Structural Concrete - v. 25, n. 2 (Januar 2024)

Erschienen:	Januar 2024

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
	fib‐news	1481-1488
Jin, Jianqing / Wu, Tongge / Zhang, Zhijun / Fan, Juan / Lee, Xuong	Application of optimization‐based estimation analysis for predicting the compressive strength of eco‐friendly modified geopolymer concrete	1489-1489
Chien‐Ta, Chen / Shing‐Wen, Tsai / Liang‐Hao, Hsiao	Automated machine learning techniques for estimating of elastic modulus of recycled aggregate concrete	1324-1342
Li, Xiao / Li, Rui / Hu, Zhijian	Bearing capacity of UHPC‐NC connection structure in negative moment zone of PC beam bridges	796-809
Zeng, Jun‐Jie / Zeng, Wei‐Bin / Zhuge, Yan / Zhou, Jie‐Kai / Quach, Wai‐Meng / Feng, Ran	Behavior and modeling of FRP grid‐reinforced ultra‐high‐performance concrete under uniaxial tension	1185-1207
dos Santos, Fernanda Cristinna Alonso / de Oliveira Campos, Cláudia Maria / Taissum Cardoso, Daniel Carlos	Behavior of textile‐reinforced concrete columns	1223-1240
Szczepański, Konrad / Kotynia, Renata	Bending moments redistribution in two‐span reinforced concrete beams reinforced with FRP bars based on collected data research	1076-1091
Belletti, Beatrice / Calcavecchia, Biagio / Ferretti, Daniele / Ravasini, Simone	Capacity assessment of uncorroded and corroded dapped‐end beams by NLFE and strut‐and‐tie based methods	1275-1304
Dhahir, Mohammed K. / Marx, Steffen / Zdanowicz, Katarzyna	Chemical prestressing of concrete structures; state of the art review	1450-1464
Kazemi, Ramin / Golafshani, Emadaldin Mohammadi / Behnood, Ali	Compressive strength prediction of sustainable concrete containing waste foundry sand using metaheuristic optimization‐based hybrid artificial neural network	1343-1363
Richter, Bertram / Herbers, Max / Marx, Steffen	Crack monitoring on concrete structures with distributed fiber optic sensors—Toward automated data evaluation and assessment	1465-1480
Foster, Stephen J. / Bentz, Evan	Design of UHPC prestressed girders for shear	780-795
He, Xiangfeng / Huang, Feixin / Qiu, Minghong / Yan, Banfu / Shao, Xudong	Development of fully precast lightweight steel–UHPC composite bridge	773-776
Raza, Ali / Elhag, Ahmed Babeker / Ouni, Mohamed Hechmi El / Arshad, Muhammad	Effectiveness of FRP confinement for low strength recycled aggregate concrete compressive members having optimized combination of fibers	1092-1104
Qu, Bing	Estimation of elastic modulus of recycle aggregate concrete based on hybrid and ensemble‐hybrid approaches	1364-1387
Šarvaicová, Simona / Borzovič, Viktor / Halvonik, Jaroslav	Experimental investigation of punching shear behavior of flat slabs supported by rectangular columns and loaded with various load patterns	1404-1417
Deng, Shuwen / Huang, Zhiming / Yan, Banfu / Shen, Lian / Huang, Zheng / Wang, Yi	Experimental study and optimal design of UHPC T‐shaped beam	992-1005
Liu, Zhihua / Chen, Yuliang / Shen, Jianzeng / Zheng, Wenjing / Luo, Zhen	Experimental study on mechanical properties of recycled aggregate concrete with polypropylene fiber under combined compression‐shear loading	810-825
Feng, Ran / Tang, Jing‐Pu / Wang, Fangying / Wang, Sen / Zeng, Jun‐Jie / Zhu, Ji‐Hua	Experiments on shear behavior of reinforced concrete continuous beams strengthened by C‐FRCM	1052-1075
Li, Dong / Hejazi, S. M. Ali S. / Jin, Liu / Du, Xiuli	An extended universal morphological model for concrete mode‐I fracture: Formulations and preliminary verifications	1388-1403
Su, Yan‐li / Shang, Jia‐qi / Zhang, Pu / Xu, Shi‐zhan / Sheikh, Shamim Ahmed	Flexural behavior of beams strengthened with GFRP bars and high‐performance fiber‐reinforced concrete	1208-1222
Jafari, Zahra / Mostofinejad, Davood	Flexural strengthening of RC beams by advanced concrete canvas	1165-1184
Ahmed, Mizan / Liang, Qing Quan / Patel, Vipulkumar Ishvarbhai / Hamoda, Ahmed	Inelastic analysis of octagonal concrete‐filled steel tubular short columns under eccentric loading	1418-1433
Aidarov, Stanislav / Nogales, Alejandro / Tošić, Nikola / de la Fuente, Albert	Influence of fiber orientation on flexural‐based design of steel fiber‐reinforced concrete slabs: Experimental and numerical program	956-972
Khan, M. S. / Ibrahim, S. M. / Shariq, M.	Investigation on the influence of fiber fraction and orientation on the mechanical properties of fiber‐reinforced concrete slabs	886-903
Ruiz, Miguel Fernández / Redaelli, Dario / Nogales Arroyo, Alejandro / Monserrat‐López, Andrea / Bourqui, Didier / de la Fuente Antequera, Albert	Macrosynthetic fibers as replacement of conventional steel reinforcement for concrete of partition walls	1031-1051
Chen, Yuliang / Wang, Shuangyi / Liang, Xin / Ye, Peihuan	Microscopic mechanism analysis and failure criterion study of glass fiber recycled concrete under three‐dimensional compressive stress state	850-868
Van Den Hende, Karel / Helderweirt, Stef / Botte, Wouter / Matthys, Stijn / Lombaert, Geert / Caspeele, Robby	Modeling and probabilistic evaluation of repair strategies in the initiation phase of chloride‐induced corrosion of the reinforcement of concrete structures	1257-1274
Benedito, André Vitor / Vanalli, Leandro / Krahl, Pablo Augusto / Martins, Carlos Humberto / de Andrade Silva, Flávio	A modeling strategy for the shear and flexural performance prediction of SFRC beams without stirrups accounting for the variability of properties	973-991
Ali, Shehroze / Ahmad, Junaid / Iqbal, Umair / khan, Suliman / Hadi, Muhammad N. S.	Neural network‐based models versus empirical models for the prediction of axial load‐carrying capacities of FRP‐reinforced circular concrete columns	1148-1164
Qasim, M. / Zhang, Y. X. / Lee, C. K.	Numerical and analytical modeling of SPH‐ECC strengthened RC beams	1129-1147
Cervenka, Vladimir / Červenka, Jan / Rymeš, Jiří	Numerical simulation of concrete structures—From research to engineering application	751-772
Katzer, Jacek / Skoratko, Aneta / Seitl, Stanislav	Properties of steel fiber reinforced mortar‐plastic columns with the cross‐section in a form of a Cesaro fractal	904-915
Rashid, Khuram / Fatima, Miral / Daud, Maheen / Ju, Minkwan / Wang, Yi	Pull‐off capacity of FRP–concrete composite bonded with epoxy/geopolymer at elevated temperature	1241-1256
Abadel, Aref A.	Rehabilitation of post‐heated rectangular reinforced concrete columns using different strengthening configuration	1434-1449
Bozkurt, Hasan Basri / Genç, Oğuz Kağan / Anil, Özgür / Şahmaran, Mustafa / Bayer, İsmail Raci	Rocket blast resistance of the fully demountable high performance FRC tongue and groove blocks	826-849
Tang, Porsiem / Amin, Ali / Gilbert, R. Ian / Kaufmann, Walter	Shrinkage cracking in restrained FRC members containing conventional reinforcement	1006-1017
Vu, Vu Truong / Tran, Tuan Kiet / Kim, Dong joo / Nguyen, Duy‐Liem / Tran, Ngoc Thanh	Strain rate sensitivity of strain‐hardening fiber‐reinforced concrete subjected to dynamic direct tensile loading	869-885
Mosallam, Ayman S. / Ghaban, Naif / Mirnateghi, Ehsan / Khalek, Ashraf Abdel / Mahdy, Ibrahim / Xin, Haohui	Structural evaluation of RC overhang cantilever slab strengthened with FRP near‐surface mounted (NSM) composites for bridge applications	1105-1128
Wang, Huayi / He, Xiongjun / Zhou, Ming / Wu, Chao / He, Jia	Study on bending failure and crack characteristics in ductile fiber‐reinforced concrete beams	916-934
Zhu, Ji‐Hua / Shen, Haowei / Wei, Liangliang	A study on HyFRCC consisting of PE and carbon fiber: Investigation of electrical and fracture properties based on orthogonal design	1018-1030
Ashrafian, Ali / Behnood, Ali / Golafshani, Emadaldin Mohammadi / Panahi, Elahe / Berenjian, Javad	Toward presenting an ensemble meta‐model for evaluation of pozzolanic mixtures incorporating industrial by‐products	1305-1323

Über diese
Datenseite
IssueID
72179
Veröffentlicht am:
24.04.2024
Geändert am:
24.04.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structural Concrete - v. 25, n. 2 (Januar 2024)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structural Concrete - v. 25, n. 2 (Januar 2024)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.