Structural Concrete - v. 24, n. 1 (Februar 2023)

Erschienen:	Februar 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Bekaert, Michiel / Van Tittelboom, Kim / De Schutter, Geert	3D printed concrete as stay‐in‐place formwork: Mechanics during casting and curing	738-755
Gao, Danying / Guo, Yajiang / Pang, Yuyang / Chen, Gang / Shi, Ming / Ding, Chong / Liu, Dongxu	Analysis and prediction of the compressive and splitting tensile performances for the novel multiple hooked‐end steel fiber reinforced concrete	1452-1470
Pan, Jiaojiao / Han, Jian / Lou, Tao / Deng, Mingke	Analytical solution of the bond strength between ribbed steel bar and engineered cementitious composites considering the fiber bridging effect	599-611
Katzer, Jacek / Kobaka, Janusz	Anti‐terrorist concrete shields absorbing projectiles with no ricochets	6-8
Fox, Matthew J. / Furinghetti, Marco / Pavese, Alberto	Application of the new Italian assessment guidelines to a 1960s prestressed concrete road bridge	583-598
Granata, Michele Fabio / La Mendola, Lidia / Messina, Davide / Recupero, Antonino	Assessment and strengthening of reinforced concrete bridges with half‐joint deterioration	269-287
Bayraktar, Oguzhan Yavuz / Yarar, Gokhan / Benli, Ahmet / Kaplan, Gökhan / Gencel, Osman / Sutcu, Mucahit / Kozłowski, Marcin / Kadela, Marta	Basalt fiber reinforced foam concrete with marble waste and calcium aluminate cement	1152-1178
Andrade, Carmen / Oller, Sergio / Trujillo, Francisco‐Javier Perez	Basis for calculation the residual mechanical properties of corroding bars	257-268
Bolzoni, Fabio / Ormellese, Marco / Pedeferri, MariaPia / Proverbio, Edoardo	Big milestones in the study of steel corrosion in concrete	115-126
Xiao, Liangli / Dai, Siyuan / Jin, Qingping / Peng, Shuang	Bond performance of GFRP bars embedded in steel‐PVA hybrid fiber concrete subjected to repeated loading	1597-1611
Wang, Jian / Xu, Qiang	The combined effect of load and corrosion on the flexural performance of recycled aggregate concrete beams	359-373
Schultheiß, Annika Lidwina / Patel, Ravi A. / Vogel, Michael / Dehn, Frank	Comparative study of probabilistic modeling approaches for chloride ingress in concrete structures with macro‐cracks	345-358
Novak, Lukas / Červenka, Jan / Cervenka, Vladimir / Novák, Drahomír / Sýkora, Miroslav	Comparison of advanced semi‐probabilistic methods for design and assessment of concrete structures	771-787
Ribeiro, Gonçalo / Almeida, João / Silva Lobo, Paulo	Conceptual design of transfer structures	1070-1082
Menga, Antonia / Kanstad, Terje / Cantero, Daniel / Bathen, Lise / Hornbostel, Karla / Klausen, Anja	Corrosion‐induced damages and failures of posttensioned bridges: A literature review	84-99
Shayanfar, Javad / Barros, Joaquim A. O. / Rezazadeh, Mohammadali	Cross‐sectional and confining system unification on peak compressive strength of FRP confined concrete	1531-1545
Pejatović, Marko / Ruiz, Miguel Fernández / Muttoni, Aurelio	Design of slender and squat reinforced concrete members with shear reinforcement	985-1001
Trandafir, Alexandru N. / Proestos, Giorgio T. / Mihaylov, Boyan I.	Detailed crack‐based assessment of a 4‐m deep beam test specimen	756-770
Cao, Huazhang / Jiang, Nan / Zhou, Chuanbo / Li, Haibo / Cai, Zhongwei / Huang, Yiwen	Dynamic response and safety assessment of inner‐wall corroded concrete pipeline in service subjected to blasting vibration	451-467
Al‐Bukhaiti, Khalil / Yanhui, Liu / Shichun, Zhao / Abas, Hussein	Dynamic simulation of CFRP‐shear strengthening on existing square RC members under unequal lateral impact loading	1572-1596
Liu, Zhenzhen / Huang, Dongming / Lu, Yiyan / Li, Shan	Eccentric loading behavior of steel tube columns filled with steel‐fiber‐reinforced recycled concrete	653-679
Messina, Davide / Proverbio, Edoardo	Effect of prestressing corrosion on failure in bridges	227-238
Witkowska‐Dobrev, Joanna / Szlachetka, Olga / Malarski, Maciej / Czajkowska, Justyna / Miturski, Maciej / Nowak, Piotr / Dohojda, Marek	Effect of sewage on compressive strength and geometric texture of the surface of concrete elements	468-484
Russo, Nicoletta / Gastaldi, Matteo / Schiavi, Luca / Strini, Alberto / Lollini, Federica	Effects of cracks on chloride‐induced corrosion initiation and propagation of carbon and stainless steel rebar	156-169
Lamawansa, Yasas / Hippola, Sameera / Wijesundara, Kushan Kalmith	Effects of sectional kinematic constraints in fiber element formulations on the load‐deformation response of reinforced concrete elements	906-936
Bui, Linh Van Hong	Effects of the bond properties of ETS‐GFRP bar to concrete on the shear behavior of ETS‐GFRP-strengthened RC beams	1642-1655
Matsukawa, Kazuto / Amin, A. F. M. S. / Nakano, Yoshiaki	Effects of the tensile strength and elastic modulus of low‐strength brick aggregate concrete on the ultimate shear strength of short reinforced concrete columns	972-984
Kareem, Kamaran Mohammed / Ahani, Elshan / Pantò, Bartolomeo	Evaluating simplified macromodeling approaches of simulating infilled reinforced concrete frames with openings	721-737
Kasuga, Akio	Evolution of bridge construction by nonmetallic technologies	143-155
Chen, Yuliang / Li, Tang / Jiang, Rui / Ye, Peihuan / Cai, Jinwen	Experimental and damage modeling research on compression‐shear behavior of carbon fiber recycled aggregate concrete	1471-1485
Zhao, Qiu / Zhang, Hao / Yang, Jianping / Yang, Xiaoqiang / Wang, Ying / Lai, Zhichao	Experimental and numerical studies on flexural behavior of fiber continuous joints of precast UHPC decks	1328-1347
Sun, Yanyan / Xu, Jing / Zuo, Gong	Experimental and numerical studies on mechanical behavior of stiffened concrete‐filled square steel tube columns subjected to axial compression	802-817
Zhang, Xiaohui / Yu, Shuo / Jin, Hao / Bi, Xiangli / Zhou, Shunhua	Experimental investigation of corrosion effect on bending deflection of shield tunnel segment containing transverse cracks	411-422
Gebreyesus, Yosef Y. / Karinski, Yuri S. / Dancygier, Avraham N. / di Prisco, Marco	Experimental investigation of cracking localization in RC beams with steel fibers	1386-1401
Karimi Pour, Arash / Shirkhani, Amir / Kirgiz, Mehmet Serkan / Farsangi, Ehsan Noroozinejad	Experimental investigation of GFRP‐reinforced concrete columns made with waste aggregates under concentric and eccentric loads	1670-1688
Tello, Noor / Abed, Farid / Elrefai, Ahmed / El‐Maaddawy, Tamer / Alhoubi, Yazan	Experimental investigation of pre‐damaged circular RC columns strengthened with fabric‐reinforced cementitious matrix (FRCM)	1656-1669
Höffgen, Jan P. / Mohs, Matthias / Lamparter, Sarah / Malárics‐Pfaff, Viktória / Dehn, Frank	Experimental methods for the analysis of the durability behavior of concrete joints	423-433
Höffgen, Jan P. / Mohs, Matthias / Sonderegger, Eric / Malárics‐Pfaff, Viktória / Dehn, Frank	Experimental methods for the analysis of the tensile behavior of concrete joints	788-801
Zhou, Haijun / Qi, Xuan / Lin, Zhiyao / De Filippo, Michele / Liu, Jian / Ma, Cong / Xing, Feng	An experimental study on bond behaviors of reinforced concrete under fatigue loading and corrosion	504-520
Lv, Xiaoyong / Yu, Zhiwu / Liao, Zhenyu	Experimental study on flexural behavior of a novel variable‐grade prefabricated concrete slab with surrounding composited	892-905
Bu, Shuangshuang / Yu, Feng / Chen, Taiyao / Fang, Yuan / Qin, Yin	Experimental study on seismic behavior of circular steel tube confined reinforced self‐stressing steel slag concrete columns	1102-1117
Li, Wei / Ye, Heng / Sun, Linzhu	Experimental study on seismic behavior of T‐shaped steel fiber reinforced concrete columns	612-633
Yang, Kejia / Su, Hongzhi / Dai, Tao / Li, Kunliang / Lin, Yiwei	Experimental study on the flexural tensile properties of aligned steel fiber–reinforced reactive powder concrete members	1486-1502
Arano Barenys, Assis / Colombo, Matteo / Martinelli, Paolo / Øverli, Jan Arve / Hendriks, Max A. N. / Kanstad, Terje / di Prisco, Marco	Failure characteristics of reinforced concrete circular slabs subsequently subjected to fire exposure and static load: An experimental study	872-891
Ci, Junchang / Ahmed, Mizan / Zhou, Daxing / Hou, Liqun / Chen, Shicai	Flexural performance of circular concrete‐filled double steel tubular members: Testing, modeling, and strength predictions	818-839
Miluccio, Giacomo / Losanno, Daniele / Parisi, Fulvio / Cosenza, Edoardo	Fragility analysis of existing prestressed concrete bridges under traffic loads according to new Italian guidelines	1053-1069
Luo, Daming / Dong, Hui / Niu, Ditao	Geographic division of exposure environment for concrete structure based on fuzzy clustering‐rough set information entropy	485-503
Ozturk, Murat / Bankir, Muzeyyen Balcikanli / Sevim, Umur Korkut	High‐temperature effect on mechanical properties of fiber reinforced concretes including waste tire rubber	1521-1530
Shu, Ji angpeng / Zhang, Congguang / Yu, Ke / Shooshtarian, Mohammed / Liang, Peng	IFC‐ based semantic modeling of damaged RC beams using 3D point clouds	389-410
Çalışkan, Özlem / Aras, Murat / Yilmaz, Tolga / Anil, Özgür / Erdem, R. Tuğrul	Impact behavior of low strength concrete slab strengthened with fan type anchored carbon fiber‐reinforced polymer strips	1689-1711
Najaf, Erfan / Abbasi, Hassan	Impact resistance and mechanical properties of fiber‐reinforced concrete using string and fibrillated polypropylene fibers in a hybrid form	1282-1295
Monney, Frédéric / Ruiz, Miguel Fernández / Muttoni, Aurelio	Influence of amount of shear reinforcement and its post‐yield response on the shear resistance of reinforced concrete members	1002-1034
Wang, Ruijun / Cao, Zhiliang / Li, Yang / Shi, Qi	The influence of fiber on salt frost resistance of hydraulic face slab concrete	521-535
Zhang, Xiaocun / Wang, Fenglai	Influence of parameter uncertainty on the low‐carbon design optimization of reinforced concrete continuous beams	855-871
Siwiński, Jarosław / Szcześniak, Anna / Rutkowska, Gabriela / Kubiak, Katarzyna / Stolarski, Adam	Integrated effects of concrete samples size and fibers amount on compressive strength of high‐ and ultra‐high strength concretes based on reactive powders	1402-1414
Du, Wenping / Yang, Caiqian / De Backer, Hans / Wang, Chong / Pan, Yong	Investigation of the flexural behavior of reinforced concrete beams strengthened with a composite reinforcement layer: Polyvinyl alcohol fiber‐reinforced ferrocement cementitious composite and steel wire mesh	1612-1626
Hejazi, Malihe / Jalaeefar, Ali	Investigation of the seismic resilience of reinforced concrete special moment frames with infills	1083-1101
Spinella, Nino / Messina, Davide	Load‐bearing capacity of Gerber saddles in existing bridge girders by different levels of numerical analysis	211-226
Haefliger, Severin / Kaufmann, Walter	Load‐deformation behavior of locally corroded reinforced concrete retaining wall segments: Experimental results	288-317
Bernard, Erik Stefan	Long‐term post‐crack performance of high‐strength fiber‐reinforced concrete for structural applications	1134-1151
Frontera, Alejandro / Cladera, Antoni	Long‐term shear strength of RC beams based on a mechanical model that considers reinforcing steel corrosion	25-40
Zhang, Fubin / Xie, Shaofeng / Xiao, Jianzhuang / Singh, Amardeep / Xu, Jing / Fang, Hai	Mechanical behavior of Glass fiber‐reinforced polymer ‐timber‐steel tube‐concrete composite columns under axial compression	1296-1312
Nguyen, Duy‐Liem / Thai, Duc‐Kien / Nguyen, H. T. Tai / Tran, Ngoc Thanh / Phan, Tan‐Duy / Kim, Dong joo	Mechanical behaviors and their correlations of ultra‐high‐performance fiber‐reinforced concretes with various steel fiber types	1179-1200
Kazemian, Maziar / Shafei, Behrouz	Mechanical properties of hybrid fiber‐reinforced concretes made with low dosages of synthetic fibers	1226-1243
Clarke, Todd / Ghiji, Matt / Fragomeni, Sam / Guerrieri, Maurice	Mechanical properties of macro synthetic fiber reinforced concrete at elevated temperatures: A systematic review and meta‐analysis	1244-1270
Trabucchi, Ivan / Tiberti, Giuseppe / Plizzari, Giovanni A.	A model for predicting the splitting bearing capacity of Fiber Reinforced Concrete elements under partially loaded areas	1271-1281
Mihaylov, Boyan I. / Franssen, Renaud	Modeling the behavior of shear‐dominated walls retrofitted with ultra high‐performance fiber‐reinforced concrete jackets	956-971
Raffoul, Samar / Escolano Margarit, David / Garcia, Reyes / Guadagnini, Maurizio / Pilakoutas, Kypros	A new cyclic model for FRP‐confined rubberized concrete	1627-1641
Lu, Pengzhen / Shi, Qingtian / Li, Dengguo / Wu, Ying	Optimization design on the section of curved composite box beam bridges	1035-1052
Matthews, Benjamin / Palermo, Alessandro / Scott, Allan	Overview of the cyclic response of reinforced concrete members subjected to artificial chloride‐induced corrosion	100-114
Erbaş, Yaşar / Anil, Özgür / Özdemir, Anıl / Kopraman, Yağmur	Prediction of capacity of reinforced concrete shear wall with multiple openings by using nonlinear finite element analysis	680-702
Sturm, Alexander B. / Visintin, Phillip	Pre‐ and post‐yield bond, tension‐stiffening, and cracking in ultra‐high performance fiber reinforced concrete	1201-1225
Zacchei, Enrico / Lyra, Pedro H. C.	Recalibration of low seismic excitations in Brazil through probabilistic and deterministic analyses: Application for shear buildings structures	937-955
Cheng, Yun‐Jian / Zheng, Wan‐Lan / Qiu, Wen‐Ge	Reconstruction of tunnel lining rebars from terrestrial laser scanning data	563-582
Chourasia, Ajay / Singhal, Shubham / Parashar, Jalaj / Chourasia, Akshat	Reinforced concrete beam‐columns anchored with headed bars subjected to reversed cyclic loading: Experimental and numerical investigation	840-854
Pelle, Angelo / Briseghella, Bruno / Fiorentino, Gabriele / Giaccu, Gian Felice / Lavorato, Davide / Quaranta, Giuseppe / Rasulo, Alessandro / Nuti, Camillo	Repair of reinforced concrete bridge columns subjected to chloride‐induced corrosion with ultra‐high performance fiber reinforced concrete	332-344
Wang, Jiehui / Ueda, Tamon	A review study on unmanned aerial vehicle and mobile robot technologies on damage inspection of reinforced concrete structures	536-562
Scalbi, Agnese / Zani, Giulio / di Prisco, Marco / Mannella, Paolo	The role of maintenance plans on serviceability and life extension of existing bridges	127-142
Zani, Giulio / Martinelli, Paolo / di Prisco, Marco	Role of the tensile constitutive modeling on the structural response of fiber reinforced concrete flat slabs: A numerical study	1313-1327
Cao, Qi / Ju, He / Jia, Jinqing / Zhang, Qiang / Zhang, Lihua	Seismic performance of reinforced concrete beam‐column joint made of post‐filling coarse aggregate concrete	1118-1133
De Domenico, Dario / Messina, Davide / Recupero, Antonino	Seismic vulnerability assessment of reinforced concrete bridge piers with corroded bars	56-83
Cao, Xia / He, Dabo / Qian, Kai / Fu, Feng / Deng, Xiao‐Fang / Wang, Lei	Shear behavior of glass FRP bars‐reinforced ultra‐high performance concrete I‐shaped beams	1503-1520
Franceschini, Lorenzo / Belletti, Beatrice / Tondolo, Francesco / Sánchez Montero, Javier	A simplified stress–strain relationship for the mechanical behavior of corroded prestressing strands: The SCPS-model	189-210
Peng, Yizhan / Wang, Zhao / Gong, Fuyuan / Zhao, Yuxi / Meng, Tao / Jin, Weiliang / Maekawa, Koichi	Spatial characteristics of stray current corrosion of reinforcing bars in pseudo concrete	374-388
Oettel, Vincent	Steel fiber reinforced RC beams in pure torsion—Load‐bearing behavior and modified space truss model	1348-1363
Al‐Osta, Mohammed A. / Kharma, Khaled M. / Ahmad, Shamsad / Maslehuddin, Mohammed / Al‐Huri, Mohammed / Khalid, Hammad	Strategies for strengthening of corroded reinforced concrete beams using CFRP laminates and UHPC jacketing	1546-1571
Coronelli, Dario / Mircea, Calin / Rogers, Rhys / Rosati, Gianpaolo / Consiglio, Andrea Nino	Structural assessment of prestressed beams with natural corrosion	41-55
Joyklad, Panuwat / Sirisonthi, Athasit / Chaiyasarn, Krisada / Hussain, Qudeer / Suparp, Suniti	Structural behavior of full‐scale precast posttensioned girder with substandard transverse reinforcement–experimental and analytical study	634-652
Yu, Shuo / Jin, Hao / Sun, Huajun / Cao, Miaofeng / Liu, Changbao	Study on rust layer distribution of cracked segment at tunnel arch waist under stray current and chloride ion corrosion	434-450
Zhao, Chenggong / Wang, Zhiyuan / Wu, Xinrui / Zeng, Xianshuai / Zhu, Zhenyu / Guo, Qiuyu / Zhao, Renda	Study on the flexural properties and fiber‐selection method of fiber‐reinforced geopolymer concrete	1364-1385
Qiu, Minghong / Shao, Xudong / Zhu, Yanping / Hussein, Husam H. / Liu, Yeping	Tensile and flexural tests on ultrahigh performance concrete grouted sleeve connection	703-720
Li, Jiayue / Deng, Zongcai	Tensile behavior of ultra‐high performance concrete reinforced with different hybrid fibers	1415-1435
Watts, Murray J. / Amin, Ali / Gilbert, Raymond Ian	Time‐dependent elongation and cracking behavior of fiber reinforced concrete tension chords	1436-1451
Michelini, Elena / Belletti, Beatrice / Franceschini, Lorenzo / Martinelli, Enzo	Time‐dependent seismic fragility curves for existing RC core‐wall buildings exposed to corrosion	170-188
Casprini, Elena / Passoni, Chiara / Marini, Alessandra / Bartoli, Gianni	Toward the definition of equivalent damage parameters for the assessment of corroded RC structures	11-24

Über diese
Datenseite
IssueID
69174
Veröffentlicht am:
21.03.2023
Geändert am:
21.03.2023

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Structural Concrete - v. 24, n. 1 (Februar 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structural Concrete - v. 24, n. 1 (Februar 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.