Smart Materials and Structures - v. 13, n. 4 (August 2004)

Erschienen:	August 2004

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Song, G. / Qiao, P. / Sethi, V. / Prasad, A.	Active vibration control of a smart pultruded fiber-reinforced polymer I-beam	819-827
Singh, Amit / Pines, Darryll J. / Baz, Amr	Active/passive reduction of vibration of periodic one-dimensional structures using piezoelectric actuators	698-711
Agrawal, Brij N. / Chen, Hong-Jen	Algorithms for active vibration isolation on spacecraft using a Stewart platform	873-880
Karagülle, H. / Malgaca, L. / Öktem, H. F.	Analysis of active vibration control in smart structures by ANSYS	661-667
Ryu, D. H. / Wang, K. W.	Analysis of interfacial stresses and actuation authorities induced by surface-bonded piezoelectric actuators on curved flexible beams	753-761
Li, Fa-Xin / Fang, Dai-Ning / Soh, Ai-Kah	An analytical axisymmetric model for the poling-history dependent behavior of ferroelectric ceramics	668-675
Chrysochoidis, Nikolaos A. / Saravanos, Dimitris A.	Assessing the effects of delamination on the damped dynamic response of composite beams with piezoelectric actuators and sensors	733-742
Wereley, Norman M. / Lindler, Jason / Rosenfeld, Nicholas / Choi, Young-Tai	Biviscous damping behavior in electrorheological shock absorbers	743-752
Chehura, Edmon / Ye, Chen-Chun / Staines, Stephen E. / James, Stephen W. / Tatam, Ralph P.	Characterization of the response of fibre Bragg gratings fabricated in stress and geometrically induced high birefringence fibres to temperature and transverse load	888-895
Jha, Ratneshwar / He, Chengli	A comparative study of neural and conventional adaptive predictive controllers for vibration suppression	811-818
Ikeda, Tadashige / Nae, Florin Andrei / Naito, Hisashi / Matsuzaki, Yuji	Constitutive model of shape memory alloys for unidirectional loading considering inner hysteresis loops	916-925
Elahinia, Mohammad H. / Ahmadian, Mehdi / Ashrafiuon, Hashem	Design of a Kalman filter for rotary shape memory alloy actuators	691-697
Tua, P. S. / Quek, S. T. / Wang, Q.	Detection of cracks in plates using piezo-actuated Lamb waves	643-660
Purekar, A. S. / Pines, D. J. / Sundararaman, S. / Adams, D. E.	Directional piezoelectric phased array filters for detecting damage in isotropic plates	838-850
Zhang, J. X. / Sato, M. / Ishida, A.	The effect of two types of precipitates upon the structure of martensite in sputter-deposited Ti–Ni thin films	N37-N42
Lynch, Jerome Peter / Sundararajan, Arvind / Law, Kincho H. / Kiremidjian, Anne S. / Carryer, Ed	Embedding damage detection algorithms in a wireless sensing unit for operational power efficiency	800-810
Ip, K. H. / Tse, Peter W. / Tam, H. Y.	Extraction of patch-induced Lamb waves using a wavelet transform	861-872
Zheng, Shijie / Wang, Xinwei / Chen, Wanji	The formulation of a refined hybrid enhanced assumed strain solid shell element and its application to model smart structures containing distributed piezoelectric sensors/actuators	N43-N50
Lin, Yung Bin / Chang, Kuo Chun / Chern, Jenn Chuan / Wang, Lon A.	The health monitoring of a prestressed concrete beam by using fiber Bragg grating sensors	712-718
Suresh, S. / Omkar, S. N. / Ganguli, Ranjan / Mani, V.	Identification of crack location and depth in a cantilever beam using a modular neural network approach	907-915
Tsuda, Hiroshi / Toyama, Nobuyuki / Urabe, Kei / Takatsubo, Junji	Impact damage detection in CFRP using fiber Bragg gratings	719-724
Ukita, Hiroo / Tanabe, Yuichiro / Okada, Atsushi	Improved photothermal deflection design of an integrated microbeam for application to an external-cavity tunable laser diode	970-975
Garcia, Ephrahim / Lobontiu, Nicolae	Induced-strain multimorphs for microscale sensory actuation design	725-732
Tobushi, H. / Matsui, R. / Hayashi, S. / Shimada, D.	The influence of shape-holding conditions on shape recovery of polyurethane-shape memory polymer foams	881-887
Nguyen, Cu-Hai / Pietrzko, Stanislaw / Buetikofer, Rudolf	The influence of temperature and bonding thickness on the actuation of a cantilever beam by PZT patches	851-860
Su, Zhongqing / Ye, Lin	An intelligent signal processing and pattern recognition technique for defect identification using an active sensor network	957-969
Aboudi, Jacob	Micromechanically based constitutive equations for shape-memory fiber composites undergoing large deformations	828-837
Chu, Xiangcheng / Qiu, Hongyun / Li, Longtu / Gui, Zhilun	Multi-DOF and sub-micrometer piezoelectric-electrorheological stepper motor	N51-N56
Hau, L. C. / Fung, E. H. K.	Multi-objective optimization of an active constrained layer damping treatment for shape control of flexible beams	896-906
Hafiz, H. R.	New photosensitive ultrathin films fabricated by the Langmuir–Blodgett technique	N68-N71
Costa Branco, P. J. / Dente, J. A.	On the electromechanics of a piezoelectric transducer using a bimorph cantilever undergoing asymmetric sensing and actuation	631-642
Kobayashi, M. / Jen, C.-K.	Piezoelectric thick bismuth titanate/lead zirconate titanate composite film transducers for smart NDE of metals	951-956
Ma, N. / Song, G. / Lee, H.-J.	Position control of shape memory alloy actuators with internal electrical resistance feedback using neural networks	777-783
Ganapathi, M. / Patel, B. P. / Touratier, M.	Refined finite element for piezoelectric laminated composite beams	N57-N67
Yu, Wenbin / Hodges, Dewey H.	A simple thermopiezoelastic model for smart composite plates with accurate stress recovery	926-938
Raja, S. / Sinha, P. K. / Prathap, G. / Dwarakanathan, D.	Thermally induced vibration control of composite plates and shells with piezoelectric active damping	939-950
Hou, Peng-Fei / Leung, Andrew Y. T.	The transient responses of magneto-electro-elastic hollow cylinders	762-776
Chen, Rong-Liang / Wang, Bor-Tsuen	The use of polyvinylidene fluoride films as sensors for the experimental modal analysis of structures	791-799
Lin, Yung Bin / Chern, Jenn Chuan / Chang, Kuo-Chun / Chan, Yin-Wen / Wang, Lon A.	The utilization of fiber Bragg grating sensors to monitor high performance concrete at elevated temperature	784-790
Mitra, Mira / Gopalakrishnan, S. / Bhat, M. Seetharama	Vibration control in a composite box beam with piezoelectric actuators	676-690

Über diese
Datenseite
IssueID
21373
Veröffentlicht am:
04.12.2018
Geändert am:
03.08.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Smart Materials and Structures - v. 13, n. 4 (August 2004)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Smart Materials and Structures - v. 13, n. 4 (August 2004)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.