Structures - Dezember 2019

Erschienen:	Dezember 2019

Autor(en)	Titel	Seite(n)
Selvaraj, Sivaganesh / Madhavan, Mahendrakumar	Behaviour of Gypsum Sheathed Point-symmetric Cold-formed Steel members: Assessment of AISI Design Method	76-97
Liu, Sanfeng / Zhou, Yinzhi / Zheng, Qing / Zhou, Jiannan / Jin, Fengnian / Fan, Hualin	Blast responses of concrete beams reinforced with steel-GFRP composite bars	200-212
Saleh, Najia / Ashour, Ashraf / Sheehan, Therese	Bond between glass fibre reinforced polymer bars and high - strength concrete	139-153
TahamouliRoudsari, Mehrzad / Moradi Garoosi, AllahReza / Alipour, Ali / Torkaman, Morteza / Moghadam Abrishami, Hossein / Rambarzini, Mehran / Doudman Koushki, Alireza / Khodaparast, Shahrokh / Bonyadirad, Shahab	Comparing the seismic performances of shallow beam connections with accordion webs and reduced sections: An experimental study	421-434
Truong, Viet-Hung / Papazafeiropoulos, George / Pham, Van-Trung / Vu, Quang-Viet	Effect of multiple longitudinal stiffeners on ultimate strength of steel plate girders	366-382
Pournaghshband, A. / Afshan, S. / Theofanous, M.	Elevated temperature performance of restrained stainless steel beams	278-290
Narendra, Perumālla Venkata Rāma / Singh, Konjengbam Darunkumar	Equivalent-Resistance-Capacity-Method (ERCM) for the design of steel Elliptical-Hollow-Sections (EHSs) under axial compression	28-42
Govindan, Senthil kumar / Madhavan, Mahendrakumar	Experimental and analytical study of lightweight floor system built-up with cold-formed profile steel sheet and hot-rolled steel plate (CFPSS-HRSP)	291-309
Mohammadi, Masoud / Kafi, Mohammad Ali / Kheyroddin, Ali / Ronagh, Hamid Reza	Experimental and numerical investigation of an innovative buckling-restrained fuse under cyclic loading	186-199
Vernardos, Stelios / Gantes, Charis	Experimental behavior of concrete-filled double-skin steel tubular (CFDST) stub members under axial compression: A comparative review	383-404
Goldston, M. W. / Remennikov, A. / Saleh, Zein / Sheikh, M. Neaz	Experimental investigations on the behavior of GFRP bar reinforced HSC and UHSC beams under static and impact loading	109-123
Haque, Mohammad Najmol / Maki, Takeshi	Experimental study on time-dependent deformation of hybrid steel–PRC girder with headed stud shear connections under sustained loading	327-340
El-Zeadani, Mohamed / Saifulnaz, M. R. Raizal / Amran, Y. H. Mugahed / Hejazi, F. / Jaafar, M. S. / Alyousef, Rayed / Alabduljabbar, Hisham	Flexural strength of FRP plated RC beams using a partial-interaction displacement-based approach	405-420
Liu, Yan / Yan, Junbo / Li, Zhen / Huang, Fenglei	Improved SDOF and numerical approach to study the dynamic response of reinforced concrete columns subjected to close-in blast loading	341-365
Al-Gasham, Thaar S. / Mhalhal, Jasim M. / Jabir, Hussain A.	Influence of post-heating on the behavior of reinforced self-compacting concrete hollow columns	266-277
Siam, Ahmad / Ezzeldin, Mohamed / El-Dakhakhni, Wael	Machine learning algorithms for structural performance classifications and predictions: Application to reinforced masonry shear walls	252-265
Arjomandi, Kaveh / Araki, Yumi	Monitoring time in operational modal tests with broad and narrow band excitations	245-251
Chen, Wenwen / Ye, Jihong	A new simplified calculation model of CFS composite exterior walls under fire conditions	53-64
Najafgholipour, M. A. / Arabi, A. R.	A nonlinear model to apply beam-column joint shear failure in analysis of RC moment resisting frames	13-27
Phocas, Marios C. / Alexandrou, Kristis / Anastasiadou, Ioanna	Numerical analysis of a hybrid cable bending-active plate structure	175-185
Moradpour, S. / Dehestani, M.	Optimal DDBD procedure for designing steel structures with nonlinear fluid viscous dampers	154-174
Do, Tin V. / Pham, Thong M. / Hao, Hong	Proposed design procedure for reinforced concrete bridge columns subjected to vehicle collisions	213-229
Maheri, Mahmoud R. / Torabi, Ashkan	Retrofitting external RC beam-column joints of an ordinary MRF through plastic hinge relocation using FRP laminates	65-75
Falcone, Roberto / Carrabs, Francesco / Cerulli, Raffaele / Lima, Carmine / Martinelli, Enzo	Seismic retrofitting of existing RC buildings: a rational selection procedure based on Genetic Algorithms	310-326
Tahir, Muhammad / Wang, Zhenyu / Ali, Kanwar Majid / Isleem, Haytham F.	Shear behavior of concrete beams reinforced with CFRP sheet strip stirrups using wet-layup technique	43-52
Alrebeh, Salih K. / Ekmekyapar, Talha	Structural behavior of concrete-filled steel tube short columns stiffened by external and internal continuous spirals	98-108
Orlowski, Kristopher / Kristombu Baduge, Shanaka / Mendis, Priyan / Oktavianus, Yusak	Structural behaviour of prefabricated stressed-skin engineered timber composite flooring systems	230-244
Stylianidis, P. M. / Petrou, M. F.	Study of the flexural behaviour of FRP-strengthened steel-concrete composite beams	124-138
Christy, D. Lincy / Pillai, T. M. Madhavan / Nagarajan, Praveen	Thin plate element for applied element method	1-12

Autor(en)

Titel

Seite(n)

Selvaraj, Sivaganesh / Madhavan, Mahendrakumar

Behaviour of Gypsum Sheathed Point-symmetric Cold-formed Steel members: Assessment of AISI Design Method

76-97

Liu, Sanfeng / Zhou, Yinzhi / Zheng, Qing / Zhou, Jiannan / Jin, Fengnian / Fan, Hualin

Blast responses of concrete beams reinforced with steel-GFRP composite bars

200-212

Saleh, Najia / Ashour, Ashraf / Sheehan, Therese

Bond between glass fibre reinforced polymer bars and high - strength concrete

139-153

TahamouliRoudsari, Mehrzad / Moradi Garoosi, AllahReza / Alipour, Ali / Torkaman, Morteza / Moghadam Abrishami, Hossein / Rambarzini, Mehran / Doudman Koushki, Alireza / Khodaparast, Shahrokh / Bonyadirad, Shahab

Comparing the seismic performances of shallow beam connections with accordion webs and reduced sections: An experimental study

421-434

Truong, Viet-Hung / Papazafeiropoulos, George / Pham, Van-Trung / Vu, Quang-Viet

Effect of multiple longitudinal stiffeners on ultimate strength of steel plate girders

366-382

Pournaghshband, A. / Afshan, S. / Theofanous, M.

Elevated temperature performance of restrained stainless steel beams

278-290

Narendra, Perumālla Venkata Rāma / Singh, Konjengbam Darunkumar

Equivalent-Resistance-Capacity-Method (ERCM) for the design of steel Elliptical-Hollow-Sections (EHSs) under axial compression

28-42

Govindan, Senthil kumar / Madhavan, Mahendrakumar