Materials and Structures - v. 51, n. 1 (Februar 2018)

Erschienen:	Februar 2018

Autor(en)	Titel	Seite(n)
Zaribaf, Behnaz H. / Kurtis, Kimberly E.	Admixture compatibility in metakaolin–portland-limestone cement blends
Bressi, Sara / Colinas-Armijo, Natalia / Di Mino, Gaetano	Analytical approach for the mix design optimisation of bituminous mixtures with crumb rubber
Sgambitterra, E. / Lamuta, C. / Candamano, S. / Pagnotta, L.	Brazilian disk test and digital image correlation: a methodology for the mechanical characterization of brittle materials
Angst, Ueli M.	Challenges and opportunities in corrosion of steel in concrete
Chen, Jun / Wu, Yuning / Yin, Tinyuan / Talebzadeh, Neda / Guo, Quanquan	Characterization of concentrated and distributed cracks in concrete using a harmonic wave modulation technique
Ling, Tung-Chai / Balachandran, Chandni / Munoz, Jose F. / Youtcheff, Jack	Chemical evolution of alkali–silicate reaction (ASR) products: a Raman spectroscopic investigation
Farzanian, K. / Ghahremaninezhad, A.	Desorption of superabsorbent hydrogels with varied chemical compositions in cementitious materials
Bu, Changming / Wen, Kejun / Liu, Shihui / Ogbonnaya, Ubani / Li, Lin	Development of bio-cemented constructional materials through microbial induced calcite precipitation
Chen, Xudong / Xu, Lingyu / Bu, Jingwu	Dynamic tensile test of fly ash concrete under alternating tensile–compressive loading
Benavente, D. / Pla, C.	Effect of pore structure and moisture content on gas diffusion and permeability in porous building stones
Tarifa, Manuel / Ruiz, Gonzalo / Poveda, Elisa / Zhang, Xiaoxin / Vicente, Miguel A. / González, Dorys C.	Effect of uncertainty on load position in the fatigue life of steel-fiber reinforced concrete under compression
Ergenç, Duygu / Fort, Rafael / Silva, António Santos / Veiga, Rosário / Sanz Arauz, David	The effects of DiloCarB as carbonation accelerator on the properties of lime mortars
Rakhshanimehr, Mehrollah / Mousavi, Seyed Roohollah / Esfahani, M. Reza / Farahi Shahri, Saeed	Establishment and experimental validation of an updated predictive equation for the development and lap-spliced length of GFRP bars in concrete
Villar-García, J. R. / Crespo, J. / Moya, M. / Guaita, M.	Experimental and numerical studies of the stress state at the reverse step joint in heavy timber trusses
Steiger, René / Fink, Gerhard / Nerbano, Stella / Hack, Erwin / Beyer, Katrin	Experimental investigation of friction stresses between adjacent panels made of Oriented Strand Board (OSB) and between OSB panels and glued laminated timber (GLT) frame members
Xu, Qingfeng / Leng, Yubing / Chen, Xi / Harries, Kent A. / Chen, Lingzhu / Wang, Zhuolin	Experimental study on flexural performance of glued-laminated-timber-bamboo beams
Ayar, Pooyan / Moreno-Navarro, Fernando / Sol-Sánchez, Miguel / Rubio-Gámez, Mª Carmen	Exploring the recovery of fatigue damage in bituminous mixtures: the role of rest periods
Segura-Castillo, Luis / Cavalaro, Sergio H. P. / Goodier, Chris / Aguado, Antonio / Austin, Simon	Fibre distribution and tensile response anisotropy in sprayed fibre reinforced concrete
Martínez-Ramírez, Sagrario / Diaz, Luis / Martín-Garrido, Moisés / Fernández-Carrasco, Lucia / Torrens, David	In situ chemical modification of C–S–H induced by CO2 laser irradiation
Yao, Yiming / Bakhshi, Mehdi / Nasri, Verya / Mobasher, Barzin	Interaction diagrams for design of hybrid fiber-reinforced tunnel segments
Cuenca, Estefanía / Conforti, Antonio / Minelli, Fausto / Plizzari, Giovanni A. / Navarro Gregori, Juan / Serna, Pedro	A material-performance-based database for FRC and RC elements under shear loading
Bruno, Agostino Walter / Perlot, Céline / Mendes, Joao / Gallipoli, Domenico	A microstructural insight into the hygro-mechanical behaviour of a stabilised hypercompacted earth
Bošnjak, Josipa / Sharma, Akanshu / Öttl, Christian	Modified beam-end test setup to study the bond behavior of reinforcement in concrete after fire
Pierre, Alexandre / Weger, Daniel / Perrot, Arnaud / Lowke, Dirk	Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study
Elkashef, Mohamed / Williams, R. Christopher / Cochran, Eric W.	Physical and chemical characterization of rejuvenated reclaimed asphalt pavement (RAP) binders using rheology testing and pyrolysis gas chromatography-mass spectrometry
Villagrán-Zaccardi, Yury A. / Vollpracht, Anya / Gruyaert, Elke / De Belie, Nele	Recommendation of RILEM TC 238-SCM: determination of the degree of reaction of siliceous fly ash and slag in hydrated cement paste by the selective dissolution method
González-Taboada, Iris / González-Fonteboa, Belén / Martínez-Abella, Fernando / Roussel, Nicolas	Robustness of self-compacting recycled concrete: analysis of sensitivity parameters
Bru, David / Reynau, Ricardo / Baeza, F. Javier / Ivorra, Salvador	Structural damage evaluation of industrial masonry chimneys
Mechtcherine, Viktor / Snoeck, Didier / Schröfl, Christof / De Belie, Nele / Klemm, Agnieszka J. / Ichimiya, Kazuo / Moon, Juhyuk / Wyrzykowski, Mateusz / Lura, Pietro / Toropovs, Nikolajs / Assmann, Alexander / Igarashi, Shin-Ichi / De La Varga, Igor / Almeida, Fernando C. R. / Erk, Kendra / Ribeiro, António Bettencourt / Custódio, João / Reinhardt, Hans Wolf / Falikman, Vyatcheslav	Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: results of a RILEM Round-Robin Test
Graziani, Andrea / Virgili, Amedeo / Cardone, Fabrizio	Testing the bond strength between cold bitumen emulsion composites and aggregate substrate
Park, S. M. / Seo, J. H. / Lee, H. K.	Thermal evolution of hydrates in carbonation-cured Portland cement
Nguyen, Hoang / Rahimi-Aghdam, Saeed / Bažant, Zdeněk P.	Time lag in measuring pore humidity in concrete by a gage in finite cavity
Vrijdaghs, Rutger / di Prisco, Marco / Vandewalle, Lucie	Uniaxial tensile creep of a cracked polypropylene fiber reinforced concrete
Wang, Qiannan / Banthia, Nemkumar / Sun, Wei	Water permeability of repair mortars under an applied compressive stress at early ages
Enjilela, Razieh / Cano-Barrita, Prisciliano F. de J. / Komar, Andrew / Boyd, Andrew J. / Balcom, Bruce J.	Wet front penetration with unsteady state wicking in mortar studied by Magnetic Resonance Imaging (MRI)

Autor(en)

Titel

Seite(n)

Zaribaf, Behnaz H. / Kurtis, Kimberly E.

Admixture compatibility in metakaolin–portland-limestone cement blends

Bressi, Sara / Colinas-Armijo, Natalia / Di Mino, Gaetano

Analytical approach for the mix design optimisation of bituminous mixtures with crumb rubber

Sgambitterra, E. / Lamuta, C. / Candamano, S. / Pagnotta, L.

Brazilian disk test and digital image correlation: a methodology for the mechanical characterization of brittle materials

Angst, Ueli M.

Challenges and opportunities in corrosion of steel in concrete

Chen, Jun / Wu, Yuning / Yin, Tinyuan / Talebzadeh, Neda / Guo, Quanquan

Characterization of concentrated and distributed cracks in concrete using a harmonic wave modulation technique

Ling, Tung-Chai / Balachandran, Chandni / Munoz, Jose F. / Youtcheff, Jack

Chemical evolution of alkali–silicate reaction (ASR) products: a Raman spectroscopic investigation

Farzanian, K. / Ghahremaninezhad, A.

Desorption of superabsorbent hydrogels with varied chemical compositions in cementitious materials

Bu, Changming / Wen, Kejun / Liu, Shihui / Ogbonnaya, Ubani / Li, Lin

Development of bio-cemented constructional materials through microbial induced calcite precipitation

Chen, Xudong / Xu, Lingyu / Bu, Jingwu

Dynamic tensile test of fly ash concrete under alternating tensile–compressive loading

Benavente, D. / Pla, C.

Effect of pore structure and moisture content on gas diffusion and permeability in porous building stones

Tarifa, Manuel / Ruiz, Gonzalo / Poveda, Elisa / Zhang, Xiaoxin / Vicente, Miguel A. / González, Dorys C.

Effect of uncertainty on load position in the fatigue life of steel-fiber reinforced concrete under compression

Ergenç, Duygu / Fort, Rafael / Silva, António Santos / Veiga, Rosário / Sanz Arauz, David

The effects of DiloCarB as carbonation accelerator on the properties of lime mortars

Rakhshanimehr, Mehrollah / Mousavi, Seyed Roohollah / Esfahani, M. Reza / Farahi Shahri, Saeed

Establishment and experimental validation of an updated predictive equation for the development and lap-spliced length of GFRP bars in concrete

Villar-García, J. R. / Crespo, J. / Moya, M. / Guaita, M.

Experimental and numerical studies of the stress state at the reverse step joint in heavy timber trusses

Steiger, René / Fink, Gerhard / Nerbano, Stella / Hack, Erwin / Beyer, Katrin

Experimental investigation of friction stresses between adjacent panels made of Oriented Strand Board (OSB) and between OSB panels and glued laminated timber (GLT) frame members

Xu, Qingfeng / Leng, Yubing / Chen, Xi / Harries, Kent A. / Chen, Lingzhu / Wang, Zhuolin

Experimental study on flexural performance of glued-laminated-timber-bamboo beams

Ayar, Pooyan / Moreno-Navarro, Fernando / Sol-Sánchez, Miguel / Rubio-Gámez, Mª Carmen

Exploring the recovery of fatigue damage in bituminous mixtures: the role of rest periods

Segura-Castillo, Luis / Cavalaro, Sergio H. P. / Goodier, Chris / Aguado, Antonio / Austin, Simon

Fibre distribution and tensile response anisotropy in sprayed fibre reinforced concrete

Martínez-Ramírez, Sagrario / Diaz, Luis / Martín-Garrido, Moisés / Fernández-Carrasco, Lucia / Torrens, David

In situ chemical modification of C–S–H induced by CO2 laser irradiation

Yao, Yiming / Bakhshi, Mehdi / Nasri, Verya / Mobasher, Barzin

Interaction diagrams for design of hybrid fiber-reinforced tunnel segments

Cuenca, Estefanía / Conforti, Antonio / Minelli, Fausto / Plizzari, Giovanni A. / Navarro Gregori, Juan / Serna, Pedro

A material-performance-based database for FRC and RC elements under shear loading

Bruno, Agostino Walter / Perlot, Céline / Mendes, Joao / Gallipoli, Domenico

A microstructural insight into the hygro-mechanical behaviour of a stabilised hypercompacted earth

Bošnjak, Josipa / Sharma, Akanshu / Öttl, Christian

Modified beam-end test setup to study the bond behavior of reinforcement in concrete after fire

Pierre, Alexandre / Weger, Daniel / Perrot, Arnaud / Lowke, Dirk

Penetration of cement pastes into sand packings during 3D printing: analytical and experimental study

Elkashef, Mohamed / Williams, R. Christopher / Cochran, Eric W.

Physical and chemical characterization of rejuvenated reclaimed asphalt pavement (RAP) binders using rheology testing and pyrolysis gas chromatography-mass spectrometry

Villagrán-Zaccardi, Yury A. / Vollpracht, Anya / Gruyaert, Elke / De Belie, Nele

Recommendation of RILEM TC 238-SCM: determination of the degree of reaction of siliceous fly ash and slag in hydrated cement paste by the selective dissolution method

González-Taboada, Iris / González-Fonteboa, Belén / Martínez-Abella, Fernando / Roussel, Nicolas

Robustness of self-compacting recycled concrete: analysis of sensitivity parameters

Bru, David / Reynau, Ricardo / Baeza, F. Javier / Ivorra, Salvador

Structural damage evaluation of industrial masonry chimneys

Mechtcherine, Viktor / Snoeck, Didier / Schröfl, Christof / De Belie, Nele / Klemm, Agnieszka J. / Ichimiya, Kazuo / Moon, Juhyuk / Wyrzykowski, Mateusz / Lura, Pietro / Toropovs, Nikolajs / Assmann, Alexander / Igarashi, Shin-Ichi / De La Varga, Igor / Almeida, Fernando C. R. / Erk, Kendra / Ribeiro, António Bettencourt / Custódio, João / Reinhardt, Hans Wolf / Falikman, Vyatcheslav

Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: results of a RILEM Round-Robin Test

Graziani, Andrea / Virgili, Amedeo / Cardone, Fabrizio

Testing the bond strength between cold bitumen emulsion composites and aggregate substrate

Park, S. M. / Seo, J. H. / Lee, H. K.

Thermal evolution of hydrates in carbonation-cured Portland cement

Nguyen, Hoang / Rahimi-Aghdam, Saeed / Bažant, Zdeněk P.

Time lag in measuring pore humidity in concrete by a gage in finite cavity

Vrijdaghs, Rutger / di Prisco, Marco / Vandewalle, Lucie

Uniaxial tensile creep of a cracked polypropylene fiber reinforced concrete

Wang, Qiannan / Banthia, Nemkumar / Sun, Wei

Water permeability of repair mortars under an applied compressive stress at early ages

Enjilela, Razieh / Cano-Barrita, Prisciliano F. de J. / Komar, Andrew / Boyd, Andrew J. / Balcom, Bruce J.

Wet front penetration with unsteady state wicking in mortar studied by Magnetic Resonance Imaging (MRI)

Anzeige

Materials and Structures - v. 51, n. 1 (Februar 2018)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Materials and Structures - v. 51, n. 1 (Februar 2018)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.