Mei, Shiyi / Caprani, Colin / Cantero, Daniel	Dynamic amplification of multi-span simply-supported prestressed concrete girder viaducts subjected to multi-body heavy vehicles	587-605
Parida, Siddharth S. / Bose, Supratik / Apostolakis, Georgios	Earthquake data augmentation using wavelet transform for training deep learning based surrogate models of nonlinear structures	638-649
Tang, Hongyuan / Hou, Linjian / Yuan, Zhijun / Jia, Yigang / Wang, Yuzhuo	Eccentric compressive behavior of square concrete-filled stainless steel tube (CFSST) stub columns	1920-1935
Shutong, Chen / Kassem, Moustafa Moufid / Jalilluddin, Aimi Munirah / Nazri, Fadzli Mohamed / Wenjun, An	The effect of bridge girder-bearing separation on shear key pounding under vertical earthquake action – A state-of-the-art review	2445-2460
Kumar, V. / Singh, S. J. / Saran, V. H. / Harsha, S. P.	Effect of elastic foundation and porosity on buckling response of linearly varying functionally graded material plate	1186-1203
Hashemi, Ashkan	Effect of serviceability limit state and over-strength mechanism on seismic performance of self-centring low damage structures with friction connections	231-244
Wang, Hao / Li, Anbang	Effects of mixed corrosion damage on constitutive relation and ductile fracture behavior of butt-welded joints under cyclic loading	2341-2357
Lv, Yigang / Qiao, Jie / Han, Weiwei / Su, Miao / He, Xianliang / Peng, Hui	Effects of the embedding depth on the interfacial bond performance of horizontally NSM CFRP strips to concrete structures	1084-1095
Lupattelli, Arianna / Kita, Alban / Salciarini, Diana / Venanzi, Ilaria / Ubertini, Filippo	Effects of the soil–structure interaction and seismic vertical component on the response of a concrete surge tank	310-323
Sifan, Mohamed / Nguyen, Hoang / Nagaratnam, Brabha / Thamboo, Julian / Poologanathan, Keerthan / Makul, Natt	Efficient mix design method for lightweight high strength concrete: A machine learning approach	1805-1822
Li, Shen / Xu, Taotao / Li, Xiaolei / Liang, Gang / Xi, Hong	Elastic stiffness and bearing mechanism of eccentrically braced steel frames	818-833
Dolati, A. / Ghodratian-Kashan, S. M. / Maleki, S.	End diaphragm and interior cross frame modeling in steel tub girder superstructures	147-159
Oladapo, Bankole I. / Bowoto, Oluwole K. / Adebiyi, Victor A. / Ikumapayi, Omolayo M.	Energy harvesting analysis of hip implantin achieving sustainable development goals	28-38
Di, Wang / Yue, Zhao / Junfeng, Wang / Qi, Wang / Xiaodong, Liu	Establishment and effect analysis of traffic load for long-span bridge via fusion of parameter correlation	1992-2002
Sadeghi, Ali / Moghadam, Abdolreza S. / Fathi, Farshid	Evaluation and comparison of seismic performance of industrially and traditionally constructed buildings in Iran, a case study of Yasooj	747-762
Dai, Jian-Cheng / Wang, Dong-Sheng / Chen, Xiao-yu / Zhang, Rui / Sun, Zhi-guo	Evaluation of ground motion intensity measures for time-history dynamic analysis of isolated bridges	1306-1319
Weng, Guangyuan / Ding, Junfeng / Cao, Jingting / Hui, Yang	Experiment and numerical simulation of stress detection for oil and gas pipelines based on magnetic stress coupling of pipeline steel	2478-2490
Ma, Rujin / Li, Fangkuan / Hu, Xiaohong / Ge, Baixue / He, Qifeng	Experiment study on vortex-induced vibration of a twin-box girder with large cantilever plates	891-907
Adam, Maher A. / Said, Mohamed / Salah, Ahmed / Elsheikh, Ahmed	Experimental and analytical study of high performance concrete beams reinforced with Basalt FRP bars	510-530
Gao, Xing / Wang, Wei / Teh, Lip H.	Experimental and numerical investigations of tensile behavior of slip-critical blind bolts anchored in concrete-filled steel tubes	354-369
Chen, Liang / Yan, Jing / Wu, Zhigang / Yang, Dahai / Li, Jianluan / Xiang, Nailiang	Experimental and numerical study on shear behavior of shear pockets between ultra-high-performance and normal concrete for precast girder bridges	1645-1658
El Khoury, Karim / Ridley, Imogen / Vollum, Robert / Forth, John / Shehzad, Muhammad / Elwakeel, Abobakr / Nikitas, Nikolaos / Izzuddin, Bassam	Experimental assessment of crack prediction methods in international design codes for edge restrained walls	1447-1459
Monserrat-López, Andrea / Nogales, Alejandro / de la Fuente, Albert	Experimental characterization of concrete-to-concrete interface shear strength design-oriented constitutive parameters	1172-1185
Qiao, Qiyun / Ding, Ruilin / Cao, Wanlin	Experimental investigation on axial local compressive behavior of square concrete-filled double tubular stub columns	2157-2174
Duo, Yongyu / Yang, Yan / Liu, Xiaogang / Yue, Qingrui / Xu, Guowen	Experimental investigation on the friction behavior of CFRP plate in contact with sandblasted steel plate	2491-2503
Xue, Yan-Jie / Wang, Wen-Wei / Tian, Jun / Wu, Zeng-Han	Experimental study and analysis of RC beams shear strengthened with FRP/SMA composites	1936-1948
Yong, Xin / Wang, Zhongmin / Li, Xiaolei	Experimental study and theoretical analysis on lateral stiffness of RC frame-frame truss composite wall	701-717
Wu, Mingze / Li, Shuai / Fan, Shenggang / Lu, JinYu	Experimental study on soil-structure interaction of steel frame under seismic excitations	2280-2294
Liu, Renlong / Cheng, Zhanqi / Yang, Sen / Zhang, Pu / Hu, Yi / Ye, Ning	Experimental study on the performance of shear connections between local UHPC slabs and GFRP girders	1966-1979
Zhao, Jianfeng / Cui, Qifan / Li, Xi / Xue, Zhenxing / Wang, Yutian	Experimental study on the plastic hinge region of precast segmental bridge piers strengthened by CFRP	1853-1860
Li, Bo-Fan / Wang, Xian-Tie / Lv, Bao-Hua / Yan, Xi-Feng / Yan, Chen-Zhuang	Experimental study on torsional behavior of tapered high strength thin-walled concrete-filled double-skin steel tubular columns	1823-1838
Tapia, Nicolás F. / Almazán, José L. / Valdebenito, Nathaly / Reyes, Sergio I.	Experimental validation of an energy-dissipating anchoring system for continuously-supported storage tanks	2324-2340
Song, Jintao / Yuan, Shuai / Xu, Zengguang / Li, Xinru	Fast inversion method for seepage parameters of core earth-rock dam based on LHS-SSA-MKELM fusion surrogate model	160-168
Hızal, Çağlayan	FDD based modal identification of structures using least squares approach	1071-1083
Ou, Jialing / Shao, Yongbo / Huang, Chao / Chen, Yu / Bi, Xin	Flexural behavior of circular concrete filled steel tubular members strengthened by CFRP sheets	201-214
Lee, Jun-Seop / Haroon, Muhammad / Kang, Seong-Hun / Shin, Kyung-Jae / Lee, Hee-Du	Flexural behavior of large-scale U-shaped steel-concrete infilled composite beams with flat and embossed webs	1949-1959
Pinho, Rui / Scattarreggia, Nicola / Orgnoni, Andrea / Lenzo, Simone / Grecchi, Giulia / Moratti, Matteo / Calvi, Gian Michele	Forensic estimation of the residual capacity and imposed demand on a ruptured concrete bridge stay at the time of collapse	1595-1606
Murugan, Komathi / Sengupta, Amlan Kumar	Formulation of a generalized truss analogy for the analysis of shear behavior of short jacketed columns	1572-1583
Zhou, Qi / Lu, Wensheng / Peng, Xiaoli / Wang, Guowei / Zhang, Peng	Frequency calculation method and wind-induced dynamic response of cable net façades considering the façade stiffness	718-726
Aymelek, Abdullah / Yanık, Yusuf / Demirtaş, Betül / Yildirim, Omer / Çalik, İsmet / Türker, Temel	Full-scale structural evaluations of İskenderpaşa minaret	1028-1044
Kiani, Houman / Nasrollahzadeh, Kourosh	Fuzzy logic approach for seismic fragility analysis of RC frames with applications to earthquake-induced damage and construction quality	1122-1143
Abdulateef, Wisam S. / Hejazi, Farzad	Fuzzy logic based adaptive vibration control system for structures subjected to seismic and wind loads	1507-1531
Wang, Weinan / Gong, Jinxin / Wu, Xingyi / Wang, Xingchao	A general equation for estimation of time-dependent prestress losses in prestressed concrete members	278-293
Fazlalipour, Neda / Showkati, Hossein	Geometric properties and imperfections influence on buckling behavior of Variable-Thickness steel cylindrical shells subjected to combined Loading: Experimental and numerical study	834-852
Ansari, Mohd Asif / Shariq, Mohd / Mahdi, Fareed	Geopolymer concrete for clean and sustainable construction – A state-of-the-art review on the mix design approaches	1045-1070
Sanfui, Subhajit / Sharma, Deepak	GPU-based mesh reduction strategy utilizing active nodes for structural topology optimization	570-586
Sidhu, Navneet / Goyal, Shweta / Sudhakara Reddy, M.	Healing of cracks in concrete by using bacterial spores immobilized in metakaolin	1144-1158
Ye, Xubo / Su, Zhanguo / Dahari, Mahidzal / Su, Yiping / Alsulami, Samirah H. / Aldhabani, Musaad S. / Abed, Azher M. / Ali, H. Elhosiny / Bouzgarrou, Souhail Mohamed	Hybrid modeling of mechanical properties and hardness of aluminum alloy 5083 and C100 Copper with various machine learning algorithms in friction stir welding	1250-1261
Ma, Guoyao / Jiang, Qi / Zong, Xiju / Wang, Jie	Identification of flexural rigidity for Euler–Bernoulli beam by an iterative algorithm based on least squares and finite difference method	138-146
Al-shawafi, Ali / Zhu, Han / Haruna, S. I. / Bo, Zhao / Laqsum, Saleh Ahmed / Borito, Said Mirgan	Impact resistance of ultra-high-performance concrete retrofitted with polyurethane grout material: Experimental investigation and statistical analysis	185-200
Xu, Gang / Guo, Tong / Li, Aiqun / Zhang, Ruijun / Zhu, Ruizhao / Liu, Faqi	Influence of ambient temperature on seismic performance of elastomeric isolation structural system	1763-1773
Yang, Jie / Jia, Dongyan / Cheng, Lin / Tong, Fei / Ma, Chunhui	The influence of different back analysis conditions on the stochastic back analysis of arch dam material Parameters: A case study	2307-2323
Bashir, Shamsul / Mandhaniya, Pranjal / Akhtar, Nasim	Influence of plasticity and vibration isolators on an underground floating slab track using finite element analysis	1783-1792
Yang, Xiang / Ren, Qingwen / Ren, Xuhua / Chen, Zaitie	Influence of simulation method of water storage process on valley deformation and working behavior of arch dam	1109-1121
Kumari, G. Jyothi / Mousavi, Seyed Sina / Bhojaraju, Chandrasekhar	Influence of thermal cycles and high-temperature exposures on the residual strength of hybrid steel/glass fiber-reinforced self-consolidating concrete	1532-1541
Gholami, Mahsa / Ranjbargol, Mahdi / Yousefzadeh, Reza / Ghorbani, Zhaleh	Integrating three smart predictive models using a power-law committee machine for the prediction of compressive strength in masonry made of clay bricks and cement mortar	951-964
Jain, Monika / Khapre, Rajendra / Tandon, Harsh	Investigation of anchorage plate opening on bursting force	1704-1709
Liu, Yufeng / Wang, Zhen / Lu, Hongjia / Ye, Jun / Zhao, Yang / Xie, Yi Min	Layout optimization of truss structures with modular constraints	1460-1469
Xu, Yuanqing / Cui, Bing / Chen, Zhengqing / Zhang, Taike / Liu, Jie / Li, Xuanzhi / Bai, Xiaoyu	Longitudinal displacement control of a long-span suspension bridge under random traffic loads using a polyimide friction damper	1861-1873
Sun, Yao / Zhang, Kuangye / Gong, Guobin	Material properties of structural aluminium alloys after exposure to fire	2105-2111
Feng, Jimeng / Tan, Yumei / Ma, Kaimeng / Zhang, Junru / Ma, Jianchi / Liu, Jiaming	Mechanisms of slope instability induced by two-hole oversized tunnels with small clearances underneath	294-309
Massone, Leonardo M. / Valenzuela, Jaime / Rojas, Fabian	Minimum longitudinal reinforcement in rectangular and flanged reinforced concrete walls	1342-1353
Martins, David / Gonilha, José / Correia, João R. / Silvestre, Nuno / Guerreiro, Luís / Branco, Fernando	Monotonic and cyclic sway behaviour of 2-dimensional frames made of pultruded GFRP I-section profiles	2461-2477
Pereira, Rhuan José Ribeiro / Alves de Almeida, Fabricio / Gomes, Guilherme Ferreira	A multiobjective optimization parameters applied to additive manufacturing: DOE-based approach to 3D printing	1710-1731
Han, Sun-Jin / Ishida, Tetsuya / Tsuchiya, Satoshi	Multiscale finite element analysis of earthquake-induced damage on underground RC culverts: The role of reinforcing bar corrosion	763-777
Clemens, Philipp / Schumacher, Axel	Nested loop approach for topology and shape optimization of crash-loaded deep-drawn components using contact forces for the inner loops	2013-2022
Arani, H. Khani / Shariyat, M.	Nonlinear 2D-DQ volume-preservative global–local dynamic analysis of composite sandwich plates with soft hyperelastic cores and viscoelastic Winkler-Pasternak foundations	727-746
Chen, Lei / Franky, Kapnang / Zhang, Hao / Xiong, Xiaoli	Nonlinear stability analysis of high-strength steel cylindrical shells under global bending	1320-1329
Bai, Haiwen / Huang, Zhen / Qin, Maojiang / Ma, Shaokun / Zhang, Chenlong	Nonlinear static behavior analysis of single/double-layer frame tunnels with mortise and tenon joint	876-890
Saini, Rahul / Gopalakrishnan, S.	Nonlocal boundaries and paradoxes in thermoelastic vibrations of functionally graded Non-Uniform cantilever nanobeams and annular nanoplates	1292-1305
Li, Yanchun / Li, Ruibo / Zhou, Tianhua / Han, Aihong / Xie, Yanfen	Novel design method of screwed connections of cold-formed steel built-up plates	2433-2444
Wang, Gang / Li, Huokun / Liu, Bo / Liu, Hanyue / Huang, Wei / Liao, Weisheng	A novel dynamic model parameter updating methodology of a sluice based on vibration response	215-230
Zhu, Aixi	A novel high-precision photogrammetric technique for monitoring subway tunnel deformation	2217-2231
Li, Yafeng / Li, Shouying / Tan, Ping	A novel tuned mass damper inerter: optimal design, effectiveness comparison, and robustness investigation	1262-1276
Zhu, He / Han, Zhaobing / Liu, Cheng / Zhang, Yue / Chen, Wenlong / Pan, Shengnan	Numerical Analysis of Fretting Wear Characteristics of Aluminum Cable Steel Reinforced Strands	1497-1506
Cheraghi, Kambiz / TahamouliRoudsari, Mehrzad / Kiasat, Sasan	Numerical and analytical investigation of U-shape dampers and its effect on steel frames	498-509
Beltrán, Juan Felipe / Pino, Sebastián	A numerical approach to bound the asymmetrically surface-damaged metallic strands response accounting for bending stiffness nonlinearity: Damage and structural integrity evaluation purposes	606-625
Lu, Li / Liao, Kailan / Habibi, Mostafa / Safarpour, Hamed / Ali, H. Elhosiny	Numerical methods to predict aero thermally induced vibrations of a curved pipe structure reinforced by GPLs	1607-1621
Xu, Li / Hu, Hong-Song / Lan, Yan-Ting / Liu, Ru-yue / Xia, Hao-Jian	Numerical study on the behavior of eccentrically loaded square spiral-confined high-strength concrete-filled steel tube columns	2112-2123
Ghorbanzadeh, Samira / Seyedi Hosseininia, Ehsan	A numerical study on the seismic design of buildings seated over an RSM layer	46-58
Afshar, Majid Amin / Aghaeipour, Sepehr / Adlparvar, Mohammad Reza / Azad Mazloum, Abbas	Optimal dynamic performance of partially Base-Isolated structure under seismic Excitations: Harmonic, Earthquake, and random	263-277
Song, Jian / Bi, Kaiming / Ma, Ruisheng / Xu, Kun / Han, Qiang	Optimum design and performance evaluation of inerter‐based dampers for seismic protection of adjacent bridges	1277-1291
Aydogdu, Ibrahim / Kilic, Vahide / Akin, Alper	Optimum design of pin-jointed aluminum structures to AA-ASD using three Meta-heuristic algorithms	1406-1422
Ahmad, Muhammad / Hameed, Rashid / Shahzad, Shaban / Sohail, Muazzam Ghous	Performance evaluation of loadbearing compressed fully recycled aggregate concrete bricks	1235-1249
Van Cao, Vui / Trinh, Thong Minh Nguyen	Performance of circular concrete filled steel tubes after fire exposure: Experiments	1331-1341
Hossain-Zada, Mohammad Kazem / Kolagar, Saber / Fakoor, Maziar / Vahedi, Amirhossein / Nematzadeh, Mahdi / Tabari, M. M. R.	Post-heating flexural behavior of reinforced concrete beam with lap-spliced bar and feasibility of improving flexural performance by adding hybrid fibers	965-982
Yue, Peng / Ma, Juan / Dai, Chang Ping / Zhang, Jun Fu / Du, Wenyi	Probabilistic framework for reliability analysis of gas turbine blades under combined loading conditions	1437-1446
Geng, Fangfang / Li, Aiqun / Liu, Wei / Wang, Libin	Probabilistic seismic performance assessment of low-damage self-recovering prefabricated concrete frame subjected to near-field pulse-like earthquakes	1839-1852
Barzgar Torghabeh, Ali / Tehranizadeh, Mohsen / Taslimi, Arsam	Probability of collapse evaluation for high-rise reinforced concrete buildings in the event of near-fault earthquakes and soil-structure interaction effects	1675-1691
Alshaikh, Ibrahim M. H. / Abadel, Aref A. / Tuladhar, Rabin / Alwathaf, Ahmed Hasan / Nehdi, Moncef L.	Progressive collapse resistance of post-fire cellular beam-column substructures with various web-opening shapes	1874-1893
Izadpanah, Mehdi / Zibasokhan, Hassan / Roussis, Panayiotis C. / Asteris, Panagiotis G.	Pure-bending yielding dissipater for the seismic retrofitting of reinforced concrete buildings with soft-story irregularity	933-950
Colmenares, D. / Costa, G. / Civera, M. / Surace, C. / Karoumi, R.	Quantification of the human–structure interaction effect through full-scale dynamic testing: The Folke Bernadotte Bridge	2249-2265
Zuo, Peng / Shi, Xianjie / Huang, Zhou / Luo, Jingrun / Ge, Renwei	Random vibration analysis of composite laminated conical–cylindrical cabin structures of air vehicles considering thermal load	626-637
Zhao, Desheng / Shao, Yahui / Hu, Huimin / Hu, Guangjian / Wang, Yixian	RBF-PSO-IS: An innovative metamodeling for reliability analysis of bridge's vortex-induced vibration	59-70
Li, Shiyuan / Tan, Ping / Song, Xiao / Yang, Kui	Real-complex hybrid modal response spectrum method for seismically base-isolated structures	2068-2085
Wang, Zhichao / Hu, Minggen / Lai, Jinxing / Xie, Shaohua / Cai, Yuancheng	Reliability analysis method for tunnel structural design: Brief review and relevant prospects	1894-1905
Zheng, Zhou / Li, Yanlong / Wen, Lifeng / Zhang, Ye / Wang, Ting	Reliability analysis of an embankment dam slope based on an ellipsoid model and PSO-ELM	2419-2432
Zhengjie, Cheng / Jitao, Yao	Reliability analysis of reinforced concrete columns with random eccentricity designed by Chinese code	908-915
Fan, Yujiang / Chen, Yuxi / Xu, Jinbao / Li, Huanfang / Ding, Jiaxiong	Research on the resilience model of a new prefabricated shear wall structure	2060-2067
Hua, Wen / Ye, Jihong / Ye, Jian	Resilience assessment and seismic risk assessment of reticulated shell structures considering multiple uncertainties	1584-1594
Shen, Li / Yuting, Gao / Hongchen, Wang / Ningjun, Du / jianbo, Tian	Response modification factor of high strength steel frame with D-eccentric brace using improved pushover analysis method	1732-1762
Tarabin, Mohamad / Maalej, Mohamed / Altoubat, Salah / Talha Junaid, M.	Review of the bond behavior between reinforcing steel and Engineered cementitious Composites	2143-2156
Zhao, Jing-Shan / Sun, Han-Lin / Sun, Xiaocheng / Ma, Zheng-Hua / Zhang, Shan-Bin	Screw statics of spatial structures and mechanisms	411-426
Wang, Bin / Wu, Meng-Zhen / Zhang, Li-Peng / Cai, Wen-Zhe / Shi, Qing-Xuan	Seismic behavior and shear capacity of shear-dominated T-shaped RC walls under cyclic loading	557-569
Xu, Dan / Xu, Kai-Yuan / Wang, Xiao-Ting / Wang, Jing-Feng / Yan, Jia-Bao / Wang, Tao	Seismic behaviour of connections between replaceable coupling beam and double skin composite shear wall	2389-2402
Ahmed, Mohammed M. / Mamazizi, Arman / Soltanabadi, Reza / Jalali, Himan Hojat	Seismic performance assessment of steel plate shear walls equipped with passive dampers	1204-1218
Montazeri, Maryam / Namiranian, Pejman / Akhlagh Pasand, Ali / Aceto, Luca	Seismic performance of isolated buildings with friction spring damper	1481-1496
Lei, Song / Liu, Laijun / Wu, Fangwen / Lin, Weiwei / Peng, Kai / Cao, Jincheng	Seismic performance of short precast columns with UHPC grouted sleeve connections: An experimental and numerical study	427-440
Lovon, Holger / Silva, Vitor / Vicente, Romeu / Ferreira, Tiago Miguel	Seismic vulnerability assessment of Portuguese masonry buildings	853-865
He, Chang / Liu, Renpeng / He, Ziwei	Seismic vulnerability assessment on porcelain electrical equipment based on Kriging model	1692-1703
Chen, Chen / Zhang, Xueliang / Hu, Wenchao / Wen, Bangchun	Self-balancing characteristics of three self-synchronous linear motion mechanical oscillators	389-410
Dong, Shuxiong / Xie, Weili / Wei, Muwang / Liu, Kaihua	Shear design of recycled aggregate concrete beams using a data-driven optimization method	123-137
Liu, Cong / Chen, Xin / Mao, Xiaoyong / Zhu, Bin / Liu, Bing	Shear resistance of an anchoring coupler applied in demountable concrete connection at varying shear positions	866-875
Medeiros, Klaus André de Sousa / Palhares, Rodolfo De Azevedo / Parsekian, Guilherme Aris / Grahan Shrive, Nigel	Simplified frame models to simulate the in-plane load–displacement response of multi-story, perforated, partially grouted masonry walls	2086-2104
Khansefid, Ali / Yadollahi, Seyed Mahmoudreza / Müller, Gerhard / Taddei, Francesca	Soil-structure-interaction effects on the seismic performance of a masonry building under geothermal power plants induced earthquakes	468-481
Zhang, Ji-gang / Yang, Guang-chao / Ma, Zhe-hao / Zhao, Guo-liang / Song, Han-yu	A stacking-CRRL fusion model for predicting the bearing capacity of a steel-reinforced concrete column constrained by carbon fiber-reinforced polymer	1793-1804
Ortega, Javier / Mendes, Nuno / Vasconcelos, Graça	Structural behavior of steel tie connections in masonry veneer walls: Proposal of a simplified approach for practice	1159-1171
Abdolkhani, Amin / Raoufi, Reza	Structural modal identification and damage detection with incomplete data utilized by genetic algorithm optimization	16-27
Gad, Mahmoud Anwar / Nikbakht, Ehsan / Faez, Muhammad / Rusydan, Ameer / Abu Bakar, Naima Bt	Structural performance of sandwich steel-concrete-steel composites utilising engineered cementitious composites	545-556
Jin, Jiang / Ming, Wu / Jian, Liu / Pengcheng, Zhang	Study of recycled aggregate concrete-filled circular steel columns with H-shaped steel reinforcement	1960-1965
Ning, Ning / Ma, Zhongguo John / Zhang, Jigang / Jiang, Shan	Study on properties of Ultra-Lightweight Insulated Cementitious Composites for concurrent seismic and energy improving of existing RC frames	2175-2185
Liu, Liping / Zhong, Rongpan / Yu, Yanjia / Li, Ruifeng	Study on seismic performance of reinforced concrete stilted building with steel braces in mountainous areas	2199-2216
Wang, Wenzhao / Dan, Danhui / Jian, Fangliang	Study on strain characteristic function for performance evaluation of high-speed railway steel truss bridge	441-452
Li, Wenxiong / Chen, Suiyin / Huang, Huan	System reduction-based approximate reanalysis method for statically indeterminate structures with high-rank modification	1423-1436
Wang, Feihu / Gao, Danying	Tensile behavior analysis and prediction of steel fiber recycled fine aggregate concrete	2232-2248
Asghari, Hamidreza / Omeman, Zkaria / Noël, Martin / Hajiloo, Hamzeh	Tensile properties of carbon fabric-reinforced cementitious matrix (FRCM) at high temperatures	85-96
Sun, Haoding / He, Haoxiang / Cheng, Yang / Cheng, Shitao	Theoretical and experimental research on damping performance of suspended multiple mass pendulums damper	169-184
Taati, Ehsan / Ahmadian, M. T.	Thermoelastic resonance analysis of BNNT-reinforced nanocomposite beams heated by internal thermal source	1011-1027
Lotfi, Vahid / Dehghanmarvasty, Solmaz	Time harmonic analysis of concrete gravity dam-reservoir systems by mixed High order-Wavenumber approach for general reservoir bottom condition	1906-1919
Ge, Baixue / Yang, Yanzhi / Kim, Sunyong	Time-dependent multi-hazard seismic vulnerability and risk assessment of deteriorating reinforced concrete bridges considering climate change	995-1010
Sheng-Xue, He	Truss optimization with frequency constraints using the medalist learning algorithm	1-15
Zhang, Ying / Gao, Shan / Du, Erxia / Fang, Youliang	Ultimate tensile properties of bolted stiffened angle connections	2370-2388
Ahmed, Mizan / Liang, Qing Quan / Patel, Vipulkumar Ishvarbhai / Gohari, Soheil / Hamoda, Ahmed	Unified numerical model for performance analysis of various cross-sections of concrete-filled stainless-steel tubular stub columns under axial loading	799-817
Chen, Liping / Cao, Ze / Lopes, António M. / Wu, Ranchao / Dong, Xueping / Chen, YangQuan / Xu, Kang	A variable fractional-order sliding mode controller for uncertain vibration building structures	2023-2035
Hu, Hongqiang / Bao, Yangjuan / Guo, Xiaopeng / Han, Xu / Gan, Gang	Verification of a stochastic dynamic analysis method by shaking table tests of a slope retaining system	531-544
Gremer, Nadia / Adam, Christoph	Vertical floor acceleration spectra for regular steel frame structures	690-700
Zhu, Junsheng / Fang, Zhigeng / Liu, Xiaojun / Zhang, Jingru / Kiani, Yaser	Vibration characteristics of skew sandwich plates with functionally graded metal foam core	370-378
Jiang, Jinghui / Xia, Chaoyi / Yao, Jia / Sun, Qikai / Xia, He	Vulnerability analysis of HSR bridge under near-field blast based on response surface method	983-994
Vendramell Ferreira, Felipe Piana / Shamass, Rabee / Santos, Luis Fernando Pinho / Tsavdaridis, Konstantinos Daniel / Limbachiya, Vireen	Web-post buckling resistance calculation of perforated high-strength steel beams with elliptically-based web openings for EC3	245-262

Über diese
Datenseite
IssueID
70127
Veröffentlicht am:
13.06.2023
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - September 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - September 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.