Structural Concrete - v. 20, n. 1 (Februar 2019)

Erschienen:	Februar 2019

Autor(en)	Titel	Seite(n)
Liu, Chao / Zhang, Yuxin / Yao, Yuan / Huang, Yuhao	Calculation method for flexural capacity of high strain-hardening ultra-high performance concrete T-beams	405-419
Saha, Ashish K.	A comparative study between ASTM C1567 and ASTM C227 to mitigate alkali-silica reaction	420-427
Lehký, David / Pan, Lixia / Novák, Drahomír / Cao, Maosen / Šomodíková, Martina / Slowik, Ondřej	A comparison of sensitivity analyses for selected prestressed concrete structures	38-51
Zeman, Oliver / Maierhofer, Florian / Schwenn, Michael / Bergmeister, Konrad	Concrete screws in contact with reinforcement	5-14
Weber, Michael / Thiele, Catherina	Correlation between compressive and tensile strength of old concretes: Applicability of the relationship described in EN 1992-1-1	483-492
Sarmiento, Patricia A. / Torres, Benjamín / Ruiz, Daniel M. / Alvarado, Yezid A. / Gasch, Isabel / Machuca, Andrés F.	Cyclic behavior of ultra-high performance fiber reinforced concrete beam-column joint	348-360
Xu, Li / Pan, Jinlong / Lu, Cong / Yin, Wanyun	Development mechanism of plastic hinge in reinforced engineered cementitious composite beams under monotonic loading	252-266
Kargari, Amirhossein / Eskandari-Naddaf, Hamid / Kazemi, Ramin	Effect of cement strength class on the generalization of Abrams' law	493-505
Khaliq, Wasim / Mujeeb, Abdul	Effect of processed pozzolans on residual mechanical properties and macrostructure of high-strength concrete at elevated temperatures	307-317
Li, Li / Cao, Mingli / Xie, Chaopeng / Yin, Hong	Effects of CaCO3 whisker, hybrid fiber content and size on uniaxial compressive behavior of cementitious composites	506-518
Facconi, Luca / Plizzari, Giovanni / Minelli, Fausto	Elevated slabs made of hybrid reinforced concrete: Proposal of a new design approach in flexure	52-67
Al-Fouadi, Wesam K. A. / Mohammed, Abbas H. / Abdullah, Kamaran	Experimental and analytical study on behavior of pull-out failure of reinforcing bar embedded in concrete blocks	171-184
Andisheh, Kaveh / Scott, Allan / Palermo, Alessandro	Experimental evaluation of the residual compression strength and ultimate strain of chloride corrosion-induced damaged concrete	296-306
Aslani, Farhad / Gedeon, Ronny	Experimental investigation into the properties of self-compacting rubberised concrete incorporating polypropylene and steel fibers	267-281
Lyu, Junli / Wang, Yong / Van Coile, Ruben / Huang, Zhaohui / Huang, Yuner	Experimental investigation on the fire resistance of cast-in-situ hollow core concrete slabs constructed using filler boxes and an assembly box system	144-163
Sun, Jian / Qiu, Hongxing / Jiang, Hongbo	Experimental study and associated mechanism analysis of horizontal bolted connections involved in a precast concrete shear wall system	282-295
Liu, Yangqing / Cai, Jianguo / Deng, Xiaowei / Cao, Yunfeng / Feng, Jian	Experimental study on effect of length of service hole on seismic behavior of exterior precast beam-column connections	85-96
Asadollahfardi, Gholamreza / Mahdavi, Amir R.	The feasibility of using treated industrial wastewater to produce concrete	123-132
Lai, Mianheng / Hanzic, Lucija / Ho, Johnny C. M.	Fillers to improve passing ability of concrete	185-197
Conforti, Antonio / Zerbino, Raul / Plizzari, Giovanni A.	Influence of steel, glass and polymer fibers on the cracking behavior of reinforced concrete beams under flexure	133-143
Sturm, Alexander B. / Visintin, Phillip	Local bond slip behavior of steel reinforcing bars embedded in ultra high performance fibre reinforced concrete	108-122
Polat, Rıza / Demirboğa, Ramazan / Karagöl, Fatma	Mechanical and physical behavior of cement paste and mortar incorporating nano-CaO	361-370
Pathak, Prabin / Zhang, Y. X.	Numerical study of structural behavior of fiber-reinforced polymer-strengthened reinforced concrete beams with bond-slip effect under cyclic loading	97-107
Ashish, Deepankar Kumar / Verma, Surender Kumar	An overview on mixture design of self-compacting concrete	371-395
Parisi, Fulvio / Scalvenzi, Martina / Brunesi, Emanuele	Performance limit states for progressive collapse analysis of reinforced concrete framed buildings	68-84
Al-Shugaa, Madyan A. / Rahman, Muhammad K. / Baluch, Mohammed H. / Al-Gadhib, Ali H. / Sadoon, Ahmed A. / Al-Osta, Mohammed A.	Performance of hollow concrete block masonry walls retrofitted with steel-fiber and microsilica admixed plaster	236-251
Yadav, Divyashree / Kwatra, Naveen / Agarwal, Pankaj	Post-yield deformation parameters of reinforced concrete beam with corroded reinforcement	318-329
Haddad, Rami H. / Ashteyat, Ahmed M. / Lababneh, Zainab K.	Producing geopolymer composites using oil shale ash	225-235
Šomodíková, Martina / Strauss, Alfred / Zambon, Ivan / Teplý, Bretislav	Quantification of parameters for modeling of chloride ion ingress into concrete	519-536
Hussien, Osama S.	Relation between slab thickness and dimensions of formwork	32-37
Isufi, Brisid / Ramos, António Pinho / Lúcio, Válter	Reversed horizontal cyclic loading tests of flat slab specimens with studs as shear reinforcement	330-347
Xue, Caihong / Li, Wengui / Li, Jianchun / Tam, Vivian W. Y. / Ye, Guang	A review study on encapsulation-based self-healing for cementitious materials	198-212
Arel, Hasan Şahan / Shaikh, Faiz U. A.	Semi-green cementitious materials from waste granite by considering the environmental, economic, and health impacts: A review	455-470
Huang, Hailin / Li, Jinhua / Zeng, Chuijun / Zhu, Mingqiao / Zhang, Mingliang	Simplified elastic design method using equivalent span ratio for two-way concrete composite slabs with precast ribbed panels	213-224
Grubeša, Ivanka N. / Radeka, Miroslava / Malešev, Mirjana / Radonjanin, Vlastimir / Gojević, Anita / Siddique, Rafat	Strength and microstructural analysis of concrete incorporating ash from sunflower seed shells combustion	396-404
Guler, Soner / Yavuz, Demet / Korkut, Fuat / Ashour, Ashraf	Strength prediction models for steel, synthetic, and hybrid fiber reinforced concretes	428-445
Oettel, Vincent / Empelmann, Martin	Structural behavior of profiled dry joints between precast ultra-high performance fiber reinforced concrete elements	446-454
Jiang, Dongqi / Tan, Kiang Hwee / Dai, Jian / Ong, Khim Chye Gary / Heng, Sonal	Structural performance evaluation of innovative prestressed concrete floating fuel storage tanks	15-31
Lv, Shenghua / Hu, Haoyan / Zhang, Jia / Lei, Ying / Sun, Li / Hou, Yonggang	Structure, performances, and formation mechanism of cement composites with large-scale regular microstructure by distributing uniformly few-layered graphene oxide in cement matrix	471-482
Bujnak, Jan / Mečár, Jakub / Bahleda, František	Tensile resistance of an anchor plate with supplementary reinforcement	164-170

Autor(en)

Titel

Seite(n)

Liu, Chao / Zhang, Yuxin / Yao, Yuan / Huang, Yuhao

Calculation method for flexural capacity of high strain-hardening ultra-high performance concrete T-beams

405-419

Saha, Ashish K.

A comparative study between ASTM C1567 and ASTM C227 to mitigate alkali-silica reaction

420-427

Lehký, David / Pan, Lixia / Novák, Drahomír / Cao, Maosen / Šomodíková, Martina / Slowik, Ondřej

A comparison of sensitivity analyses for selected prestressed concrete structures

38-51

Zeman, Oliver / Maierhofer, Florian / Schwenn, Michael / Bergmeister, Konrad

Concrete screws in contact with reinforcement

5-14

Weber, Michael / Thiele, Catherina

Correlation between compressive and tensile strength of old concretes: Applicability of the relationship described in EN 1992-1-1

483-492

Sarmiento, Patricia A. / Torres, Benjamín / Ruiz, Daniel M. / Alvarado, Yezid A. / Gasch, Isabel / Machuca, Andrés F.

Cyclic behavior of ultra-high performance fiber reinforced concrete beam-column joint

348-360

Xu, Li / Pan, Jinlong / Lu, Cong / Yin, Wanyun

Development mechanism of plastic hinge in reinforced engineered cementitious composite beams under monotonic loading

252-266

Kargari, Amirhossein / Eskandari-Naddaf, Hamid / Kazemi, Ramin

Effect of cement strength class on the generalization of Abrams' law

493-505

Khaliq, Wasim / Mujeeb, Abdul

Effect of processed pozzolans on residual mechanical properties and macrostructure of high-strength concrete at elevated temperatures

307-317

Li, Li / Cao, Mingli / Xie, Chaopeng / Yin, Hong

Effects of CaCO3 whisker, hybrid fiber content and size on uniaxial compressive behavior of cementitious composites

506-518

Facconi, Luca / Plizzari, Giovanni / Minelli, Fausto

Elevated slabs made of hybrid reinforced concrete: Proposal of a new design approach in flexure

52-67

Al-Fouadi, Wesam K. A. / Mohammed, Abbas H. / Abdullah, Kamaran

Experimental and analytical study on behavior of pull-out failure of reinforcing bar embedded in concrete blocks

171-184

Andisheh, Kaveh / Scott, Allan / Palermo, Alessandro

Experimental evaluation of the residual compression strength and ultimate strain of chloride corrosion-induced damaged concrete

296-306

Aslani, Farhad / Gedeon, Ronny

Experimental investigation into the properties of self-compacting rubberised concrete incorporating polypropylene and steel fibers

267-281

Lyu, Junli / Wang, Yong / Van Coile, Ruben / Huang, Zhaohui / Huang, Yuner

Experimental investigation on the fire resistance of cast-in-situ hollow core concrete slabs constructed using filler boxes and an assembly box system

144-163

Sun, Jian / Qiu, Hongxing / Jiang, Hongbo

Experimental study and associated mechanism analysis of horizontal bolted connections involved in a precast concrete shear wall system

282-295

Liu, Yangqing / Cai, Jianguo / Deng, Xiaowei / Cao, Yunfeng / Feng, Jian

Experimental study on effect of length of service hole on seismic behavior of exterior precast beam-column connections

85-96

Asadollahfardi, Gholamreza / Mahdavi, Amir R.

The feasibility of using treated industrial wastewater to produce concrete

123-132

Lai, Mianheng / Hanzic, Lucija / Ho, Johnny C. M.

Fillers to improve passing ability of concrete

185-197

Conforti, Antonio / Zerbino, Raul / Plizzari, Giovanni A.

Influence of steel, glass and polymer fibers on the cracking behavior of reinforced concrete beams under flexure

133-143

Sturm, Alexander B. / Visintin, Phillip

Local bond slip behavior of steel reinforcing bars embedded in ultra high performance fibre reinforced concrete

108-122

Polat, Rıza / Demirboğa, Ramazan / Karagöl, Fatma

Mechanical and physical behavior of cement paste and mortar incorporating nano-CaO

361-370

Pathak, Prabin / Zhang, Y. X.

Numerical study of structural behavior of fiber-reinforced polymer-strengthened reinforced concrete beams with bond-slip effect under cyclic loading

97-107

Ashish, Deepankar Kumar / Verma, Surender Kumar

An overview on mixture design of self-compacting concrete

371-395

Parisi, Fulvio / Scalvenzi, Martina / Brunesi, Emanuele

Performance limit states for progressive collapse analysis of reinforced concrete framed buildings

68-84

Al-Shugaa, Madyan A. / Rahman, Muhammad K. / Baluch, Mohammed H. / Al-Gadhib, Ali H. / Sadoon, Ahmed A. / Al-Osta, Mohammed A.

Performance of hollow concrete block masonry walls retrofitted with steel-fiber and microsilica admixed plaster

236-251

Yadav, Divyashree / Kwatra, Naveen / Agarwal, Pankaj

Post-yield deformation parameters of reinforced concrete beam with corroded reinforcement

318-329

Haddad, Rami H. / Ashteyat, Ahmed M. / Lababneh, Zainab K.

Producing geopolymer composites using oil shale ash

225-235

Šomodíková, Martina / Strauss, Alfred / Zambon, Ivan / Teplý, Bretislav

Quantification of parameters for modeling of chloride ion ingress into concrete

519-536

Hussien, Osama S.

Relation between slab thickness and dimensions of formwork

32-37

Isufi, Brisid / Ramos, António Pinho / Lúcio, Válter

Reversed horizontal cyclic loading tests of flat slab specimens with studs as shear reinforcement

330-347

Xue, Caihong / Li, Wengui / Li, Jianchun / Tam, Vivian W. Y. / Ye, Guang

A review study on encapsulation-based self-healing for cementitious materials

198-212

Arel, Hasan Şahan / Shaikh, Faiz U. A.

Semi-green cementitious materials from waste granite by considering the environmental, economic, and health impacts: A review

455-470

Huang, Hailin / Li, Jinhua / Zeng, Chuijun / Zhu, Mingqiao / Zhang, Mingliang

Simplified elastic design method using equivalent span ratio for two-way concrete composite slabs with precast ribbed panels

213-224

Grubeša, Ivanka N. / Radeka, Miroslava / Malešev, Mirjana / Radonjanin, Vlastimir / Gojević, Anita / Siddique, Rafat

Strength and microstructural analysis of concrete incorporating ash from sunflower seed shells combustion

396-404

Guler, Soner / Yavuz, Demet / Korkut, Fuat / Ashour, Ashraf

Strength prediction models for steel, synthetic, and hybrid fiber reinforced concretes

428-445

Oettel, Vincent / Empelmann, Martin

Structural behavior of profiled dry joints between precast ultra-high performance fiber reinforced concrete elements

446-454

Jiang, Dongqi / Tan, Kiang Hwee / Dai, Jian / Ong, Khim Chye Gary / Heng, Sonal

Structural performance evaluation of innovative prestressed concrete floating fuel storage tanks

15-31

Lv, Shenghua / Hu, Haoyan / Zhang, Jia / Lei, Ying / Sun, Li / Hou, Yonggang

Structure, performances, and formation mechanism of cement composites with large-scale regular microstructure by distributing uniformly few-layered graphene oxide in cement matrix

471-482

Bujnak, Jan / Mečár, Jakub / Bahleda, František

Tensile resistance of an anchor plate with supplementary reinforcement

164-170

Anzeige

Structural Concrete - v. 20, n. 1 (Februar 2019)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Structural Concrete - v. 20, n. 1 (Februar 2019)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.