Structures - Februar 2022

Erschienen:	Februar 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Suparp, Suniti / Joyklad, Panuwat / Sirisonthi, Athasit / Hussain, Qudeer	Analysis of full-scale precast post-tension (FPP) girder for straddle monorail – Experimental and FEA study	521-532
Irhayyim, Amir / Gunaratne, Manjriker / Fioklou, Ameh	Assessment of scoured bridges subjected to ship impact	635-649
Du, Yansheng / Fu, Mingxuan / Chen, Zhihua / Yan, Jia-Bao / Zheng, Zihan	Axial compressive behavior of CFRP confined rectangular CFT columns using high-strength materials: Numerical analysis and carrying capacity model	997-1020
Zang, Jian-bo / Wu, Bo	Axial compressive behavior of square steel tubular columns filled with steel stirrups reinforced recycled lump concrete	735-751
Wang, Jian / Xia, Junwu / Chang, Hongfei / Han, Youmin / Yu, Linli	The axial compressive experiment and analytical model for FRP-confined gangue aggregate concrete	98-110
Ngo, Ngoc-Tri / Pham, Thi-Phuong-Trang / Le, Hoang An / Nguyen, Quang-Trung / Nguyen, Thi-Thao-Nguyen	Axial strength prediction of steel tube confined concrete columns using a hybrid machine learning model	765-780
Zhao, Chao / Zhou, Yi / Zhong, Xingu / Wang, Gang / Yang, Qunyu / Hu, Xiang	A beam-type element for analyzing the eccentric load effect of box girder bridges	1-12
Shiping, Yin / Boxue, Wang / Chenxue, Zhang / Shuang, Liu	Bond performance between textile reinforced concrete (TRC) and brick masonry under conventional environment	392-403
Choudhury, Arshad Hussain / Laskar, Aminul Islam	Combined effect of cold joint and yielded hoop reinforcement on cyclic behaviour of seismically detailed RC beam-column joints	879-891
Zafimandimby, Mampiandra N. H. / Liu, Yongjian / Yan, Biao / Jiang, Lei / Ma, Yinping	Comparison of strengthening methods for tubular T joint corresponding to each static failure mode	589-618
Jia, Zhi-Lu / Shi, Yan-Li / Wang, Wen-Da / Ji, Sun-Hang	Compression-bending behaviour of steel-reinforced concrete-filled circular steel tubular columns with preload	892-911
Chen, Shenggang / Li, Chaolai / Guo, Quanquan / Cheng, Shaohong / Diao, Bo	Computational analysis of shear deformation effects on open thin-walled beams	678-690
Ma, Yue / Bai, Rui / Yang, Li-Ping / Yang, Hong-xia / Guo, Sheng-dong	Coupling effects of the different temperature patterns and storage pressures on the buckling of a steel silo	168-188
Govahi, Ehsan / Salkhordeh, Mojtaba / Mirtaheri, Masoud	Cyclic performance of different mitigation strategies proposed for segmental precast bridge piers	344-357
Nassiraei, Hossein / Rezadoost, Pooya	Development of a probability distribution model for the SCFs in tubular X-connections retrofitted with FRP	233-247
Abolhasani, Amirmohamad / Samali, Bijan / Dehestani, Mehdi / Libre, Nicolas Ali	Effect of rice husk ash on mechanical properties, fracture energy, brittleness and aging of calcium aluminate cement concrete	140-152
Roy, Krishanu / Lau, Hieng Ho / Fang, Zhiyuan / Masood, Rehan / Ting, Tina Chui Huon / Lim, James B. P. / Chieng Chen Lee, Vincent	Effects of corrosion on the strength of self-drilling screw connections in cold-formed steel structures-experiments and finite element modeling	1080-1096
Basim, Mohammad Ch. / Pourreza, Farzaneh / Mousazadeh, Meysam / Akbari Hamed, Arash	The effects of modeling uncertainties on the residual drift of steel structures under mainshock-aftershock sequences	912-926
Abdelbaset, Hesham / Cheng, Bin / Tian, Liang / Li, Hai-Ting / Zhao, Jian	Enhancing fatigue resistance of rib-to-floorbeam welded connections in orthotropic steel bridge decks by using UHPC layer: An experimental study	153-167
Gao, Xiangling / Peng, Honglu / Li, Jie	Evolution of the yield penetration and bond stress in RC exterior beam-column joints under cyclic loading	703-718
Ali, Mujahid / Abbas, Sheraz / Garcez de Azevedo, Afonso Rangel / Teixeira Marvila, Markssuel / Alqurashi, Muwaffaq / Khan, Muhammad Imran / Rafiq, Waqas / Hussein, Enas E.	Experimental and analytical investigation on the confinement behavior of low strength concrete under axial compression	303-313
Quan, Guan / Qi, Jiafeng / Wu, Hui / Ye, Jun / Gao, Boqing / Xu, Nengbing / Hu, Bo	Experimental and numerical study on the performance of new prefabricated connections for free-form grid structures	1050-1067
Boyajian, David / Zirakian, Tadeh / Boyajian, Christof / Chen, Shen-En	Experimental and statistical dry-fracture assessment of the CFRP-concrete interface bond	580-588
Bisht, Kunal / Ramana, P. V.	Experimental investigation of strength, drying shrinkage, freeze and thaw and fire attack properties of concrete mixes with beverage glass waste as fine aggregate	358-371
Alirezaei, Mehdi / Hosseini Hashemi, Behrokh	Experimental studies of the seismic behavior of EKBFs subjected to lateral loading	511-520
Nie, Gui-bo / Zhang, Chen-xiao / Wang, Zhi-yong / Xu, Wei-dan / Shi, Yu-jie	Experimental study of collapse behavior of single-layer cylinder shells with infilled walls	793-804
MohamedSalih, Mariwan Mirhaj / Yousif, Ali Ramadhan	Experimental study on torsional behavior of thin- and thick-walled RC box-girders using BFRP bars and steel stirrups under combined torsion-shear-moment	549-564
Aliakbari, Karim / Nejad, Reza Masoudi / Akbarpour Mamaghani, Tohid / Pouryamout, Pooya / Rahimi Asiabaraki, Hossein	Failure analysis of ductile iron crankshaft in compact pickup truck diesel engine	482-492
Qu, Songzhao / Li, Quangeng / Wang, Yi / Yuan, Jun / Sun, Qing	Failure pattern and load distribution mechanism of stiffeners in the tube–gusset plate connection: Testing, numerical modelling and theoretical analysis	951-978
Smith, Calvin / Hill, Blair / Wheatley, Greg / Nejad, Reza Masoudi / Sina, Nima	Fatigue reliability assessment of the new design of rear suspension system of the JCU motorsport car	473-481
Ma, Yinping / Liu, Yongjian / Wang, Kun / Ma, Tianyu / Yang, Jian / Liu, Junping / Gao, Yimin / Li, Hui	Flexural behavior of concrete-filled rectangular steel tubular (CFRST) trusses	32-49
Wang, Zhangming / Zhang, Nan / Wang, Shilei	Geometry control of special-shaped arch pylon considering seasonal temperature changes during construction	416-427
Shojaei, Iman / Rahami, Hossein	A heuristic swarm-based optimization method using multi-variate normal distributions with self-adaptive variance matrices	372-391
Jiang, Jiafei / Xue, Weichen / Luo, Jie / Qin, Duan	Hysteresis behavior of precast concrete composite shear walls with improved vertical connections	533-548
Leblouba, Moussa / Altoubat, Salah / Karzad, A. S. / Maalej, Mohamed / Barakat, Samer / Metawa, Abdulrahman	Impact response and endurance of unreinforced masonry walls strengthened with cement-based composites	262-279
Qi, Hong-hui / Du, Yong / Jiang, Jian / Li, Guo-Qiang	Improved tensile membrane action model of composite slabs at elevated temperatures	13-31
Abusafaqa, Fayez R. / Samaaneh, Mohammed A. / Dwaikat, Monther B. M.	Improving ductility behavior of sway-special exterior beam-column joint using ultra-high performance fiber-reinforced concrete	979-996
Du, Ting / Zhou, Bo / Liu, Bin / Ye, Hao / Peng, Ji-Liang	The influence of opposite-side high temperature on the frozen behavior of containment concrete under single-side salt freeze-thaw method	854-863
Qian, Kai / Wang, Dong-Fang / Huang, Ting / Weng, Yun-Hao	Initial damage and residual behavior of RC beam-slab structures following sudden column removal - numerical study	650-664
Mensah, Comfort / Min, Benzhi / Bonsu, Alex Osei / Wang, Zhenqing	Investigating the effect of steel fiber content on bond behavior between externally bonded CFRP-to-concrete joints	565-579
Zhu, Yan Fei / Yao, Yao / Huang, Ying / Chen, Chang Hong / Zhang, Hui Yun / Huang, Zhaohui	Machine learning applications for assessment of dynamic progressive collapse of steel moment frames	927-934
Nguyen, Nam V. / Nguyen, Hoang D. / Dao, Nhan D.	Machine learning models for predicting maximum displacement of triple pendulum isolation systems	404-415
Xu, Chen / Zhang, Lepeng / Su, Qingtian / Abbas, Sheraz	Mechanical behavior of a novel steel–concrete joint in concrete-composited hybrid continuous bridges	291-302
Freire-Tellado, M. J. / Muñoz-Vidal, M. / Pérez-Valcárcel, J.	Modified bistable modules for bias deployable structures	111-125
Hashemi, Seyede Vahide / Miri, Mahmoud / Rashki, Mohsen / Etedali, Sadegh	Multi-objective optimal design of SC-BRB for structures subjected to different near-fault earthquake pulses	1021-1031
Vinh, Pham Van / Son, Le Truong	A new first-order mixed beam element for static bending analysis of functionally graded graphene oxide powder-reinforced composite beams	463-472
Shiravand, Ali / Asgari, Masoud	A new method for design and calculating the mechanical properties and energy absorption behavior of cellular structures using foam microstructure modeling based on Laguerre tessellation	428-444
Liao, Yu / Shi, Shaoqing / Chen, Shou / Ming, Xinwen / Ge, Liangbin	Numerical evaluation of the retrofit effectiveness for polyurea-woven glass fiber mesh composite retrofitted RC slab subjected to blast loading	215-232
Ye, Yong / Zhang, Shi-Jiang / Zhou, Kan / Guo, Zi-Xiong	Numerical study on behavior of eccentrically loaded concrete-filled bimetallic tubes	935-950
Meddage, D. P. P. / Lewangamage, C. S. / Weerasuriya, A. U.	On the deviation of mean pressure coefficients in wind loading standards for a low-rise, gable-roofed building with boundary walls	50-64
Yang, Dabin / Sun, Xiangyi / Zhou, Guangen / Jiang, Hongquan / Sun, Litai / He, Ting / Yu, Chunjie / Wei, Ye / Liu, Peng	Optimization of continuous drive friction welding process for AA6061-T6 circular pipe and conical head	1068-1079
Youssf, Osama / Mills, Julie E. / Ellis, Mark / Benn, Tom / Zhuge, Yan / Ma, Xing / Gravina, Rebecca J.	Practical Application of Crumb Rubber Concrete in Residential Slabs	837-853
Pan, Xiaowang / Qu, Wenzhong / Zou, Lianghao / Xu, Guoji / Song, Jie	A practical combination method for wind-induced responses of high-rise buildings: Based on the correlation of extremes	126-139
Khalilian, Marzieh / Shakib, Hamzeh / Basim, Mohammad Ch.	Proposed time-dependent approach to seismic loss evaluation through the life cycle of a structure	280-290
Truong, Gia Toai / Kim, Chang-Soo / Choi, Kyoung−Kyu	Punching shear strength of RC column footings considering soil–footing friction	314-329
Kamil Akin, S. / Bahadir, Fatih / Balik, Fatih Suleyman / Turan, Mustafa	The RC samples with infill walls strengthened with steel truss wires	248-261
Vlachakis, Georgios / O'Hearne, Nicole / Mendes, Nuno / Lourenço, Paulo B.	Seismic assessment of metallic neo-gothic church: Deterioration and safety of early structural design	330-343
Huang, Yijie / Qi, Xibo / Li, Chuanxi / Gao, Peng / Wang, Zhankui / Ying, Jingwei	Seismic behaviour of seawater coral aggregate concrete columns reinforced with epoxy-coated bars	822-836
Lu, Shengcan / Wang, Zhan / Pan, Jianrong / Wang, Peng	The Seismic Performance Analysis of Semi-rigid Spatial Steel Frames Based on Moment-Rotation Curves of End-plate Connection	1032-1049
Kim, Sung-Wan / Yun, Da-Woon / Jeon, Bub-Gyu / Kim, Jae-Bong	Seismic performance evaluation of a vertical pipe connected with rigid groove joints using a system and a component	691-702
Sabermahany, Hadi / Attarnejad, Reza	Seismic performance of buildings supported by a shallow doubly-curved shell raft foundation	619-634
Daskiran, Mehmet Mustafa / Daskiran, Esma Gizem / Gencoglu, Mustafa	Seismic performance of PVA textile cementitious composites used as permanent formwork in full-scale circular RC columns	445-462
Ahmadi Taleshian, Hamed / Mirzagoltabar Roshan, Alireza / Vaseghi Amiri, Javad	Seismic pounding mitigation of asymmetric-plan buildings by using viscoelastic links	189-214
Gupta, Tanmay / Sandhu, Dikshit	Seismic response of horizontally curved bridges in combination with skewed abutments	864-878
Saghir, Farrukh / Gohari, Soheil / Moslemi, Navid / Abdi, Behzad / Moloudi, Saeed / Burvill, Colin / Smith, Alan / Lucas, Stuart	A semi-empirical approach to evaluate the effect of constituent materials on mechanical strengths of GFRP mortar pipes	493-510
Ahmed, Inas Mahmood / Tsavdaridis, Konstantinos Daniel	Shear connection of prefabricated ultra-lightweight concrete slab systems (PUSSTM)	65-97
Fan, Shengxin / Zhang, Yao / Ma, You-Xin / Tan, Kang Hai	Strut-and-tie and finite element modelling of unsymmetrically-loaded deep beams	805-821
Zhang, Dongdong / Mo, Changjin / Gao, Yifeng / Yuan, Hui / Li, Fei / Zhao, Qilin / Yang, Jun	Theoretical evaluation of the equivalent torsional rigidity of a unique GFRP-metal box-truss composite girder	781-792
Liu, Yu / Huang, Shan-Shan / Burgess, Ian	Three-dimensional modelling of composite frames with ductile connections in fire	665-677
Zhong, Jian / Ni, Ming / Hu, Huiming / Yuan, Wancheng / Yuan, Haiping / Pang, Yutao	Uncoupled multivariate power models for estimating performance-based seismic damage states of column curvature ductility	752-764
Ribeiro, D. / Bragança, C. / Montenegro, P. A. / Carvalho, H. / Costa, B. / Marques, F.	Wind-induced fatigue analysis of high-rise guyed lattice steel towers	719-734

Über diese
Datenseite
IssueID
60270
Veröffentlicht am:
07.01.2022
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structures - Februar 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structures - Februar 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.