Procedia Structural Integrity - 2019

Erschienen:	2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Naveen E, Siva / Abraham, Nimmy Mariam / Anitha Kumari, S. D.	Analysis of Irregular Structures under Earthquake Loads	806-819
Vijayan, Angitha / Abraham, Nimmy Mariam / Anitha Kumari, S. D.	Analysis of structures subjected to crowd loads	696-704
Shashidhar Naik, H. G. / Javagal, Shubha	Analytical Study of the Effects of Delamination in Glare Fiber-Metal Laminate using Modified Virtual Crack Closure Technique (MVCCT)	900-906
Zajam, Saurabh / Joshi, Tushar / Bhattacharya, Bishakh	Application of wavelet analysis and machine learning on vibration data from gas pipelines for structural health monitoring	712-719
Sahoo, K. C. / Goyal, Sunil / Laha, K.	Assessment of creep deformation and rupture behaviour of 304HCu austenitic stainless steel	60-67
Kumar, Ramesh / Singh, Ritu J. / Mishra, J. / Balasubramaniyan, V.	Assessment of Delayed Hydride Cracking at volumetric flaws formed due to bearing pad fretting	577-583
Jha, Akhilesh Kumar / Sathyamoorthy, S. / Prakash, Viswa	Bird strike damage and analysis of UAV’s airframe	416-428
Reddy, C.Jayarami / Venkataramudu, B. / Rao, G. Seshagiri / Reddy, K.Gopinadha / Kumar, Rajesh / Singh, Ranjit Kumar / Madhu, V.	Blast response of Hollow glass (H-glass) fibre reinforced epoxy matrix composites	634-641
Saini, Rahul / Saini, Shivam / Lal, Roshan / Singh, Indra Vir	Buckling and vibrations of FGM circular plates in thermal environment	362-374
Saxena, Ashok	Challenges in predicting crack growth in structures operating in extreme environments	774-781
Korobov, Iu. / Pimenova, O. / Filippov, M. / Khadyev, M. / Ozerets, N. / Mikhailov, S. / Morozov, S. / Davydov, Iu. / Razikov, N.	Characteristics of strain-induced martensitic transformation in welded joints with the structure of metastable austenite	34-43
Javagal, Shubha / Raju, J. / Venkataramana, Katta	A Comparative Study of the Behavior of CFRP and GFRP Laminates in a Plate Specimen Using Modified Virtual Crack Closure Technique (MVCCT)	907-914
Dadhich, Ritesh / Alankar, Alankar	Coupled Crystal Plasticity-Phase Field Modeling of Multi-Phase Metals	104-111
Akaki, Y. / Matsuo, T. / Nishimura, Y. / Miyakawa, S.	Crack size dependency of shear-mode fatigue threshold in bearing steel subjected to continuous hydrogen charging	11-17
Yadav, Hari Krishan / Ballal, A. R. / Thawre, M.M / Vijayanand, V. D.	Creep studies of Cold Worked Austenitic Stainless Steel	605-611
Chatterjee, Ritam / Alankar, Alankar	Crystal Plasticity modeling of dynamic recrystallization in CP Ti	251-258
Das, Bimal / Singh, Akhilendra	Cyclic mean stress relaxation behaviour of P91 steel: Experiments and constitutive modeling	619-626
Botvina, L. R.	Damage evolution and fracture in terms of the theory of phase transition	26-33
Krovvidi, S. C. S. P. Kumar / Goyal, Sunil / Bhaduri, A. K.	Design and analysis of formed bellows for nuclear applications- Case study	855-863
Bedi, Harpreet Singh / Agnihotri, Prabhat K.	Designing the interphase in carbon fiber polymer composites using carbon nanotubes	168-175
Lakshmi, K. / Mohan Rao, A. Rama	Detection of Subtle Damage in Structures through Smart Signal Reconstruction	282-289
Vanapalli, Viswa Teja / Chattopadhyay, J. / Jose, Nevil Martin / Dutta, B. K.	Determination and verification of triaxiality dependent cohesive zone parameters of SA333 Grade 6 steel	521-528
Shikalgar, Taslim D. / Dutta, B. K. / Chattopadhyay, J.	Determination of J-initiation toughness using pre-cracked small punch test specimens	529-536
Shrivastava, K. / Vijayan, K. / Arora, V.	Determination of optimal coupling stiffness using modal updating techniques for Stiffened Plates	556-563
Mohan, P. R. Krishna / Anil Kumar, M. / kumar, Shiva Goutham / Mohite, P. M.	Development of In-house Unidirectional Carbon/epoxy Prepregs and its Characterization for Aerospace Applications	176-183
Venkateswaran, N. / Vinobakrishnan, R. / Nathan, S.Senthur	Development of Mounting Bracket for CCS electronic unit of Armoured Fighting Vehicle	627-633
Bora, Dipankar / Kumar, Manoj / Gautam, Sachin S.	Ductile fracture in tube impact problem using a Lode angle dependent failure criterion	537-543
Verma, Vikas / Tewari, P. C. / Ahamed, Roshan Zameer / Ahmed, Syed Touseef	Effect of Addition of Fly ash and Al2O3 Particles on Mechanical and Tribological Behavior of Al MMC at Varying Load, Time and Speed	68-77
Poonguzhali, A. / Ningshen, S. / Amarendra, G.	Effect of Cold Working on Corrosion Fatigue Behavior of Austenitic Stainless Steel in Acidified Chloride medium	705-711
Krishna, D. Anupama / Priyadarsini, R. S. / Narayanan, S.	Effect of Elevated Temperatures on the Mechanical Properties of Concrete	384-394
Khare, Vivek / Srivastava, Shubham / Kamle, Sudhir / Kamath, G. M.	Effect of Filler Functionalization on the Thermo-Mechanical behavior of Polypropylene Nanocomposites	215-225
Yoshimoto, Takuya / Matsuo, Takashi / Ikeda, Tomohiro	The effect of graphite size on hydrogen absorption and tensile properties of ferritic ductile cast iron	18-25
Singh, Rajwinder / Singh, Amanjot / Singh, Pawan K. / Mahajan, Dhiraj K.	Effect of hydrogen on short crack propagation in SA508 Grade 3 Class I low alloy steel under cyclic loading	930-936
Shetty, Kishora / Srihari, Shylaja / Manjunatha, CM	Effect of hygrothermal aging on the interlaminar shear strength of a carbon fibre composite	849-854
Chouhan, Hemant / Asija, N. / Ahmed, A. / Bhatnagar, Naresh	Effect of Moisture on High Strain Rate Performance of UHMWPE Fiber Based Composite	830-838
Shah, Priti Kotak / Kumar, Ashwini / Rath, B. N. / Dubey, J. S.	Effect Of Notch Orientation On Fracture Behaviour Of Textured Zr-2.5Nb Material	242-250
Kavale, Sanjeev M. / Kodancha, Krishnaraja G. / Ekabote, Nagaraj	Effect of Poisson’s ratio on KI, T11 and T33 for SENB and CT specimen – A FE study	584-596
Singh, Amit / Balasundar, I. / Gautam, J. P. / Raghu, T.	Effect of primary α phase fraction on tensile behavior of IMI 834 alloy	78-88
Choudha, Pankaj K. / Kumaraswamy, A. / Dutta, Gour Gopal / Dhote, Kusumkant D.	Effect of shape of explosive charge in failure of rolled homogenous armour plate	191-198
Shukla, Sourabh / Patil, Awanikumar P.	Effect of Strain Induced Martensite Reversal on the Degree of Sensitization of Metastable Austenitic Stainless Steel	259-264
Shaikh, Afroz / Kumar, Santosh / Dawari, Ashish / Kirwai, Shreyas / Patil, Atul / Singh, Rajkumar	Effect of Temperature and Cooling Rates on the α+β Morphology of Ti-6Al-4V Alloy	782-789
Rani, S. Usha / Preethi, M.	Effect of tempering temperature and time on microstructure and mechanical properties of 26MnB5 martensitic steel tubes	142-149
Reddy, T. Sreekantha / Mogulanna, K. / Reddy, K. Gopinadha / Subba Reddy, P. Rama / Madhu, Vemuri	Effect of thickness on behaviour of E-glass/epoxy composite laminates under low velocity impact	265-272
Nakamura, Takashi / Yoshinaka, Fumiyoshi	Effects of vacuum-like environment on small internal crack growth processes in very high cycle fatigue	978-985
Srikanth, V. / Laik, A.	Estimation of residual stresses developed in SS 304L / Zr-2.5%Nb joints	952-956
Narendar, S. / Gopikrishna, R.	Evaluation of structural integrity of tactical missile ceramic radomes under combined thermal and structural loads	89-95
Kumar, Pankaj / Singh, Akhilendra	Experimental and numerical investigations of low cycle fatigue behavior of cryorolled AA 5754	96-103
Prawin, J. / Rao, A. Rama Mohan	Extraction of Opening and Closing States of Cracked Structure using Adaptive Volterra Filter Model	234-241
Manda, Premkumar / Singh, Satyapal / Singh, A. K.	Failure Analysis of Cooling Duct of Top Engine Cowl Panel of Fighter Aircraft	467-474
Govind, V. Kiran / Hussain, N. Anshath / Nair, VP Gopalakrishnan / Sebastian, M. Sabu	Failure Analysis of Metallic Armoured Electro-Optic Mechanical Cables in Underwater Towed Sonar Systems	435-441
Patri, Sudheer / Kumar, Hemant / Prasad, K. Krishna / Meikandamurthy, C. / Sreedhar, B. K. / Vijayashree, R. / Prakash, V. / Selvaraj, P.	Failure analysis of structural screw joint in a start-up neutron detector handling mechanism	688-695
Sharma, Rajesh / Vijayalakshmi, E. / Reddy, R. / Tekade, P. / Singh, Satyapal / Singh, A. K.	Failure investigation of cartridge case	738-745
Shridhar, K. / Suresh, B. S. / Kumar, M.Mohan	Fatigue Analysis of Wing-Fuselage Lug section of a Transport Aircraft	375-383
Bandgar, Sachin / Gupta, Chiradeep / Rao, Gaurav / Malik, Pranshu / Singh, R. N. / Sridhar, K.	Fatigue Crack Growth Rate Behaviour of HSLA Steel at Varying Load Amplitudes	330-336
Vishnuvardhan, S. / Saravanan, M. / Gandhi, P. / Raghava, G.	Fatigue Crack Growth Studies on Power Plant Piping Materials under Corrosive Environment	482-490
Chikmath, L. / Ramanath, M. N. / Dattaguru, B.	Fatigue Life Benefits of Cold Worked Holes in Fastener Joints	922-929
Singh, M. K. / Kitey, R.	Filler size effect on fracture behavior of milled-fiber composites	475-481
Prasad, Sanjay / Bhatnagar, Naresh	Finite Element Simulation of Armor Steel used for Blast Protection	514-520
Bharadwaja, B. V. S. S. / Alankar, Alankar	Formation of GNDs in copper single crystal under pure bending considering planar double slip	612-618
Singh, Arun Kumar / Shukla, Dharmendra Kumar / Prasad, N. Eswara	Fracture behaviour of p-Aramid and ultra high molecular weight polyethylene based hybrid composite	720-728
Brandt, Robert / Busch, Arne	Fracture Toughness and Strength of the Interface of an Intrinsic Hybrid Laminate	891-899
Makhutov, Nikolay A. / Reznikov, Dmitry O.	Generalization of Neuber’s Rule for the Assessment of Local Stresses and Strains in Stress Concentration Zones for a Wide Range of Applied Strains	199-206
Chouhan, Tulsi / Chouhan, Hemant / Soni, Manoj	High Strain Rate Behavior of Aluminum Produced by Powder Metallurgy	883-890
Mishra, Ashish / Alankar, Alankar	Identification of Dislocation Reactions and their Role in Uni-axial Deformation of Copper Single Crystals	544-548
Praveen, C. / Christopher, J. / Ganesan, V. / Shankar, Vani / Reddy, G. V. Prasad / Choudhary, B. K.	Implementation of Internal-State-Variable Based Model into Finite Element Code and its Applicability to Study the Tensile Behaviour of Type 316LN SS With Different Notch Radii	798-805
Arora, Aman / Kumar, Rakesh / Mahajan, Dhiraj K.	In-situ Study of the Effect of Hydrogen on Fatigue Crack Initiation in Polycrystalline Nickel	790-797
Murty, T. Narayana / Chandanshive, Sandeep A. / Kumawat, Bhupender K. / Singh, R. N.	Indentation and hydride orientation in Zr-2.5%Nb pressure tube material	664-667
Suman, Shekhar / Mahesh, Sivasambu	Influence of axial constraint on the creep and plastic deformation of a cladding tube	499-506
Savkin, A. N. / Sunder, R. / Denisevich, D. S. / Badikov, K. A. / Sedov, A. A.	Influence of crack closure and local near-tip stress on crack growth life estimation	429-434
Senthil, P. Ponguru / Rao, K. Sudhakara / Nandi, Hillol Kumar / Singh, Vajinder / Kumar, Suraj / Sankaran, S. / Kumar, K. Siva / Madhu, Vemuri	Influence of niobium microalloying on the microstructure and mechanical properties of high carbon nano bainitic steel	729-737
Nandana, M. S. / Bhat, K. Udaya / Manjunatha, C. M.	Influence of retrogression and re-ageing heat treatment on the fatigue crack growth behavior of 7010 aluminum alloy	314-321
Inturi, Vamsi / Sabareesh, G. R. / Sharma, Vaibhav	Integrated Vibro-Acoustic Analysis and Empirical Mode Decomposition for Fault Diagnosis of Gears in a Wind Turbine	937-944
Chawla, K. / Ray-Chaudhuri, S. / Kitey, R.	Interlaminar Fracture Toughness of Short Fibre Reinforced GFRP Laminates	571-576
Muthu, S. M. / Arivarasu, M. / Arivazhagan, N. / rao, M.Nageswara	Investigation of hot corrosion resistance of bare and Ni-20%Cr coated superalloy 825 to Na2SO4-60%V2O5 environment at 900°C	290-303
Kumar, Santosh / Jadhav, Pravin / Patil, Akshay / Kirwai, Shreyas / Singh, Rajkumar	An Investigation of Performance of Spray Formed H13 Tool Steel	872-882
Kumar, R. K. / SampathKumaran, P. / Seetharamu, S. / Kumar, S. Anand / Pramod, T. / Naveen, G. J.	Investigation of Shot Peening Effect on Titanium Alloy Affecting Surface Residual Stress and Roughness for Aerospace Applications	134-141
Adhikary, Sukamal / Sekhar, Himanshu / Thakur, D. G.	Investigations of Process Parameters on the Mechanical Properties of MTV Decoy Flare Pellets for Defence Applications	127-133
Jain, Manu / Rajashekar, S. / Vasantha, R. / Subramanian, V. / Maharajan, V. / Rangan, V. Ashok	Life extension of UAVs: a case study of Indian UAVs	184-190
Rémy, Luc	Low cycle fatigue of alloys in hot section components: progress in life assessment	3-10
Jose, Nevil Martin / Chattopadhyay, J. / Durgaprasad, P. V. / Kumar, N. Naveen	Master Curve of 20MnMoNi55 Steel From Miniature CT Specimens	403-409
Jagannathan, N. / Gururaja, S. / Manjunatha, C. M.	Matrix cracking in polymer matrix composites under bi-axial loading	864-871
Paulose, Neeta / Majila, Anuradha Nayak / Fernando, D. Chandru / Hans, Parthasarathi	Micro Structural Characterization of CF 8C Alloy and Its Effect on Tensile Properties at Various Temperatures	649-655
Rao, P. Rama / Bhatnagar, Anil K. / Majumdar, Bhaskar / Muraleedharan, K.	Microstructural Evolution of Brazed Ti-joint Using Ti20Zr20Cu50Ni10 Metallic Glass Ribbon as Filler	322-329
Vijayan, K. / Jothi, S. / Pal, A.	Microstructural influence on damping for Friction stir welded Aluminum plates	642-648
Gosavi, P. D. / Sarkar, K. K. / Khunte, S. K. / Pawar, V. R. / Basu, B.	Microstructure and mechanical properties correlation of weld joints of a high strength naval grade steel	304-313
Tauheed, Mohd / Datla, Naresh V.	Mixed-Mode Cohesive Law Estimation of Composite Joints Made of Toughened Epoxy Adhesive	354-361
Kumar, Rakesh / Meena, Deepesh / Mahajan, Dhiraj K.	Modelling of Fatigue Crack Initiation in Hydrogen Charged Polycrystalline Nickel	668-675
Savkin, A. N. / Denisevich, D. S. / Badikov, K. A. / Sedov, A. A.	A new semi-analytical approach for obtaining crack-tip stress distributions under variable-amplitude loading	684-687
Makwana, D. R. / Thakur, D. G. / Senthilkumar, K.	Numerical Analysis and Effects on Rigidity of Combat Vehicle Structure Due to Blast Load	44-52
Vamsi Krishna, G. / Nath De, Tarak / Burman, Rajesh Kumar / Sekhar, B. Veera / Rao, V. Govind	Numerical and experimental comparative study of Aluminum and hybrid mounting interfaces of launch vehicle avionics for weight reduction	820-829
Kumar, Manish / Pandey, V. B. / Singh, I. V. / Mishra, B. K. / Ahmad, S. / Rao, A. V. / Kumar, Vikas	A Numerical Study of Creep Crack Growth in an Aero-engine Turbine Disc using XFEM	839-848
Sai, Vijay / Velaga, Satish K. / Sen, Biswanath / Rao, B. P. C. / Ravisankar, A.	Numerical study on the residual stress distributions in GTA welded dissimilar metal components	491-498
Filin, V.Yu. / Ilyin, A. V.	On the fracture mechanics based development of cleavage fracture resistance criteria for the materials of large-size welded structures	758-773
Ilyin, A. V. / Filin, V.Yu.	On the problem of quantitative service life assessment for high-strength steel welded structures under the effect of corrosion medium	964-977
Rentala, Vamsi Krishna / Mylavarapu, Phani / Gautam, J. P. / Shiva, Gp. Capt. B. V. N. / Gopinath, K. / Kumar, Vikas	Physical Manifestation of a90/95 in Remnant Life Revision Studies of Aero-engine Components	597-604
Puneeth, N. / Satheesh, J. / Naveen, G. J.	Processing and Evaluation of Al6082 based Hybrid Matrix Composites for Fracture Toughness using Taguchi Method	53-59
Singh, Sarthak S. / Chakraborty, P. / Kitey, R.	Quasi static compression behavior of glass filled epoxy composites	915-921
Bhat‎, Praveen / Karunanithi, S.	Relocation of existing jacket platform in western offshore of india ‎	656-663
Swain, Digendranath / Sharma, A. / Selvan, S. K. / Thomas, B. P. / Philip, J.	Residual stress measurement on 3-D printed blocks of Ti-6Al-4V using incremental hole drilling technique	337-344
Subba Reddy, P. Rama / Reddy, T. Sreekantha / Mogulanna, K. / Rao, G. Seshagiri / Madhu, Vemuri / Rao, K. Venkateswara	Role of laminate fracture energy on ballistic performance of glass composite laminates	676-683
Carpinteri, Alberto / Montagnoli, Francesco	Scaling and fractality in fatigue crack growth: Implications to Paris’ law and Wöhler’s curve	957-963
Reddy, Anigani Sudarshan / Srinivasan, Dheepa	Small Scale Mechanical Testing for Additively Manufactured (Direct Metal Laser Sintered) Monolithic and Hybrid Test Samples	449-466
Vaidya, Ashish / Ballal, Atul / Yadav, Hari Krishan / Peshwe, Dilip	Stress Rupture Studies of V-notched Grade 92 Steel for High Temperature Applications	410-415
Raj, S.Thalapathi / Silan, SL / Devgan, VK	Structural damage analysis of explosive testing experimental bay using HEXDAM Modelling software	395-402
Viswanath, V. / Asraff, A. K. / Jayesh, P. / Thomas, Suresh Mathew / Krishnakumar, R. / Muthukumar, R.	Structural Integrity Assessment of a Propellant tank in Presence of Welding Residual Stresses	442-448
Behera, Sameerkant / Sahoo, S. K. / Srivastava, Lokesh / Srinivasa Gopal, A. S.	Structural Integrity Assessment of Filament Wound Composite Pressure Vessel Using Through Transmission Technique	112-118
Chidambaram, S. / Giribaskar, S. / Parameswaran, Venkitanarayanan	Structural integrity of ultrafine grain Al-3%Mg alloy under dynamic loading conditions	226-233
Mahalle, Rohit K. / Manhar, O. P. / Chaudhary, J. C. / Ahamad, S. S. / Naik, G. K.	Study for Analysis of Effect of Machining Parameter & To Predict the Behaviour of Propellant Grain during Machining Operation	945-951
Ahmed, Aisha / Asija, Neelanchali / Chauhan, Hemant / Bhatnagar, Naresh	Study of Polycarbonate Based Nano-composites at High Strain Rate Impact	507-513
Bhalla, Neelanchali Asija / Chouhan, Hemant / Ahmed, Aisha / Bhatnagar, Naresh	Study on the Low and High Strain Rate Behavior of Fumed Nano Silica Dispersions	564-570
Singh, Ritu. J. / Kumar, Ramesh / Mishra, J. / Balasubramaniyam, V.	Study the Effect of Anisotropy of Elastic-Plastic Properties on Residual Stress Development in Autofrettage of Thick Cylinder	549-555
Das, Sandeep / Raman, Randhir Kumar / Devarani, N. / Joshi, Shrikrishna N.	Surface Alloying of Titanium Di-boride (TiB2) and Silicon Carbide (SiC) on Aluminium Al 5052 using Electric Discharge Processing	119-126
Kulkarni, Abhijit / Nanaware, Rushikesh / Kulkarni, Akhilesh / Garud, Vikrant	Synthesis and Optimization of Steering Mechanism of Extra-Long Semi-Trailer Vehicle	158-167
Adusumalli, Ramesh Babu / Venkateshan, Karthik Chethan / Kunchi, Chandrakala / Vadlamani, Surya R.	Tensile testing of single fibres	150-157
Ali, Altaf / Kumar, Anish / Kumar, Kamalesh / Murthy, YRC / Ravinder, B. / Kapoor, Komal / Babu, C. Phani	Ultrasonic Testing as Alternative for Radiography for Evaluation of PFBR Blanket Pin End Plug Weld Integrity	273-281
Chimmat, Manojakumar / Srinivasan, Dheepa	Understanding the Residual Stress in DMLS CoCrMo and SS316L using X-ray diffraction	746-757
Swain, Digendranath / Binu, B. / Purushothaman, K. K. / Rao, G. S. / Thomas, Binu P. / Kurian, Thomas / Narayanan, P. Ramesh / Philip, Jeby	Use of full-field measurements for understanding acoustic emission (AE) signals from 15CDV6 ESR steel specimens	207-214
Neelakandan, Varatharaj / Ganesan, Thulasirajan / Chakrapani Rao, Praveen	Weight Optimization of Housing Bracket for Electrical Starter Motor using FEA	345-353

Über diese
Datenseite
IssueID
60072
Veröffentlicht am:
10.01.2022
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Procedia Structural Integrity - 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Procedia Structural Integrity - 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.