Structural Concrete - v. 21, n. 1 (Februar 2020)

Erschienen:	Februar 2020

Autor(en)	Titel	Seite(n)
Vafaei, Moahmmadreza / Alih, Sophia C. / Fallah, Ali	The accuracy of the lumped plasticity model for estimating nonlinear behavior of reinforced concrete frames under gradually increasing vertical loads	65-80
Olalusi, Oladimeji B. / Viljoen, Celeste	Assessment of reliability of EN 1992‐1‐1 variable strut inclination method of shear design provisions for stirrup failure	303-315
Prakash, Ramaiah / Thenmozhi, Rajagopal / Raman, Sudharshan N. / Subramanian, Chidambaram	Characterization of eco‐friendly steel fiber‐reinforced concrete containing waste coconut shell as coarse aggregates and fly ash as partial cement replacement	437-447
Mohammadi Mohaghegh, Ali / Silfwerbrand, Johan	Commentary article for shear behavior of high‐performance basalt fiber concrete – Part II: Laboratory punching shear tests on small slabs with macro fibers without bars	470-471
Domski, Jacek / Katzer, Jacek	Comprehensive approach to evaluation of mechanical properties of waste aggregate concrete reinforced by steel fiber	428-436
Biskinis, Dionysis / Fardis, Michael N.	Cyclic shear resistance for seismic design, based on monotonic shear models in fib Model Code 2010 and in the 2018 draft of Eurocode 2	129-150
Leibovich, Orit / Yankelevsky, David Z. / Dancygier, Avraham N.	The effect of local rebar geometry on global strain measurements in pull out tests	413-427
Kromoser, Benjamin / Kollegger, Johann	Efficient construction of concrete shells by Pneumatic Forming of Hardened Concrete: Construction of a concrete shell bridge in Austria by inflation	4-14
da Silva, Gisele C. S. / Christ, Roberto / Pacheco, Fernanda / de Souza, Camila F. N. / Gil, Augusto M. / Tutikian, Bernardo F.	Evaluating steel fiber‐reinforced self‐consolidating concrete performance	448-457
Klein Júnior, Odinir / Stucchi, Fernando R. / Barbosa, Ricardo L.	Evaluation of Brazilian standard ABNT NBR 6118 procedures for calculating the second-order effects of reinforced concrete slender columns subjected to uniaxial bending	81-93
Dashtian Gerami, Nasser / Khazraiyan, Najmeh	Evaluation of semi‐analytical model for rigid projectile penetration into concrete/metal targets	117-128
Valença, Jónatas / Carmo, Ricardo N. F.	Evaluation of the shear transfer mechanisms in reinforced concrete beams using photogrammetry	333-348
Huber, Patrick / Huber, Tobias / Kollegger, Johann	Experimental and theoretical study on the shear behavior of single‐ and multi‐span T‐ and I‐shaped post‐tensioned beams	393-408
Yang, Kejia / Dai, Tao / Li, Wei / Huang, Bin	Experimental investigation of seismic behavior of confined cavity walls retrofitted with reactive powder concrete overlays	184-198
Xue, Weichen / Yang, Xinlei / Hu, Xiang	Full‐scale tests of precast concrete beam‐column connections with composite T‐beams and cast‐in‐place columns subjected to cyclic loading	169-183
Dang‐Vu, Hoang / Lee, Do H. / Shin, Jiuk / Lee, Kihak	Influence of shear‐axial force interaction on the seismic performance of a piloti building subjected to the 2017 earthquake in Pohang Korea	220-234
Amoushahi Khouzani, Mohsen / Zeynalian, Mehran / Hashemi, Mahmoud / Mostofinejad, Davood / Farahbod, Farhang	Investigation of flexural and shear behaviors of biaxial voided slabs containing steel cages	291-302
Dhanapal, Jegatheeswaran / Jeyaprakash, Sridhar	Mechanical properties of mixed steel fiber reinforced concrete with the combination of micro and macro steel fibers	458-467
Olalusi, Oladimeji B. / Viljoen, Celeste	Model uncertainties and bias in SHEAR strength predictions of slender stirrup reinforced concrete beams	316-332
Torrenti, Jean Michel / Dehn, Frank	On the relation between the mean compressive strength and the characteristic one	409-412
Slobbe, Arthur / Rózsás, Árpád / Allaix, Diego L. / Bigaj-van Vliet, Agnieszka	On the value of a reliability-based nonlinear finite element analysis approach in the assessment of concrete structures	32-47
Gino, Diego / Castaldo, Paolo / Bertagnoli, Gabriele / Giordano, Luca / Mancini, Giuseppe	Partial factor methods for existing structures according to fib Bulletin 80: Assessment of an existing prestressed concrete bridge	15-31
Haider, Muhammad A. / Batikha, Mustafa / Elhag, Taha	Precast versus cast in‐situ concrete in the construction of post‐tensioned box‐girder bridges: Span effect	56-64
Nagavedu Jayakumar, Yogalakshmi / Kanchi, Balaji Rao	Probabilistic studies on mechanics‐based shear capacity models for reinforced concrete beams with stirrups	376-392
Nicácio, Wanderley G. / Barros, Joaquim A. O. / Melo, Guilherme S. S. A.	Punching behavior of BubbleDeck type reinforced concrete slabs	262-277
Augustin, Tomas / Fillo, Ludovit / Halvonik, Jaroslav	Punching resistance of slab‐column connections with openings	278-290
Schmidt, Philipp / Kueres, Dominik / Hegger, Josef	Punching shear behavior of reinforced concrete flat slabs with a varying amount of shear reinforcement	235-246
Barbán, Vladimir V. / Melo, Guilherme S. / Carvalho, Alessandra L.	Punching shear tests of post‐tensioned flat slabs supported on edge columns	247-261
Mahrenholtz, Christoph / Sharma, Akanshu	Qualification and design of anchor channels with channel bolts according to the new EN 1992‐4 and ACI 318	94-106
Hou, Lijun / Xu, Ran / Chen, Da / Xu, Shilang / Aslani, Farhad	Seismic behavior of reinforced engineered cementitious composite members and reinforced concrete/engineered cementitious composite members: A review	199-219
Liu, Jian / Mihaylov, Boyan	Shear strength of RC deep beams with web openings based on two‐parameter kinematic theory	349-361
Di Laora, Raffaele / Galasso, Carmine / Mylonakis, George / Cosenza, Edoardo	A simple method for N‐M interaction diagrams of circular reinforced concrete cross sections	48-55
Wang, Zhen / Wang, Jingquan / Zhu, Junzheng / Zhang, Jian	A simplified method to assess seismic behavior of reinforced concrete columns	151-168
Raju, Sumathy / Dharmar, Brindha	Studies on flexural behavior of reinforced concrete beams with copper slag and fly ash	107-116
Mihaylov, Boyan / Liu, Jian / Tvrznikova, Karolina	Two‐parameter kinematic approach for complete shear behavior of deep FRC beams	362-375

Autor(en)

Titel

Seite(n)

Vafaei, Moahmmadreza / Alih, Sophia C. / Fallah, Ali

The accuracy of the lumped plasticity model for estimating nonlinear behavior of reinforced concrete frames under gradually increasing vertical loads

65-80

Olalusi, Oladimeji B. / Viljoen, Celeste

Assessment of reliability of EN 1992‐1‐1 variable strut inclination method of shear design provisions for stirrup failure

303-315

Prakash, Ramaiah / Thenmozhi, Rajagopal / Raman, Sudharshan N. / Subramanian, Chidambaram

Characterization of eco‐friendly steel fiber‐reinforced concrete containing waste coconut shell as coarse aggregates and fly ash as partial cement replacement

437-447

Mohammadi Mohaghegh, Ali / Silfwerbrand, Johan

Commentary article for shear behavior of high‐performance basalt fiber concrete – Part II: Laboratory punching shear tests on small slabs with macro fibers without bars

470-471

Domski, Jacek / Katzer, Jacek

Comprehensive approach to evaluation of mechanical properties of waste aggregate concrete reinforced by steel fiber

428-436

Biskinis, Dionysis / Fardis, Michael N.

Cyclic shear resistance for seismic design, based on monotonic shear models in fib Model Code 2010 and in the 2018 draft of Eurocode 2

129-150

Leibovich, Orit / Yankelevsky, David Z. / Dancygier, Avraham N.

The effect of local rebar geometry on global strain measurements in pull out tests

413-427

Kromoser, Benjamin / Kollegger, Johann

Efficient construction of concrete shells by Pneumatic Forming of Hardened Concrete: Construction of a concrete shell bridge in Austria by inflation

4-14

da Silva, Gisele C. S. / Christ, Roberto / Pacheco, Fernanda / de Souza, Camila F. N. / Gil, Augusto M. / Tutikian, Bernardo F.

Evaluating steel fiber‐reinforced self‐consolidating concrete performance

448-457

Klein Júnior, Odinir / Stucchi, Fernando R. / Barbosa, Ricardo L.

Evaluation of Brazilian standard ABNT NBR 6118 procedures for calculating the second-order effects of reinforced concrete slender columns subjected to uniaxial bending

81-93

Dashtian Gerami, Nasser / Khazraiyan, Najmeh

Evaluation of semi‐analytical model for rigid projectile penetration into concrete/metal targets

117-128

Valença, Jónatas / Carmo, Ricardo N. F.

Evaluation of the shear transfer mechanisms in reinforced concrete beams using photogrammetry

333-348

Huber, Patrick / Huber, Tobias / Kollegger, Johann

Experimental and theoretical study on the shear behavior of single‐ and multi‐span T‐ and I‐shaped post‐tensioned beams

393-408

Yang, Kejia / Dai, Tao / Li, Wei / Huang, Bin

Experimental investigation of seismic behavior of confined cavity walls retrofitted with reactive powder concrete overlays

184-198

Xue, Weichen / Yang, Xinlei / Hu, Xiang

Full‐scale tests of precast concrete beam‐column connections with composite T‐beams and cast‐in‐place columns subjected to cyclic loading

169-183

Dang‐Vu, Hoang / Lee, Do H. / Shin, Jiuk / Lee, Kihak

Influence of shear‐axial force interaction on the seismic performance of a piloti building subjected to the 2017 earthquake in Pohang Korea

220-234

Amoushahi Khouzani, Mohsen / Zeynalian, Mehran / Hashemi, Mahmoud / Mostofinejad, Davood / Farahbod, Farhang

Investigation of flexural and shear behaviors of biaxial voided slabs containing steel cages

291-302

Dhanapal, Jegatheeswaran / Jeyaprakash, Sridhar

Mechanical properties of mixed steel fiber reinforced concrete with the combination of micro and macro steel fibers

458-467

Olalusi, Oladimeji B. / Viljoen, Celeste

Model uncertainties and bias in SHEAR strength predictions of slender stirrup reinforced concrete beams

316-332

Torrenti, Jean Michel / Dehn, Frank

On the relation between the mean compressive strength and the characteristic one

409-412

Slobbe, Arthur / Rózsás, Árpád / Allaix, Diego L. / Bigaj-van Vliet, Agnieszka

On the value of a reliability-based nonlinear finite element analysis approach in the assessment of concrete structures

32-47

Gino, Diego / Castaldo, Paolo / Bertagnoli, Gabriele / Giordano, Luca / Mancini, Giuseppe

Partial factor methods for existing structures according to fib Bulletin 80: Assessment of an existing prestressed concrete bridge

15-31

Haider, Muhammad A. / Batikha, Mustafa / Elhag, Taha

Precast versus cast in‐situ concrete in the construction of post‐tensioned box‐girder bridges: Span effect

56-64

Nagavedu Jayakumar, Yogalakshmi / Kanchi, Balaji Rao

Probabilistic studies on mechanics‐based shear capacity models for reinforced concrete beams with stirrups

376-392

Nicácio, Wanderley G. / Barros, Joaquim A. O. / Melo, Guilherme S. S. A.

Punching behavior of BubbleDeck type reinforced concrete slabs

262-277

Augustin, Tomas / Fillo, Ludovit / Halvonik, Jaroslav

Punching resistance of slab‐column connections with openings

278-290

Schmidt, Philipp / Kueres, Dominik / Hegger, Josef

Punching shear behavior of reinforced concrete flat slabs with a varying amount of shear reinforcement

235-246

Barbán, Vladimir V. / Melo, Guilherme S. / Carvalho, Alessandra L.

Punching shear tests of post‐tensioned flat slabs supported on edge columns

247-261

Mahrenholtz, Christoph / Sharma, Akanshu

Qualification and design of anchor channels with channel bolts according to the new EN 1992‐4 and ACI 318

94-106

Hou, Lijun / Xu, Ran / Chen, Da / Xu, Shilang / Aslani, Farhad

Seismic behavior of reinforced engineered cementitious composite members and reinforced concrete/engineered cementitious composite members: A review

199-219

Liu, Jian / Mihaylov, Boyan

Shear strength of RC deep beams with web openings based on two‐parameter kinematic theory

349-361

Di Laora, Raffaele / Galasso, Carmine / Mylonakis, George / Cosenza, Edoardo

A simple method for N‐M interaction diagrams of circular reinforced concrete cross sections

48-55

Wang, Zhen / Wang, Jingquan / Zhu, Junzheng / Zhang, Jian

A simplified method to assess seismic behavior of reinforced concrete columns

151-168

Raju, Sumathy / Dharmar, Brindha

Studies on flexural behavior of reinforced concrete beams with copper slag and fly ash

107-116

Mihaylov, Boyan / Liu, Jian / Tvrznikova, Karolina

Two‐parameter kinematic approach for complete shear behavior of deep FRC beams

362-375

Anzeige

Structural Concrete - v. 21, n. 1 (Februar 2020)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structural Concrete - v. 21, n. 1 (Februar 2020)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.