Materials and Structures - v. 56, n. 8 (September 2023)

Erschienen:	September 2023

Autor(en)	Titel	Seite(n)
Saladi, Naveen / Montanari, Luca / De La Varga, Igor / Spragg, Robert / Graybeal, Benjamin	Assessing durability properties of ultra-high performance concrete-class materials
Ince, Ragip / Bildik, Abdullah Tevfik	Batch design of cementitious composites for the double-K fracture model
Andiyappan, Thavamani / Kuna, Kranthi Kumar	Effect of bio-ethanol industry-based lignin properties on the chemical and high-temperature properties of bitumen–lignin blends
Lima, Daniel F. / Branco, Jorge M. / Parracha, João / Machado, José S. / Nunes, Lina	Effects of anobiid damage on shear strength parallel to the grain in single step joints
David, Martin / Freund, Niklas / Dröder, Klaus / Lowke, Dirk	The effects of nozzle diameter and length on the resulting strand properties for shotcrete 3D printing
Wang, Jun / Cui, Menglin	Experimental investigation and predictive modeling of shear performance for concrete-encased steel beams using artificial neural networks
Oña Vera, Andrea Carolina / Boumakis, Ioannis / Ninčević, Krešimir / Sinn, Lisa-Marie / De Corte, Wouter / Di Luzio, Giovanni / Wan-Wendner, Roman	Experimental investigation of the loading rate effect and the sustained load effect in the concrete cone capacity of cast-in anchors
Cherif, Amira / González-Corrochano, Beatriz / Moussi, Bechir / Jamoussi, Fakher / Alonso-Azcárate, Jacinto	Influence of kiln type on the production of lightweight aggregates
Dams, Barrie / Kumar, Naveen / Kurchania, Rajnish / Stewart, John / Ansell, Martin / Harney, Marion / Ball, Richard J.	Interfacial bond strength and failure modes of traditional and modern repair materials for historic fibrous plaster
Wang, Fang / Ren, Zhijie / Liu, Kai / Yang, Zhong	A mathematical prediction model for calculating the thermal conductivity of the asphalt mixture
Messina, M. / Belda Revert, A. / Gastaldi, M. / Geiker, M. R.	Measurement of the electrical resistivity of cement-based materials using post-embedded probes: effect of contact material
Teschemacher, Tobias / Kalkbrenner, Philip / Pelà, Luca / Wüchner, Roland / Bletzinger, Kai-Uwe	An orthotropic damage model for masonry walls with consistent damage evolution laws
Bersch, Jéssica Deise / Masuero, Angela Borges / Dal Molin, Denise Carpena Coitinho	Photocatalytic coloured rendering mortars: effect of TiO2 and iron oxide pigments on the physical, mechanical, hygric, and photoactive behaviour
Abhijith, B. S. / Narayan, S. P. Atul	Quantification of damage-related dissipation of asphalt concrete using the viscoelastic continuum damage framework
Amziane, Sofiane / Khayat, Kamal / Sonebi, Mohammed / Perrot, Arnaud	RILEM TC 266-MRP: Round-Robin rheological tests on high performance mortar and concrete with adapted rheology—evaluating structural build-up at rest of mortar and concrete
de Rosso, Lucas Torres / de Melo, João Victor Staub	Translucent photocatalytic concrete blocks for paving: impact of service life on the textural characteristics and photocatalytic efficiency
Zhong, Qingyu / Su, Miao / Tian, Xiang / Peng, Hui	Workability and mechanical properties for GGBFS–MK geopolymer synthesis: influencing factor analysis and a mix design method

Autor(en)

Titel

Seite(n)

Saladi, Naveen / Montanari, Luca / De La Varga, Igor / Spragg, Robert / Graybeal, Benjamin

Assessing durability properties of ultra-high performance concrete-class materials

Ince, Ragip / Bildik, Abdullah Tevfik

Batch design of cementitious composites for the double-K fracture model

Andiyappan, Thavamani / Kuna, Kranthi Kumar

Effect of bio-ethanol industry-based lignin properties on the chemical and high-temperature properties of bitumen–lignin blends

Lima, Daniel F. / Branco, Jorge M. / Parracha, João / Machado, José S. / Nunes, Lina

Effects of anobiid damage on shear strength parallel to the grain in single step joints

David, Martin / Freund, Niklas / Dröder, Klaus / Lowke, Dirk

The effects of nozzle diameter and length on the resulting strand properties for shotcrete 3D printing

Wang, Jun / Cui, Menglin

Experimental investigation and predictive modeling of shear performance for concrete-encased steel beams using artificial neural networks

Oña Vera, Andrea Carolina / Boumakis, Ioannis / Ninčević, Krešimir / Sinn, Lisa-Marie / De Corte, Wouter / Di Luzio, Giovanni / Wan-Wendner, Roman

Experimental investigation of the loading rate effect and the sustained load effect in the concrete cone capacity of cast-in anchors

Cherif, Amira / González-Corrochano, Beatriz / Moussi, Bechir / Jamoussi, Fakher / Alonso-Azcárate, Jacinto

Influence of kiln type on the production of lightweight aggregates

Dams, Barrie / Kumar, Naveen / Kurchania, Rajnish / Stewart, John / Ansell, Martin / Harney, Marion / Ball, Richard J.

Interfacial bond strength and failure modes of traditional and modern repair materials for historic fibrous plaster

Wang, Fang / Ren, Zhijie / Liu, Kai / Yang, Zhong

A mathematical prediction model for calculating the thermal conductivity of the asphalt mixture

Messina, M. / Belda Revert, A. / Gastaldi, M. / Geiker, M. R.

Measurement of the electrical resistivity of cement-based materials using post-embedded probes: effect of contact material

Teschemacher, Tobias / Kalkbrenner, Philip / Pelà, Luca / Wüchner, Roland / Bletzinger, Kai-Uwe

An orthotropic damage model for masonry walls with consistent damage evolution laws

Bersch, Jéssica Deise / Masuero, Angela Borges / Dal Molin, Denise Carpena Coitinho

Photocatalytic coloured rendering mortars: effect of TiO2 and iron oxide pigments on the physical, mechanical, hygric, and photoactive behaviour

Abhijith, B. S. / Narayan, S. P. Atul

Quantification of damage-related dissipation of asphalt concrete using the viscoelastic continuum damage framework

Amziane, Sofiane / Khayat, Kamal / Sonebi, Mohammed / Perrot, Arnaud

RILEM TC 266-MRP: Round-Robin rheological tests on high performance mortar and concrete with adapted rheology—evaluating structural build-up at rest of mortar and concrete

de Rosso, Lucas Torres / de Melo, João Victor Staub

Translucent photocatalytic concrete blocks for paving: impact of service life on the textural characteristics and photocatalytic efficiency

Zhong, Qingyu / Su, Miao / Tian, Xiang / Peng, Hui

Workability and mechanical properties for GGBFS–MK geopolymer synthesis: influencing factor analysis and a mix design method

Anzeige

Materials and Structures - v. 56, n. 8 (September 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Materials and Structures - v. 56, n. 8 (September 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.