Procedia Structural Integrity - 2020

Erschienen:	2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Bertolin, Chiara / de Ferri, Lavinia / Razavi, Javad / Berto, Filippo	Acoustic Emission NDT for monitoring hygro-mechanical reactions of coated pine wood: a methodological approach	208-217
Al-Mukhtar, A. M.	Aircraft Fuselage Cracking and Simulation	124-131
Soupramanien, C. / Sivaprasad, S. / Prakash, Raghu V.	Analysis of crack-tip constraint due to V- and U- side grooves in C(T) specimens	1733-1744
Petrova, Vera / Schmauder, Siegfried	Analysis of interacting cracks in functionally graded thermal barrier coatings	608-618
Singh, Anurag / Shamchi, Sahand P. / Sguazzo, Carmen / Yi, Xiaosu / Zhao, Z. / Moreira, Pedro M. G. P.	Analysis of Mechanical Behavior of Multi-functional CFRP under Bending and DCB Mode-I Fracture	2206-2217
Shardakov, I. / Glot, I. / Shestakov, A. / Tsvetkov, R. / Yepin, V. / Gusev, G.	Analysis of Quasistatic Deformation of Reinforced Concrete Structure on the Basis of Acoustic Emission on the Results of Vibration Diagnostics and Acoustic Emission	1407-1415
Dolgov, Nikolay / Dikova, Tsanka	Analytical approach for stress analysis in tensile test of ceramic coating on Co-Cr dental alloy substrate	1010-1017
Sánchez-Arce, I. J. / Ramalho, L. D. C. / Campilho, R. D. S. G. / Belinha, J.	Analyzing single-lap joints bonded with a brittle adhesive by an elastic meshless method	1084-1093
Toribio, Jesús	Anisotropy of hydrogen embrittlement in cold drawn pearlitic steel: A tribute to Mantegna	2438-2443
Clerc, G. / Brunner, Andreas J. / Niemz, Peter / Van de Kuilen, Jan-Willem	Application of fracture mechanics to engineering design of complex structures	1761-1767
Loghin, Adrian / Ismonov, Shakhrukh	Application of Response Surface Method in Probabilistic Fatigue Crack Propagation Life Assessment using 3D FEA	2304-2311
Kostina, A. / Zhelnin, M. / Plekhov, O.	Application of Rock Damage Model to Thermal Oil Recovery	675-683
Arroyo, B. / Andrea, L. / González, P. / Alvarez, J. A. / Cicero, S. / Lacalle, R. / Fernandez, A.	Application of the incremental step loading technique to Small Punch Tests on S420 steel in acid environments	180-187
Suknev, S. V.	Application of the Theory of Critical Distances to quasi-brittle fracture with a developed process zone	903-909
González, P. / Cicero, S. / Peron, M. / Arroyo, B. / Alvarez, J. A. / Berto, F.	Application of the Theory of the Critical Distances based methodology for the analysis of Environmentally Assisted Cracking processes in biomaterials	45-52
Stepanova, L. V. / Zhabbarov, R. M.	Approximate Solutions to Nonlinear Problems of Solid Mechanics by Quasilinearization Method	2277-2282
Makhutov, NikolayA. / Gadenin, Mikhail. M. / Reznikov, DmitryO.	Assessment and accounting for extreme impacts for validation of strength and service life of highly loaded machines and structures	1378-1391
Stochino, Flavio / Valdes, Monica / Mistretta, Fausto / Sassu, Mauro	Assessment of lightweight concrete properties under cryogenic temperatures: influence on the modulus of elasticity	1467-1472
Stepanova, L. V. / Zhabbarov, R. M.	Asymptotic crack-tip fields in perfect plasticity under mixed mode loading	1781-1786
Meneghetti, Giovanni / Campagnolo, Alberto / Pullin, Elena / Masaggia, Stefano	Austempered ductile iron-to-steel dissimilar arc-welded joints: fatigue strength assessment according to local approaches	1481-1502
Meneghetti, Giovanni / Campagnolo, Alberto / Visentin, Alberto	Automated fatigue strength assessment of arc-welded structures according to the Peak Stress Method	1062-1083
Stergiou, Theodosios / Baxevanakis, Konstantinos P. / Roy, Anish / Sazhenkov, Nickolay / Nikhamkin, Mikhail A. / Silberschmidt, Vadim V.	Ballistic performance of polyurea-coated thin aluminium plates: numerical study	1258-1266
Abdalla, Jamal A. / Mirghani, Ahmed / Hawileh, Rami A.	Bond stress and behavior of interface between untreated aluminum alloy surface and concrete	1295-1302
Ferreira, C. L. / Campilho, R. D. S. G. / Moreira, R. D. F.	Bonded structures improvement by the dual adhesive technique	1116-1124
Hredil, Myroslava / Krechkovska, Halyna / Student, Oleksandra / Tsyrulnyk, Oleksandr	Brittle fracture manifestation in gas pipeline steels after long-term operation	1204-1211
Anastopoulos, Stylianos / Givannaki, Faidra / Papanikos, Paraskevas / Metaxa, Zoi / Alexopoulos, Nikolaos D.	Calculation of a composite material’s modulus of elasticity: comparison of results using fixed angles orientation and RVE with those using random orientation tensor and multi-step homogenization	2132-2141
Chaves, Victor	Calculation of fatigue limits in notches with a micro-mechanical model in a simple way	323-329
Mikhailova, N. V. / Petrov, Yu. V.	Calculation of fracture location in multiple spalling	2026-2031
Depraetere, Robin / Cauwels, Margo / De Waele, Wim / Depover, Tom / Verbeken, Kim / Hertelé, Stijn	Calibrating a ductile damage model for two pipeline steels: method and challenges	2267-2276
Williams, B. W. / McKinley, J. / Xu, S. / Xue, J. / Spiess, M.	Capturing Variability in the Fracture Response of TC128B Steel using Damage Mechanics	1024-1038
Wang, Bingquan / Oterkus, Selda / Oterkus, Erkan	Closed-form dispersion relationships in bond-based peridynamics	482-490
Ma, Dayou / Elmahdy, Ahmed / Verleysen, Patricia / Giglio, Marco / Manes, Andrea	A cohesive-based method to bridge the strain rate effect and defects of RTM-6 epoxy resin under tensile loading	1193-1203
Versteylen, Casper / Uitslag-Doolaard, Heleen / Stefanini, Lorenzo / Blom, Frederic	A combined CFD and FEM analysis of pressurized thermal shock applied to the probabilistics of cleavage fracture	1918-1929
Milovanović, Aleksa / Sedmak, Aleksandar / Grbović, Aleksandar / Golubović, Zorana / Mladenovic, Goran / Čolić, Katarina / Milošević, Miloš	Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material	1963-1968
Oshmarin, D. A. / Iurlova, N. A. / Sevodina, N. V. / Iurlov, M. A.	A comparative analysis of two approaches to damping of vibrations	1438-1448
Mega, Mor / Banks-Sills, Leslie	Comparison of methods for determination of fracture toughness in a multi-directional CFRP laminate	917-924
Jones, Michael / Hole, Matthew / Davies, Catrin Mair	A comparison of stress triaxiality and strain distributions in notched bar geometries as determined by Bridgman expressions and finite element analysis	2078-2085
Marcalikova, Zuzana / Racek, Miroslav / Mateckova, Pavlina / Cajka, Radim	Comparison of tensile strength fiber reinforced concrete with different types of fibers	950-956
Akçay, Fuzuli Ağrı / Wu, Dazhong / Bai, Yuanli	Comprehensive Studies on Strength of 3D-printed Aluminum Micro Lattice Structures	1399-1406
Boljanovic, Slobodanka / Carpinteri, Andrea	Computational analysis of a surface corner crack under cyclic loading	2370-2377
Fedulov, Boris N. / Fedorenko, Alexey N. / Jurgenson, Sergey A. / Kantor, Mark M. / Lomakin, Evgeny V.	Construction plate enforced by metamaterial elements	155-161
Menshykov, Oleksandr / Menshykova, Marina / Guz, Igor	Contact problems for cracks under impact loading	1621-1628
Georgoulis, Dimitris / Charalampidou, Christina M. / Siskou, Nikoleta / Alexopoulos, Nikolaos D. / Kourkoulis, Stavros K.	Corrosion behaviour of AA2198–T8 and AA2024-T3 alloy in 3.5% aqueous solution	2297-2303
Filin, V. Yu. / Ilyin, A. V. / Mizetsky, A. V.	Crack arrest simulation in steel in account of competing ductile and cleavage fracture	3-10
Wiehler, Levke / Bär, Jürgen	Crack Detection and Localization with Multiple Potential Drop Measurements	925-932
Ammendolea, Domenico / Greco, Fabrizio / Lonetti, Paolo / Nevone Blasi, Paolo / Pascuzzo, Arturo	Crack growth propagation modeling based on moving mesh method and interaction integral approach	1981-1991
Aranđelović, M. / Sedmak, S. A. / Milović, Lj. / Maksimović, A. / Božić, Ž.	Crack propagation in 3PB specimen made from welded joint	440-445
Zamzami, I. Al / Razavi, S. M. J. / Berto, F. / Susmel, L.	The Critical Distance Method to estimate the fatigue strength of notched additively manufactured titanium alloys	994-1001
Otsuka, Yuichi / Sugawara, Hiraku / Miyashita, Yukio	Damage evaluations in Supporting Porous Components using Infrared Thermography and Acoustic Emission and their Effects on Loosening Behaviour of Acetabular Cup	1018-1023
Moetazedian, Amirpasha / Gleadall, Andrew / Mele, Elisa / Silberschmidt, Vadim V.	Damage in extrusion additive manufactured parts: effect of environment and cyclic loading	452-457
Kotzem, Daniel / Ohlmeyer, Hendrik / Walther, Frank	Damage tolerance evaluation of a unit cell plane based on electron beam powder bed fusion (E-PBF) manufactured Ti6Al4V alloy	11-18
Igumnov, L. A. / Volkov, I. A.	Defining relations of mechanics of damaged media effected by fatigue and creep	2086-2098
Atroshenko, S. A. / Grigor’ev, A.Yu. / Savenkov, G. G.	Deformation and fracture of a titanium alloy during penetration of high-speed impactor to the target	101-105
Bragov, A. M. / Konstantinov, A.Yu. / Lamzin, D. A. / Lomunov, A. K. / Gonov, M. E.	Determination of the mechanical properties of concrete using the split Hopkinson pressure bar method	2174-2180
Weiß, D. / Schramm, B. / Kullmer, G.	Development of a special specimen geometry for the experimental determination of fracture mechanical parameters of clinchable metal sheets	2335-2341
Turco, Chiara / Funari, Marco Francesco / Spadea, Saverio / Ciantia, Matteo / Lourenço, Paulo B.	A digital tool based on Genetic Algorithms and Limit Analysis for the seismic assessment of historic masonry buildings	1511-1519
Andrade, Pedro / Santos, José / Escórcio, Patrícia	Direct Integration Methods versus Modal Superposition Method, on Predicting Staircases Vibrations	279-286
Selyutina, N.	Dynamic deformation of fiber-metal laminates depending on its metal thickness	1310-1314
Uenishi, Koji / Fukuda, Yuki / Nagasawa, Kunihiro	Dynamic fracture development in a multiply cracked solid	2072-2077
Kazarinov, Nikita / Petrov, Yuri / Smirnov, Alexander	Dynamic fracture effects observed in discrete mechanical systems	2168-2173
Okeke, C. P. / Thite, A. N. / Greenrod, M. T. / Durodola, J. F. / C Lane, R.	Dynamic response characteristics of an automotive lamp assembly	1941-1949
Cadoni, Ezio / Dotta, Matteo / Forni, Daniele / Riganti, Gianmario	Dynamic response of UHPFRCs in direct-shear tests	933-942
Lutsenko, H. / Vaysfeld, N.	Dynamic thermoelasticity problem for a finite hollow cylinder with a cut along the generatrix	770-775
Mysov, K. / Vaysfeld, N.	The dynamical stress concentration near a spherical crack in a twice-truncated elastic cone	352-357
de Jesus, J. / Borrego, L. P. / Vilhena, L. / Ferreira, J. A. M. / Ramalho, A. / Capela, C.	Effect of artificial saliva on the fatigue and wear response of TiAl6V4 specimens produced by SLM	790-795
Vălean, Cristina / Marsavina, Liviu / Mărghitaș, Mihai / Linul, Emanoil / Razavi, Javad / Berto, Filippo / Brighenti, Roberto	The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness	1134-1139
Kesba, Mohamed Khodjet / Benkhedda, A. / Bedia, E. A. Adda / Boukert, B.	Effect of high temperature on the stiffness properties of cracked composite laminates with different off-axis angles	864-872
Oterkus, Selda / Wang, Bingquan / Oterkus, Erkan	Effect of horizon shape in peridynamics	418-429
Evstifeev, A. D. / Volkov, G. A.	Effect of Mg on Dynamic Properties of Al-Mg Alloys	2261-2266
Rayhan, Saiaf Bin / Rahman, Md Mazedur	Effect of micromechanical properties on the critical buckling load of woven composite plate: A multiscale analysis	1901-1908
Botvina, L. R. / Tyutin, M. R. / Sinev, I. O. / Bolotnikov, A. I.	The effect of preliminary cyclic loading on acoustic emission parameters and damage of structural steels	2118-2125
Luca, Romanin / Paolo, Ferro / Filippo, Berto	Effect of Seismic Load on Welded Structures Deformation	162-170
Smirnov, Sergey / Veretennikova, Irina / Vichuzhanin, Dmitry / Pestov, Aleksander / Smirnova, Evgenya	The Effect of Stress State on the Adhesive Strength of a Glued Sandwich in Shear-Compression Testing	234-238
Douier, Kais / Hawileh, Rami A. / Abdalla, Jamal A.	Effect of U-wrap anchors on the strength and ductility of externally bonded RC beams with mortar bonded GSM sheets	986-993
Igusheva, Liudmila / Petrov, Yuri	Effects of dynamic deformation and fracture in the Klein – Gordon stress field	1303-1309
Khosravani, Mohammad Reza / Reinicke, Tamara	Effects of raster layup and printing speed on strength of 3D-printed structural components	720-725
Makhutov, NikolayA. / Reznikov, Dmitry O.	Effects of stress concentration and occurrence of limit states under high speed loading in low temperature operating conditions	1347-1359
Maruccio, Claudio / Kefal, Adnan	Electromechanical contact elements for modelling adhesion and interfacial interactions in electrospun nanofibers systems	2142-2147
Namdar, Abdoullah	The embankment-subsoil subjected to multidirectional seismic loading simultaneously-prediction of strain mechanism	301-310
Perelmuter, Mikhail	Energy characteristics of interfacial bridged cracks	2320-2327
Maurizi, Marco / Edwards, Bryce / Greer, Julia / Berto, Filippo	Energy-based approach for failure assessment of 3D architectured materials	2181-2186
Moreira, R. / Anes, V. / Freitas, M. / Reis, L.	Evaluation and numerical modeling of phenomenological approach for AZ31B-F magnesium alloy under multiaxial fatigue	943-949
De Waele, Wim / Trogh, Sven / Tender, Steven De / Micone, Nahuel / Hectors, Kris	Evaluation of fatigue crack propagation in steel ESET specimens subjected to variable load spectra	253-265
Raghavendra, S. / Molinari, A. / Fontanari, V. / Zappini, G. / Benedetti, M.	Evaluation of Static and Fatigue Properties of Regular Lattice and Trabecular Cellular Structures	517-524
Sadeghi, M. Z. / Weiland, J. / Zimmermann, J. / Schiebahn, A. / Reisgen, U. / Schröder, K. U.	Experimental and FE investigations on the influential parameters in positioning and measurement of strain gauges in adhesively bonded single lap joints	1590-1600
Barjaktarević, Dragana / Medjo, Bojan / Gubeljak, Nenad / Cvijović-Alagić, Ivana / Štefane, Primož / Djokic, Veljko / Rakin, Marko	Experimental and numerical analysis of tensile properties of Ti-13Nb-13Zr alloy and determination of influence of anodization process	2187-2194
Risitano, Giacomo / Santonocito, Dario	Experimental and numerical assessment of the end of the thermoelastic effect during static traction test	1449-1457
Saoud, A. / Elamri, A. / Kimakh, K.	Experimental approach for the study of wood strength at fracture in mode II by using a modified prototype test specimen and confrontation of the results with those of the 4ENF test. Application: Eucalyptus Grandis	491-501
Henschel, S. / Posselt, F. / Dudczig, S. / Wetzig, T. / Aneziris, C. G. / Krüger, L.	Experimental determination of toughness under mode I/II loading	1369-1377
Zhabbarov, R. M. / Stepanova, L. V.	Experimental evaluation of coefficients of multi-parameter asymptotic expansion of the crack-tip stress field using digital photoelasticity	1774-1780
Chiocca, A. / Frendo, F. / Bertini, L.	Experimental evaluation of relaxed strains in a pipe-to-plate welded joint by means of incremental cutting process	2157-2167
Vshivkov, A. / Iziumova, A. / Plekhov, O.	Experimental investigation of fatigue crack induced energy dissipation under mixed mode loading	1839-1845
Prokhorov, A. / Zhelnin, M. / Kostina, A. / Plekhov, O.	Experimental investigation of physical and mechanical properties of processes accompanied with phase transition in water-saturated soil	1579-1589
Belyaev, Fedor S. / Evard, Margarita E. / Ostropiko, Eugeny S. / Volkov, Aleksandr E.	Experimental Study and Modeling of the Fatigue Fracture of High-Strength FeMnSi-based Shape Memory Alloy	2110-2117
Shardakov, I. / Glot, I. / Shestakov, A. / Tsvetkov, R.	Experimental Study of Dynamic Deformation Processes in Gas Pipeline	1795-1801
Vučetić, Filip / Čolić, Katarina / Grbović, Aleksandar / Radakovic, Zoran / Sedmak, Simon	Extended FEM analysis of fatigue crack growth in Ti-6Al-4V orthopaedic plates	555-560
Gómez, F. J. / Cicero, S. / Torabi, A. R.	An extension of the Equivalent Material Concept applied to fracture of U-notched solids	752-763
Iordachescu, Mihaela / Valiente, Andrés / de Abreu, Maricely / Aznar, Antonio	Failure cause of bridge tie-down cables after 30 years of service	39-44
Baykan, Buşra M. / Yolum, Uğur / Özaslan, Emre / Güler, Mehmet A. / Yıldırım, Bora	Failure Prediction of Composite Open Hole Tensile Test Specimens Using Bond Based Peridynamic Theory	2055-2064
Toribio, Jesús	Fatigue & fracture crack paths generated by manufacturing-induced microstructural & strength anisotropy in cold drawn pearlitic steels: (a) In the conceptual framework of Maurits Cornelis Escher and Johann Sebastian Bach; (b) An Orteguian approach as well	2410-2415
Toribio, Jesús / González, Beatriz / Matos, Juan-Carlos	Fatigue and fracture crack paths in spheroidized steel	2378-2381
Souto, C. D. S. / Gomes, V. M. G. / Figueiredo, M. / Correia, J. A. F. O. / Lesiuk, G. / Fernandes, A. A. / de Jesus, A. M. P.	Fatigue behavior of cold roll-formed rail profiles for rack structures	139-145
da Silva, Lucas F. R. C. / Gomes, Vitor M. G. / de Jesus, Abilio M. P. / Figueiredo, M. / Correia, José A. F. O. / Lesiuk, G. / Fernandes, António A.	Fatigue behaviour of bolted joints for rack structures	1426-1430
Samadian, Kaveh / De Waele, Wim	Fatigue Crack Growth Model Incorporating Surface Waviness For Wire+Arc Additively Manufactured Components	1846-1855
Li, Yifan / Pavier, Martyn J. / Coules, Harry	Fatigue properties of aluminium triangular lattice plates	1148-1159
Atzori, Bruno / Ricotta, Mauro / Campagnolo, Alberto / Rigon, Daniele / Meneghetti, Giovanni	Fatigue Strength Evaluation of Notched Ductile Steel Specimens Using Critical Distances	1329-1339
Sudin, V. V. / Kantor, M. M. / Solntsev, K. A.	Features of weld metal brittle fracture in Charpy tests	1637-1643
Hemer, Abubkr M. / Sedmak, Simon A. / Milovic, Ljubica / Grbović, Aleksandar / Sedmak, Aleksandar	FEM simulation of welded joint geometry influence on fatigue crack growth resistance	1827-1832
Brunner, Andreas J. / Schwiedrzik, Johann J. / Mohanty, Gaurav / Michler, Johann	Fiber push-in failure in carbon fiber epoxy composites	538-545
Xue, J. / Williams, B. / Xu, S. / Tyson, W. R.	Finite Element Analysis to Investigate the Effect of Loading Modes on the CTOA of DWTT Specimens	1047-1054
Raheem, Hassan Mansour / Aljanabi, Mohanad	Finite Element Modeling of the Functional Spinal Unit under Compression Loads	1755-1760
Leoni, F. / Grong, Ø. / Fjær, H. G. / Ferro, P. / Berto, F.	A First Approach on Modelling the Thermal and Microstructure Fields During Aluminium Butt Welding Using the HYB PinPoint Extruder	2253-2260
Solfiti, E. / Calviani, M. / Perillo-Marcone, A. / Heredia, J. M. / Torregrosa, C. / Alvaro, A. / Berto, F.	Flexible graphite as beam dumping material in the TDE blocks of the Large Hadron Collider	2228-2234
Abdalla, Jamal A. / Mohammed, Abubakr / Hawileh, Rami A.	Flexural Strengthening of Reinforced Concrete Beams with Externally Bonded Hybrid Systems	2312-2319
Hamza, Chbani / Bouchra, Saadouki / Mostapha, Boudlal / Mohamed, Barakat	Formulation of Ordinary Concrete using the Dreux-Gorisse Method	430-439
Bose, Shirsha / Li, Simin / Mele, Elisa / Silberschmidt, Vadim V.	Fracture Behaviour of Collagen: Effect of Environment	843-849
Brunner, Andreas J.	Fracture mechanics test standards for fiber-reinforced polymer composites: Suggestions for adapting them to Industry 4.0 and the digital age	546-554
Cicero, S. / Lambrecht, M. / Swan, H. / Arffman, P. / Altstadt, E. / Petit, T. / Obermeier, F. / Arroyo, B. / Alvarez, J. A. / Lacalle, R.	Fracture mechanics testing of irradiated RPV steels by means of sub-sized specimens: FRACTESUS project	61-66
Allum, James / Gleadall, Andrew / Silberschmidt, Vadim V.	Fracture of 3D-printed micro-tensile specimens: filament-scale geometry-induced anisotropy	591-601
Conrad, F. / Blug, A. / Kerl, J. / Fehrenbach, J. / Regina, D. J. / Bertz, A. / Kontermann, C. / Carl, D. / Oechsner, M.	GPU-based digital image correlation system for uniaxial and biaxial crack growth investigations	2195-2205
Cicero, S. / Parra, J. L. / Arroyo, B. / Procopio, I.	Graphene oxide does not seem to improve the fracture properties of injection molded PA6	67-73
Fedorenko, Alexey N. / Fedulov, Boris N. / Lomakin, Evgeny V.	High rate damage of composite material for modelling of energy absorbing structures	804-810
Cadoni, Ezio / Dotta, Matteo / Forni, Daniele	High strain-rate behaviour of a Tungsten alloy	964-970
Kats, Victor / Morozov, Viktor	High-rated loading, deformation and fracture of thick-walled composite cylinders with an electric explosion of wires	602-607
Balandin, V. V. / Balandin, VI.VI. / Bragov, A. M. / Konstantinov, A.Yu. / Kuznetsov, A. V. / Savenkov, G. G.	High-speed Deformation and Failure of Titan Alloy	1802-1807
Sparrer, Yannik / Könemann, Markus / Münstermann, Sebastian	Hybrid Approach to Describe and Understand the Influence of Inclusions on the Transition Behavior of X65 Pipeline Steel	2126-2131
Santos, P. / Valvez, S. / Monjon, A. / Reis, P. N. B.	The hybridisation effect on the viscoelastic properties of polymeric composites	1816-1826
Silva, M. P. / Santos, P. / Parente, J. M. / Valvez, S. / Reis, P. N. B.	Hybridization effect on the impact properties of flax composites	2235-2244
Toribio, Jesús / González, Beatriz / Matos, Juan-Carlos	Hydrogen embrittlement and notch tensile strength of pearlitic steel: a numerical approach	2444-2449
Seyda, Jan / Pejkowski, Łukasz / Skibicki, Dariusz	Identification of fatigue damage mechanism in PA38-T6 aluminum alloy under multiaxial loadings – initial research	1458-1466
Andrade, Pedro / Santos, José / Maia, Lino	Improvement of Staircases Vibration Serviceability to Human Ergonomics: A Case Study	287-294
Nobile, Riccardo / Saponaro, Andrea	In-situ measurements of fatigue damage evolution by electrical resistance method	1321-1328
Sadeghi, M. Z. / Zimmermann, J. / Saravana, K. / Gabener, A. / Dafnis, A. / Schröder, K. U.	Influence of fracture envelope on FE failure load prediction of adhesively bonded joints by using mixed mode bending tests	1601-1620
Toribio, Jesús / Vergara, Diego	Influence of microstructural anisotropy on the hydrogen-assisted fracture of notched samples of progressively drawn pearlitic steel	2390-2395
Sardinha, Manuel / Frutuoso, Nuno / Vicente, Carlos M. S. / Ribeiro, Relógio / Leite, Marco / Reis, Luis	Influence of seams in the mechanical properties of PLA produced with multiple extrusion modules	358-363
Iasnii, V. / Yasniy, P.	The influence of stress ratio on fatigue lifetime of NiTi shape memory alloy	1551-1558
Wang, Zhen / Suo, Tao / Manes, Andrea	Inhomogeneous FEM model for fracture simulation of aluminosilicate glass	266-278
Petrov, Yuri / Kazarinov, Nikita	Instabilities encountered in the dynamic crack propagation process under impact loading as a natural consequence of the dynamic fracture discreetness	1975-1980
Bellini, Costanzo / Berto, Filippo / Di Cocco, Vittorio / Iacoviello, Francesco	An integrated model to predict the microstructure evolution and the mechanical behaviour of a two-phases pseudo-elastic SMA	2283-2290
Palkanoglou, Evangelia Nektaria / Baxevanakis, Konstantinos P. / Silberschmidt, Vadim V.	Interfacial debonding in compacted graphite iron: effect of thermal loading	1286-1294
Alena, Vedernikova / Anastasiia, Kostina / Oleg, Plekhov	The introduction of critical distance in the description of dynamic experiments based on simulation mesodefect evolution	1160-1166
Singh, Anurag / Miranda Guedes, Rui	Investigating Mechanical Properties of PGLA Fibres as a Function of Degradation Time	2218-2227
Bondarchuk, D. A. / Fedulov, B. N. / Fedorenko, A. N. / Lomakin, E. V.	Investigation into residual stresses inherited during manufacturing of carbon-epoxy composites with delamination	743-751
Matvienko, Y. / Pisarev, V. / Eleonsky, S.	Investigation of fatigue damage accumulation by measurements of deformation response to narrow notch increment	584-590
Hristova, Vesela / Dikova, Tsanka / Panov, Vladimir	Investigation of microleakage in V-shaped tooth defects filled with different restorative materials	1002-1009
Zhang, Ping / Baxevanakis, Konstantinos P. / Zhao, Liguo	An investigation of short crack propagation in a single crystal Ni-based superalloy using crystal plasticity and the extended finite element method	1176-1183
Li, Mingyang / Oterkus, Selda / Oterkus, Erkan	Investigation of the effect of porosity on intergranular brittle fracture using peridynamics	472-481
Galadima, Yakubu Kasimu / Oterkus, Erkan / Oterkus, Selda	Investigation of the effect of shape of inclusions on homogenized properties by using peridynamics	1094-1105
Lukyanchuk, A. A. / Pankov, A. V. / Kalinin, A. G. / Konovalov, V. V. / Lukyanchuk, V. G.	Investigation of the influence of low amplitude loads on the fatigue life of CFRP specimens with impact damage under irregular loading	2291-2296
Liu, Haibao / Liu, Jun / Ding, Yuzhe / Hall, Zoe / Luo, Lilong / Zhou, Jin / Kong, Xiangshao / Blackman, Bamber R. K. / Kinloch, Anthony J. / Dear, John P.	Investigations on the impact behaviour of fibre-reinforced composites: effect of impact energy and impactor shape	106-115
Balbín, J. A. / Chaves, V. / Larrosa, N. O. / Navarro, A.	An iterative technique to assess the fatigue strength of notched components	1167-1175
Bouaziz, Mohamed Ali / Marae Djouda, Joseph / hild, François	J-integral evaluation of additively manufactured polymer using local kinematic field measurements and finite element simulations	393-402
Puppio, M. L. / Vagaggini, E. / Giresini, L. / Sassu, M.	Large-scale survey method for the integrity of historical urban walls: application to the case of Volterra (Italy)	330-343
Jelić, Mirjana / Sedmak, Aleksandar	The largest pre-stressed concrete Dome in the world – the case study of "Hall 1 of the Belgrade Fair"	1833-1838
Vlădulescu, Florian / Constantinescu, Dan Mihai	Lattice topology homogenization and crack propagation through finite element analyses	637-647
Rigon, D. / Ricotta, M. / Meneghetti, G.	A literature survey on structural integrity of 3D printed virgin and recycled ABS and PP compounds	1655-1663
Rizov, Victor	Longitudinal cracks in non-linear elastic inhomogeneous round bars subjected to tension	1237-1248
Rizov, Victor	Longitudinal fracture analysis of continuously inhomogeneous beam in torsion with stress relaxation	1212-1225
Rizov, Victor	Longitudinal fracture analysis of inhomogeneous non-linear elastic rod with internal crack in torsion	1226-1236
Tanrıkulu, Barış / Yurtdaş, Sezgin / Toparli, M. Burak / Kılıçaslan, Cenk / İnce, Umut	Loosening Behavior of Ripped Nuts Based on the Fastener Tightening Strategy and Plate Hardness	1267-1275
Toribio, Jesús / González, Beatriz / Matos, Juan-Carlos	Macro- and micro-approach to locally multiaxial fatigue crack paths in oriented and non-oriented pearlitic microstructures	2396-2403
Reznikov, Dmitry O. / Makhutov, NikolayA. / Yudina, Olga N.	Management of risks induced by hazardous industrial facilities	1360-1368
Sedmak, A. / Grbović, A. / Kirin, S. / Šarkočević, Ž. / Zaidi, R.	Material Effects on Risk Assessment of Residual Life of Oil Drilling Rig Pipe	1315-1320
Shojaei, Pouya / Scazzosi, Riccardo / Trabia, Mohamed / O’Toole, Brendan / Giglio, Marco / Zhang, Xing / Liao, Yiliang / Manes, Andrea	Material Model Characterization of a Ti/SiC Metal Matrix Nanocomposite Coating Subjected to Hypervelocity Impact	525-537
Markides, Christos F. / Kourkoulis, Stavros K.	Mathematical formulation of an analytic approach to the stress field in a flattened Brazilian disc	710-719
Igumnov, L. A. / Abrosimov, N. A. / Novoseltseva, N. A.	Mathematical modeling of progressive failure of two-layer metal-plastic shells of revolution under pulse loading	1909-1917
Jones, Rhys / Kinloch, Anthony J. / Michopoulos, John G. / Peng, Daren	A means for industry to determine the economic life of bonded joints under representative operation flight loads	370-380
Dimou, Angeliki-Eirini / Charalampidou, Christina-Margarita / Metaxa, Zoi S. / Kourkoulis, Stavros K. / Karatasios, Ioannis / Asimakopoulos, Georgios / Alexopoulos, Nikolaos D.	Mechanical and electrical properties of hydraulic lime pastes reinforced with carbon nanomaterials	1694-1701
Majid, Fatima / Zekeriti, Najat / Rhanim, Rajaa / Lahlou, Mohammed / Rhanim, Hassan / Mrani, Brahim	Mechanical behavior and crack propagation of ABS 3D printed specimens	1719-1726
Costanza, Girolamo / Tata, Maria Elisa	Mechanical behavior of Nd:YAG laser welded aluminum alloys	132-138
Ogoreltceva, Nina / Fedorova, Elena / Puzanov, Ilya / Zavadyak, Andrey / Nagibin, Gennady / Kirillova, Irina	Method of protection of cathode blocks of aluminium electrolysis cells	1340-1346
Gosch, Anja / Geier, Jutta / Arbeiter, Florian / Berer, Michael / Pinter, Gerald	Methods for automated crack length detection in fracture mechanical fatigue tests of unreinforced polymers	1184-1192
Bouaziz, Mohamed Ali / Marae Djouda, Joseph / Kauffmann, Julien / hild, François	Microscale mechanical characterization of 17-4PH stainless steel fabricated by Atomic Diffusion Additive Manufacturing (ADAM)	1039-1046
Ren, Sicong / Marini, Bernard / Joly, Pierre / Todeschini, Patrick	Microstructure-informed modelling of the fracture toughness of alloys representing macro-segregated zones in heavy forgings	684-692
Malikova, Lucie / Miarka, Petr / Šimonová, Hana	Mixed-mode crack propagation in a semi-circular disc under bending made of an environmental-friendly concrete	403-410
Ribeiro, J. P. S. M. B. / Campilho, Raul D. S. G. / Rocha, R. J. B.	Mixed-mode evaluation of ductile adhesive joints by the single-leg bending test	1106-1115
da Costa, Pedro R. / Montalvão, Diogo / Reis, Luis / Freitas, Manuel	Modal and strain experimental analysis to an improved axial-axial cruciform specimen for ultrasonic fatigue testing	910-916
Sapora, Alberto / Cornetti, Pietro / Campagnolo, Alberto / Meneghetti, Giovanni	Mode I fatigue limit of V- and U-notches	446-451
Zekriti, Najat / Rhanim, Rajaa / Majid, Fatima / Lahlou, Mohammed / Ibrahim, Mrani / Rhanim, Hassan	Mode I stress intensity factors of printed and extruded specimens based on Digital Image Correlation method (DIC): case of ABS material	1745-1754
Gok, Eda / Yolum, Uğur / Güler, Mehmet A.	Mode II and Mixed Mode Delamination Growth in Composite Materials Using Peridynamic Theory	2043-2054
Rayhan, Saiaf Bin / Rahman, Md Mazedur	Modeling elastic properties of unidirectional composite materials using Ansys Material Designer	1892-1900
Hectors, Kris / De Waele, Wim	Modeling nonlinear fatigue damage accumulation in a welded runway girder	239-252
Yasniy, Oleh / Didych, Iryna / Fedak, Sergiy / Lapusta, Yuri	Modeling of AMg6 aluminum alloy jump-like deformation properties by machine learning methods	1392-1398
Novak, Jelena Srnec / Franulović, Marina / Benasciutti, Denis / De Bona, Francesco	Modeling the cyclic plasticity behavior of 42CrMo4 steel with an isotropic model calibrated on the whole shape of the evolution curve	53-60
Jones, L. D. / Vandeperre, L. J. / Haynes, T. A. / Wenman, M. R.	Modelling of Weibull Distributions in Brittle Solids Using 2-Dimensional Peridynamics	1856-1874
Gusev, G. N. / Shardakov, I. N.	Monitoring of stress-strain state in steel oil storage tanks. Features of strain gauges transducers application in severe environment	2328-2334
Triantis, Dimos / Stavrakas, Ilias / Kyriazopoulos, Antonios / Pasiou, Ermioni D. / Kourkoulis, Stavros K.	Monitoring the mechanical response of early aged cement-mortar specimens using the Pressure Stimulated Currents technique	502-510
Dantas, Rita / Correia, José / Lesiuk, Grzegorz / Rozumek, Dariusz / Zhu, Shun-Peng / de Jesús, Abílio / Susmel, Luca / Berto, Filippo	Multiaxial fatigue assessment of S355 steel in the high-cycle region by using Susmel’s criterion	796-803
Branco, R. / Costa, J. D. / Borrego, L. P. / Berto, F. / Razavi, J. / Macek, W.	Multiaxial fatigue life assessment in notched components based on the effective strain energy density	1808-1815
Song, Wei / Liu, Xuesong / Xu, Jie / Fan, Yu / Berto, Filippo	Multiaxial low cycle fatigue assessment of notch specimens for 10CrNi3MoV steel and its welds	200-207
Beber, Vinicius Carrillo / Brede, Markus	Multiaxial static and fatigue behaviour of elastic and structural adhesives for railway applications	1950-1962
Toribio, Jesús	Multiscale microstructural evolution in cold drawn pearlitic steel: A Palimpsestus Approach and a Tribute to Raffaello	2424-2431
Tserpes, Konstantinos / Bazios, Panagiotis / Pantelakis, Spiros / Michailidis, Nikolaos	Nanoindentation testing and simulation of nanocrystalline materials	1644-1649
Kocatürk, Fatih / Toparli, M. Burak / Tanrıkulu, Barış / İnce, Umut / Kılıçaslan, Cenk	A new analytical model to estimate maximum internal socket depth of non-reduced strength bolts	1276-1285
Farahani, Behzad V. / de Melo, Francisco Q. / Tavares, Paulo J. / Moreira, Pedro M. G. P.	New Approaches on the Stress Intensity Factor Characterization - Review	226-233
Balueva, Alla V. / Dashevskiy, Ilia N. / Magana, Jerry	A New Model For Hydrogen-Induced Crack (HIC) Growth in Metal Alloy Pipelines Under Extreme Pressure	873-885
Li, Yifan / Pavier, Martyn J. / Coules, Harry	A new specimen for mixed mode I/II fracture of brittle and quasi-brittle materials	1140-1147
Eslami, Shayan / Vilhena, Flávio A. T. / Marques, A. T. / Moreira, P. M. G. P.	New Technological Solution for Friction Stir Welding of Composites	659-666
Jones, Rhys / Molaei, Reza / Fatemi, Ali / Peng, Daren / Phan, Nam	A note on computing the growth of small cracks in AM Ti-6Al-4V	364-369
Farahani, Behzad V. / de Melo, Francisco Q. / Tavares, Paulo J. / Moreira, Pedro M. G. P.	A Novel Analytical Solution on the Mode I SIF for Finite Plates with Slanted Cracks	218-225
Luca, Romanin / Paolo, Ferro / Filippo, Berto	A Novel Method for Welding Residual Deformations Prediction	171-179
Fedorov, Andrey	Numerical analysis of stresses near the vertices of a single and several radial spatial cracks	2245-2252
Meneghetti, G. / Vecchiato, L. / Campagnolo, A. / Rech, P. / Cova, M.	Numerical calibration of the direct current potential drop (DCPD) method in fracture mechanics fatigue tests	1536-1550
Zhabbarov, R. M. / Stepanova, L. V.	Numerical determination of coefficients of multi-parameter asymptotic expansion of the crack-tip stress field using FEM	1768-1773
Souto, Carlos D. S. / Tavares, Sérgio M. O. / Correia, José A. F. O. / de Jesus, Abilio M. P.	Numerical determination of stress intensity factors: J-integral and modified virtual crack closure technique	146-154
Mbacké, Mamadou Abdoul / Bensaada, Rachid / Raujol, Jonathan / Lascoup, Bertrand / Filiot, Astrid	Numerical implementation of a fatigue cohesive zone model and simulation of mode I crack propagation of adhesively bonded composites	1431-1437
Saksala, Timo / Mäkinen, Jari	Numerical modelling of cracking in gravity dam under static and seismic loadings with multiple pre-embedded discontinuity FEM	784-789
Zhelnin, M. / Kostina, A. / Plekhov, O. / Levin, L.	Numerical simulation of cement grouting of saturated soil during a mine shaft sinking using the artificial ground freezing	693-701
Ford, M. / Jivkov, A. P. / James, P. M.	Observations of cleavage initiation in ferritic steel	1787-1794
Ståhle, Per / Shahmardani, Mahdieh / Kao-Walter, Sharon	On buckling and fracture of thin elastic-plastic foils	2065-2071
Nikitin, I. S. / Burago, N. G. / Nikitin, A. D. / Stratula, B. A.	On kinetic model of damage development	2032-2042
Toribio, Jesús	On the concept of micro-fracture map (MFM) and its role in structural integrity evaluations in materials science and engineering: A Tribute to Jorge Manrique	2432-2437
Funari, Marco Francesco / Spadea, Saverio / Fabbrocino, Francesco / Lonetti, Paolo	On the elastic properties of PVC foam	1503-1510
Pucillo, Giovanni Pio / Carrabs, Alessandro / Cuomo, Stefano / Elliott, Adam / Meo, Michele	On the fatigue improvement of railways superstructure components due to cold expansion – Part I: Experimental analysis	1998-2012
Pucillo, Giovanni Pio / Carrabs, Alessandro / Cuomo, Stefano / Elliott, Adam / Meo, Michele	On the fatigue improvement of railways superstructure components due to cold expansion – Part II: Finite element prediction	2013-2025
Toribio, Jesús / Ayaso, Francisco-Javier	On the necessity of triaxiality and microstructural orientation to produce anisotropic fracture in cold drawn pearlitic steel: Resembling John Ford’s Monument Valley	2416-2423
Cicero, S. / Torabi, A. R. / Majidi, H. R. / Gómez, F. J.	On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior	84-92
Prakash, Raghu V. / Thomas, Manuel / Prakash, Anirudh R. / Mukhopadhyay, C. K.	Online Acoustic Emission Monitoring of Cyclic Ball Indentation Testing - Correlation with Hysteresis Area Response	1629-1636
Maruccio, Claudio / Montegiglio, Pasquale / Kefal, Adnan	Parameter identification strategy for online detection of faults in smart structures for energy harvesting and sensing	2104-2109
Yang, Zhenghao / Oterkus, Selda / Oterkus, Erkan	Peridynamic formulation for Timoshenko beam	464-471
Lu, Wei / Oterkus, Selda / Oterkus, Erkan	Peridynamic modelling of Hertzian indentation fracture	1559-1571
Xia, Wenxuan / Oterkus, Erkan / Oterkus, Selda	Peridynamic modelling of periodic microstructured materials	820-828
Ignatev, Maksim / Kazarinov, Nikita / Petrov, Yuri	Peridynamic modelling of the dynamic crack initiation	1650-1654
Oterkus, Erkan / Madenci, Erdogan / Oterkus, Selda	Peridynamic shell membrane formulation	411-417
Botvina, L. R. / Sinev, I. O. / Larionova, A. V.	Physical based parameter of statistical strength distributions	1686-1693
Valvo, Paolo S.	A physically consistent virtual crack closure technique accounting for contact and interpenetration	2350-2369
Sazhenkov, N. A. / Semenov, S. V. / Voronov, L. V. / Kurakin, A. D. / Sh. Nikhamkin, Mikhail / Stergiou, T. / Baxevanakis, K. P. / Roy, A. / Silberschmidt, Vadim V.	Polyurea-coated glass-fibre-reinforced laminate under high-speed impact: experimental study	1572-1578
Bellini, Costanzo / Borrelli, Rosario / Di Cocco, Vittorio / Franchitti, Stefania / Iacoviello, Francesco / Sorrentino, Luca	Potentiality of hybrid structures in CFRP and additive manufactured metal octet-truss lattice	667-674
Bamgboye, Abigael / Haynes, Thomas A. / Wenman, Mark R.	Predicting crack patterns in SiC-based cladding for LWR applications using peridynamics	1520-1535
Sergiy, Kotrechko / Andrei, Timoshevskii / Eugene, Kolyvoshko / Yuriy, Matviychuk / Nataliya, Stetsenko	Predicting the lifetime of nanoelements: a new trend in micromechanics	116-123
Namdar, Abdoullah	Prediction of the settlement of a pile and assessment seismic soil-pile interaction - An analytical investigation	311-322
Georgievskaia, Evgeniia	Predictive analytics as a way to smart maintenance of hydraulic turbines	836-842
Mallor, C. / Calvo, S. / Núñez, J. L. / Rodríguez-Barrachina, R. / Landaberea, A.	Propagation of uncertainty in fatigue crack growth for probabilistic life estimation	619-626
Kosheleva, N. A. / Serovaev, G. S. / Gusev, G. N.	Registration of evolution of process-induced strains in cement mixtures by embedded fiber Bragg grating sensors	1883-1891
Nykyforchyn, Hryhoriy / Tsyrulnyk, Oleksandr / Zvirko, Olha / Hredil, Myroslava	Role of hydrogen in operational degradation of pipeline steel	896-902
Toribio, Jesús / Lorenzo, Miguel / Vergara, Diego / Aguado, Leticia	The role of local plasticity in the redistribution of stress fields caused by in-service fatigue overloads	2386-2389
Kumar, Avanish / Singh, Aparna	The Role of Microstructure on Damage Tolerance in Nano-Bainitic Steels	93-100
Arroyo, B. / Alvarez, J. A. / Gutiérrez-Solana, F. / Lacalle, R. / Cicero, S.	The role of the testing rate on Small Punch tests for the estimation of fracture toughness in hydrogen embrittlement	188-199
Kirin, Snežana / Li, Wei / Brzaković, Miodrag / Miljanović, Igor / Sedmak, Aleksandar	Rules of Risk Management - Case Study of Open Pit Mine	764-769
Bandeira, Carlos Filipe Cardoso / Pinho de Castro, Jaime Tupiassú / Pradelle, Florian / Kenedi, Paulo Pedro	Sensitivity analysis of load frequency and block cycles on the fatigue limit measurement by thermographic method	1969-1974
Mhanna, Haya H. / Hawileh, Rami A. / Abdalla, Jamal A.	Shear strengthening of reinforced concrete T-beams using CFRP laminates anchored with bent CFRP splay anchors	811-819
Gorokhov, Vasilii / Kazakov, Dmitrii / Kapustin, Sergei / Churilov, Yuriy	Simulation of fracture of heat-resistant alloys under creep and neutron irradiation conditions	1416-1425
Mella, Daniel / Brevis, Wernher / Susmel, Luca	Single cylinder subjected to vortex-induced vibrations: estimating cyclic stresses for fatigue assessment	511-516
Pascoe, John-Alan	Slow-growth damage tolerance for fatigue after impact in FRP composites: Why current research won’t get us there	726-733
Ng, Chin Tze / Susmel, Luca	Static assessment of notched additively manufactured acrylonitrile butadiene styrene (ABS)	627-636
Benedetti, M. / Santus, C.	Statistical evaluation of the critical distance in the finite life fatigue regime	702-709
Ferro, Paolo / Berto, Filippo	The strain energy density approach applied to bonded joints	19-25
Bergmayr, Thomas / Winklberger, Markus / Kralovec, Christoph / Schagerl, Martin	Strain measurements along zero-strain trajectories as possible structural health monitoring method for debonding initiation and propagation in aircraft sandwich structures	1473-1480
Shamchi, Sahand P. / Singh, Anurag / Sguazzo, Carmen / Zhao, Zhongjie / Yi, Xiaosu / Tavares, Paulo J. / Moreira, Pedro M. G. P.	Strain-rate sensitivity of electrically modified carbon/epoxy composites under dynamic compressive loading	1664-1672
Falliano, Devid / Restuccia, Luciana / Ferro, Giuseppe Andrea / Gugliandolo, Ernesto	Strategies to increase the compressive strength of ultra-lightweight foamed concrete	1673-1678
Toribio, Jesús / Matos, Juan-Carlos / González, Beatriz	Stress intensity factor for an eccentric circular inner crack in a round bar subjected to tensile loading	2382-2385
Martins, Rui F. / Ferreira, Luís	Stress intensity factors KI, KII, KIII, Keq, induced at the crack tip of CT specimens subjected to torsional loading	74-83
Pozhylenkov, O. / Vaysfeld, N.	Stress state of a rectangular domain with the mixed boundary conditions	458-463
Weiland, J. / Luber, M. / Seewald, R. / Schiebahn, A. / Engelbrecht, R. / Reisgen, U.	Structural Health Monitoring of Adhesively Bonded Joints: Proposing a new Method by use of Polymer Optical Fibers	1249-1257
Hastie, James C. / Guz, Igor A. / Kashtalyan, Maria	Structural integrity of deepwater composite pipes under combined thermal and mechanical loading	850-863
Serra, J. / Morgado, T.	Structural integrity study of steel railway gearbox housing	381-392
Dimou, Angeliki-Eirini / Sakellariou, Ioanna / Maistros, George M. / Alexopoulos, Nikolaos D.	Study of Reduced Graphene Oxide Dispersions via Electrical Impedance Spectroscopy	1679-1685
Yassine, Chahboub / Szabolcs, Szavai	The Study of the Sensitivity of GTN Parameters	1930-1940
Shpenev, A. G. / Muravyeva, T. I. / Shkalei, I. V. / Kulakov, V. V. / Golubkov, A. K.	The study of the surface fracture during wear of C/C fiber composites by SPM and SEM	1702-1708
Marcalikova, Zuzana / Mateckova, Pavlina / Racek, Miroslav / Bujdos, David	Study on Shear Behavior of Steel Fiber Reinforced Concrete Small Beams	957-963
Raheem, Hassan Mansour / Aljanabi, Mohanad	Studying the Bulging of a Lumbar Intervertebral Disc: A Finite Element Analysis	1727-1732
Viespoli, Luigi Mario / Johanson, Audun / Alvaro, Antonio / Nyhus, Bård / Berto, Filippo	Subsea power cable sheathing: an investigation of lead fatigue performance	344-351
Saatsakis, George / Linardatos, Dionysios / Ninos, Konstantinos / Valais, Ioannis / Kalyvas, Nektarios / Bakas, Athanasios / Kandarakis, Ioannis / Fountos, George / Panayiotakis, George / Michail, Christos	Temperature Dependence of the Luminescence output of CdWO4 Crystal. Comparison with CaF2:Eu	971-977
Wan, Di / Viespoli, Luigi Mario / Johanson, Audun / Hagen, Anette Brocks / Berto, Filippo / Alvaro, Antonio	Tensile and fatigue behavior of a Pb-Sn-Sb alloy investigated via small-scale in-situ mechanical testing in SEM	648-658
Tyutin, M. R. / Botvina, L. R. / Petersen, T. B.	Tensile damage evolution of structural steels with different structure	2148-2156
Bahrami, Bahador / Ayatollahi, Majid R. / Ghouli, Saeid	Theory of critical distance combined with the generalized strain energy density criterion for mixed mode fracture assessment of PMMA dental materials	829-835
Alanazi, N. / Susmel, L.	The Theory of Critical Distances to Predict Static and Dynamic Strength of Notched Plain Concrete under Mixed-Mode I/II Loading	886-895
Panella, F. W. / Pirinu, A.	Thermal and ultrasonic analysis of fatigue damaged CFRP samples under traction and bending load	1709-1718
Vantadori, Sabrina / Carpinteri, Andrea / Ronchei, Camilla / Scorza, Daniela / Zanichelli, Andrea	Total life approach analysis of ductile cast iron smooth specimens	1055-1061
Du, Juan / Li, Simin / Silberschmidt, Vadim V.	Trabecular bone remodelling: finite-element simulation	577-583
Zouaoui, Marouene / Gardan, Julien / Lafon, Pascal / Labergere, Carl / Makke, Ali / Recho, Naman	Transverse Isotropic Behavior Identification using Digital Image Correlation of a Pre-structured Material Manufactured by 3D Printing	978-985
Younise, B. / Sedmak, A. / Milosevic, N. / Rakin, M. / Medjo, B.	True Stress-strain Curves for HSLA Steel Weldment – Iteration Procedure Based on DIC and FEM	1992-1997
Toribio, Jesús	Unconventional pearlitic pseudocolonies affecting macro-, micro- and nano-structural integrity of cold-drawn pearlitic steel wires: Resembling van Gogh, Bernini, Mantegna and Picasso	2404-2409
Abdalla, Jamal A. / Mohamed, Khalid / Hawileh, Rami A.	Use of Bore-Epoxy Anchorage System with CFRP Sheets for Shear Strengthening of RC Beams	2342-2349
Major, Stepan	Utilization normal vectors for description of fracture surfaces	561-576
Seibert, Paul / Razavi, Seyed Mohammad Javad / Susmel, Luca / Berto, Filippo / Kästner, Markus	Validation of the Averaged Strain Energy Density Criterion for Additively Manufactured Notched Polylactide Acid Specimens	2099-2103
Monkova, Katarina / Urban, Marek / Monka, Peter / Kozak, Dražan	Verification of stiffness and surface treatment of axial bearing levers by static tests	776-783
Foti, Pietro / Razavi, Seyed Mohammad Javad / Marsavina, Liviu / Berto, Filippo	Volume free strain energy density method for applications to blunt V-notches	734-742
Jones, Rhys / Kinloch, Anthony J.	A way forward for industry to determine valid cyclic-fatigue relationships for polymer-matrix fibre composites	26-38
Djordjevic, Branislav / Sedmak, Aleksandar / Petrovski, Blagoj / Dimic, Aleksandar	Weibull probability distribution for reactor steel 20MnMoNi55 cleavage fracture in transition temperature	295-300

Über diese
Datenseite
IssueID
60193
Veröffentlicht am:
04.12.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Procedia Structural Integrity - 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Procedia Structural Integrity - 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.