Materials and Structures - v. 57, n. 5 (Mai 2024)

Erschienen:	Mai 2024

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Wang, Z. / Park, Solmoi / Khalid, H. R. / Kim, Seonhyeok / Lee, H. K.	Carbonation behavior of aged alkali-activated fly ash/slag binder modified by MgO with different reactivities
Wijaya, Adhitya Leonard / Nakarai, Kenichiro	Changes in air permeability of restrained expansive concrete under drying condition: contribution of expansive strain
Manawadu, Ayumi / Qiao, Pizhong / Wen, Haifang	Characterization of cementitious substrate-to-overlay interface bonds using strength and fracture tests
Ziari, Hassan / Bananezhad, Sadegh / Ziari, Mohammad Ali / Zalnezhad, Mahdi	Comparison of long-term influence of various recycling agents on bitumen rheological properties
Liu, Sijia / Yu, Long / Xu, Biwan / Yang, Ken / Wang, Shunfeng / Xu, Linglin / Yang, Zhenghong	Damage resistance of calcium sulfoaluminate cement-based engineered cementitious composite (CSA–ECC) under vehicle-bridge coupling vibration
Segura-Castillo, Luis / Monte, Renata / Galobardes, Isaac / de Figueiredo, Antonio D.	Determination of tensile residual strength of fibre reinforced concrete by a robust and simple test
Thaivalappil, Bipina / Shenbagam, Vaishnav Kumar / Chaunsali, Piyush	Early-age hydration of ye'elimite (calcium sulfoaluminate phase) in presence of alkalis: role of calcium sulfate
Shanmugasundaram, N. / Praveenkumar, S.	Eco-friendly modified engineered cementitious composites: a study on mechanical, durability and microstructure characteristics
Lin, Weiqing / Zhou, Fangyuan / Xiao, Henglin / Chen, Zhi / Xi, Lei / Ma, Qiang	Enhancing rheological and adhesion performance of asphalt binder with alkali-activated waste dolomite dust
Lofty, Eslam A. / Kamal, Ismail M. / Hassan, Khaled Mostafa / Hassan, Mostafa A.	Experimental flexural investigation of RC beams with impeded steel truss using smooth steel angels
Sukhija, Mayank / Al-ani, Aliaa F. / Mohammad, Hussein K. / Albayati, Amjad / Wang, Yu	Exploring the efficacy of sawdust ash as a mineral filler substitute for the production of asphalt mixtures
Zhang, Wan / Wu, Zhihong / Huang, Wang / Liu, Jiayuan / Zhou, Huafeng / Qiu, Junlong	Improving the strength of cement mortar by adding ether organics to aluminum sulfate liquid accelerator
Bakera, Alice Titus / Alexander, Mark G.	In situ concrete sewer performance: comparison of Portland cement, calcium sulfoaluminate cement, and calcium aluminate cement
Deetman, Arjen / Bos, Derk / Blaakmeer, Jan / Salet, Theo / Lucas, Sandra	An in-line dye tracer experiment to measure the residence time in continuous concrete processing
Jeong, Hoseong / Jung, Byung Jun / Kim, Jae Hyun / Choi, Seung-Ho / Kim, Kang Su	Indirect measurement of corrosion in reinforced concrete using optical sensor composed of polydimethylsiloxane/titanium oxide composite and sacrificial steel plate
Nashed Kabalan, Ola / Marceau, Sandrine / Ciblac, Thierry / Le Roy, Robert	Influence of bacterial cellulose stabilization on strength characteristics of construction earthen materials
Li, Huanyu / Liebscher, Marco / Yang, Jian / Zhang, Yupeng / Mechtcherine, Viktor	Influence of electrophoretic deposition of micro- or nanosized silica particles on the microstructure of carbon fibers and their bond behavior with cementitious matrices
Krejsová, Jitka / Kužel, Radomír / Keppert, Martin / Scheinherrová, Lenka / Vimmrová, Alena	New insight into the phase changes of gypsum
Teodoro, Chiara P. / Carrazedo, Rogério	Nonlinear numerical analysis of corroded reinforced concrete structures using laminated frame elements
Guo, Bingbing / Chu, Jia / Yu, Ruichang / Wang, Yan / Fu, Qiang / Niu, Ditao / Zhang, Fengling	Pore structure of CO2-cured seawater sea-sand concrete with sufficient carbonation and its mechanical behaviors under uniaxial compression
Katanalp, Burak Yiğit / Taştan, Murat / Ahmedzade, Perviz	Recycling the electric arc furnace waste after geopolymerization in bitumen: experimental analyses and LCA study
Kamakshi, Tippabhotla A. / Subramaniam, Kolluru V. L.	Rheology control and 3D concrete printing with fly ash-based aqueous nano-silica enhanced alkali-activated binders
Honorio, Tulio / Razki, Syrine / Bourdot, Alexandra / Benboudjema, Farid	Thermal properties of ASR products

Über diese
Datenseite
IssueID
74182
Veröffentlicht am:
20.06.2024
Geändert am:
20.06.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Materials and Structures - v. 57, n. 5 (Mai 2024)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Materials and Structures - v. 57, n. 5 (Mai 2024)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.