Materials and Structures - v. 48, n. 4 (April 2015)

Erschienen:	April 2015

Autor(en)	Titel	Seite(n)
Durán-Herrera, A. / Mendoza-Rangel, J. M. / De-Los-Santos, E. U. / Vázquez, F. / Valdez, P. / Bentz, Dale P.	Accelerated and natural carbonation of concretes with internal curing and shrinkage/viscosity modifiers	1207-1214
Luo, H. X. / Liu, X. L.	Advanced unified failure model on uniformly reinforced concrete annular section members	1125-1133
Kumar, Amit / Chauhan, R. P.	Back diffusion correction for radon exhalation rates of common building materials using active measurements	919-928
Kataoka, Marcela Novischi / de Cresce El Debs, Ana Lúcia Homce	Beam–column composite connections under cyclic loading: an experimental study	929-946
Wu, Chengyou / Yu, Hongfa / Zhang, Huifang / Dong, Jinmei / Wen, Jing / Tan, Yongshan	Effects of phosphoric acid and phosphates on magnesium oxysulfate cement	907-917
DeRosa, Danielle / Hoult, Neil A. / Green, Mark F.	Effects of varying temperature on the performance of reinforced concrete	1109-1123
Vona, Marco / Nigro, Domenico	Evaluation of the predictive ability of the in situ concrete strength through core drilling and its effects on the capacity of the RC columns	1043-1059
Martinie, Laetitia / Lataste, Jean-François / Roussel, Nicolas	Fiber orientation during casting of UHPFRC: electrical resistivity measurements, image analysis and numerical simulations	947-957
Ozbakkaloglu, Togay / Louk Fanggi, Butje Alfonsius	FRP–HSC–steel composite columns: behavior under monotonic and cyclic axial compression	1075-1093
Das, Prabir Kumar / Birgisson, Björn / Jelagin, Denis / Kringos, Niki	Investigation of the asphalt mixture morphology influence on its ageing susceptibility	987-1000
van der Vurst, Farid / Caspeele, Robby / Desnerck, Pieter / De Schutter, Geert / Peirs, Jonathan	Modification of existing shape factor models for self-compacting concrete strength by means of Bayesian updating techniques	1163-1176
Wendner, Roman / Hubler, Mija H. / Bažant, Zdeněk P.	Optimization method, choice of form and uncertainty quantification of Model B4 using laboratory and multi-decade bridge databases	771-796
Emdadi, Arezoo / Mehdipour, Iman / Libre, Nicolas Ali / Shekarchi, Mohammad	Optimized workability and mechanical properties of FRCM by using fiber factor approach: theoretical and experimental study	1149-1161
Zhang, Chaofeng / Aoki, Tetsuhiko / Zhang, Qiuju / Wu, Meiping	The performance of low-yield-strength steel shear-panel damper with without buckling	1233-1242
Motamedi, Shervin / Song, Ki-Il / Hashim, Roslan	Prediction of unconfined compressive strength of pulverized fuel ash–cement–sand mixture	1061-1073
Andrade, C. / Climent, M. A. / de Vera, G.	Procedure for calculating the chloride diffusion coefficient and surface concentration from a profile having a maximum beyond the concrete surface	863-869
Somma, Giuliana / Pieretto, Alessandro / Rossetto, Tiziana / Grant, Damian N.	R.C. beam to column connection failure assessment and limit state design	1215-1231
Leung, Christopher K. Y. / Wan, Kai Tai / Inaudi, Daniele / Bao, Xiaoyi / Habel, Wolfgang / Zhou, Zhi / Ou, Jinping / Ghandehari, Masoud / Wu, Hwai Chung / Imai, Michio	Review: optical fiber sensors for civil engineering applications	871-906
Bažant, Zdeněk P.	RILEM draft recommendation: TC-242-MDC multi-decade creep and shrinkage of concrete: material model and structural analysis: Model B4 for creep, drying shrinkage and autogenous shrinkage of normal and high-strength concretes with multi-decade applicability	753-770
Canestrari, Francesco / Belogi, Leonello / Ferrotti, Gilda / Graziani, Andrea	Shear and flexural characterization of grid-reinforced asphalt pavements and relation with field distress evolution	959-975
Olsson, Anders / Källsner, Bo	Shear modulus of structural timber evaluated by means of dynamic excitation and FE analysis	977-985
Mangiafico, S. / Di Benedetto, H. / Sauzéat, C. / Olard, F. / Pouget, S. / Dupriet, S. / Planque, L. / Van Rooijen, R.	Statistical analysis of the influence of RAP and mix composition on viscoelastic and fatigue properties of asphalt mixes	1187-1205
Hubler, Mija H. / Wendner, Roman / Bažant, Zdeněk P.	Statistical justification of Model B4 for drying and autogenous shrinkage of concrete and comparisons to other models	797-814
Wendner, Roman / Hubler, Mija H. / Bažant, Zdeněk P.	Statistical justification of model B4 for multi-decade concrete creep using laboratory and bridge databases and comparisons to other models	815-833
Ranjbar, Malek Mohammad / Mousavi, S. Yasin	Strength and durability assessment of self-compacted lightweight concrete containing expanded polystyrene	1001-1011
Scrivener, Karen L. / Lothenbach, Barbara / De Belie, Nele / Gruyaert, Elke / Skibsted, Jørgen / Snellings, Ruben / Vollpracht, Anya	TC 238-SCM: hydration and microstructure of concrete with SCMs: State of the art on methods to determine degree of reaction of SCMs	835-862
Hailesilassie, Biruk W. / Hean, Sivotha / Partl, Manfred N.	Testing of blister propagation and peeling of orthotropic bituminous waterproofing membranes	1095-1108
Fang, Cheng / Yam, Michael C. H. / Ma, Hongwei / Chung, K. F.	Tests on superelastic Ni–Ti SMA bars under cyclic tension and direct-shear: towards practical recentring connections	1013-1030
da Silva, Wilson Ricardo Leal / Šmilauer, Vít / Štemberk, Petr	Upscaling semi-adiabatic measurements for simulating temperature evolution of mass concrete structures	1031-1041
Beushausen, H. / Burmeister, N.	The use of surface coatings to increase the service life of reinforced concrete structures for durability class XC	1243-1252
Ince, C. / Carter, M. A. / Wilson, M. A.	The water retaining characteristics of lime mortar	1177-1185
Ekblad, Jonas / Lundström, Robert / Simonsen, Erik	Water susceptibility of asphalt mixtures as influenced by hydraulically active fillers	1135-1147

Autor(en)

Titel

Seite(n)

Durán-Herrera, A. / Mendoza-Rangel, J. M. / De-Los-Santos, E. U. / Vázquez, F. / Valdez, P. / Bentz, Dale P.

Accelerated and natural carbonation of concretes with internal curing and shrinkage/viscosity modifiers

1207-1214

Luo, H. X. / Liu, X. L.

Advanced unified failure model on uniformly reinforced concrete annular section members

1125-1133

Kumar, Amit / Chauhan, R. P.

Back diffusion correction for radon exhalation rates of common building materials using active measurements

919-928

Kataoka, Marcela Novischi / de Cresce El Debs, Ana Lúcia Homce

Beam–column composite connections under cyclic loading: an experimental study

929-946

Wu, Chengyou / Yu, Hongfa / Zhang, Huifang / Dong, Jinmei / Wen, Jing / Tan, Yongshan

Effects of phosphoric acid and phosphates on magnesium oxysulfate cement

907-917

DeRosa, Danielle / Hoult, Neil A. / Green, Mark F.

Effects of varying temperature on the performance of reinforced concrete

1109-1123

Vona, Marco / Nigro, Domenico

Evaluation of the predictive ability of the in situ concrete strength through core drilling and its effects on the capacity of the RC columns

1043-1059

Martinie, Laetitia / Lataste, Jean-François / Roussel, Nicolas

Fiber orientation during casting of UHPFRC: electrical resistivity measurements, image analysis and numerical simulations

947-957

Ozbakkaloglu, Togay / Louk Fanggi, Butje Alfonsius

FRP–HSC–steel composite columns: behavior under monotonic and cyclic axial compression

1075-1093

Das, Prabir Kumar / Birgisson, Björn / Jelagin, Denis / Kringos, Niki

Investigation of the asphalt mixture morphology influence on its ageing susceptibility

987-1000

van der Vurst, Farid / Caspeele, Robby / Desnerck, Pieter / De Schutter, Geert / Peirs, Jonathan

Modification of existing shape factor models for self-compacting concrete strength by means of Bayesian updating techniques

1163-1176

Wendner, Roman / Hubler, Mija H. / Bažant, Zdeněk P.

Optimization method, choice of form and uncertainty quantification of Model B4 using laboratory and multi-decade bridge databases

771-796

Emdadi, Arezoo / Mehdipour, Iman / Libre, Nicolas Ali / Shekarchi, Mohammad

Optimized workability and mechanical properties of FRCM by using fiber factor approach: theoretical and experimental study

1149-1161

Zhang, Chaofeng / Aoki, Tetsuhiko / Zhang, Qiuju / Wu, Meiping

The performance of low-yield-strength steel shear-panel damper with without buckling

1233-1242

Motamedi, Shervin / Song, Ki-Il / Hashim, Roslan

Prediction of unconfined compressive strength of pulverized fuel ash–cement–sand mixture

1061-1073

Andrade, C. / Climent, M. A. / de Vera, G.

Procedure for calculating the chloride diffusion coefficient and surface concentration from a profile having a maximum beyond the concrete surface

863-869

Somma, Giuliana / Pieretto, Alessandro / Rossetto, Tiziana / Grant, Damian N.

R.C. beam to column connection failure assessment and limit state design

1215-1231

Leung, Christopher K. Y. / Wan, Kai Tai / Inaudi, Daniele / Bao, Xiaoyi / Habel, Wolfgang / Zhou, Zhi / Ou, Jinping / Ghandehari, Masoud / Wu, Hwai Chung / Imai, Michio

Review: optical fiber sensors for civil engineering applications

871-906

Bažant, Zdeněk P.

RILEM draft recommendation: TC-242-MDC multi-decade creep and shrinkage of concrete: material model and structural analysis: Model B4 for creep, drying shrinkage and autogenous shrinkage of normal and high-strength concretes with multi-decade applicability

753-770

Canestrari, Francesco / Belogi, Leonello / Ferrotti, Gilda / Graziani, Andrea

Shear and flexural characterization of grid-reinforced asphalt pavements and relation with field distress evolution

959-975

Olsson, Anders / Källsner, Bo

Shear modulus of structural timber evaluated by means of dynamic excitation and FE analysis

977-985

Mangiafico, S. / Di Benedetto, H. / Sauzéat, C. / Olard, F. / Pouget, S. / Dupriet, S. / Planque, L. / Van Rooijen, R.