Journal of Constructional Steel Research - August 2021

Erschienen:	August 2021

Autor(en)	Titel	Seite(n)
Gu, Tianyu / Yang, Sen / Guan, Dongzhi / Jia, Liang-Jiu	Analytical model for local bulging failure of mini-BRBs with circular restraint tubes	106722
Chen, Kang / Zhang, Yao / Tan, Kang Hai	Behaviour of steel beam-column joints subjected to quasi-static and impact loads	106721
Unsworth, Daniel / Driver, Robert G. / Li, Leijun / Twizell, Sheldon / Imanpour, Ali	Characterization of residual stresses for LTB simulations of modern welded girders	106769
Chen, Xin / Blum, H. B. / Roy, Krishanu / Pouladi, Pouya / Uzzaman, Asraf / Lim, James B. P.	Cold-formed steel portal frame moment-resisting joints: Behaviour, capacity and design	106718
Kim, Jongseo / Kim, Kyungsik	Compressive strength equations for box-girder flanges stiffened with U-ribs in cable-supported bridges	106702
Wang, Weiyang / Liu, Ye	Concept and performance testing of an all-steel miniature dual stiffness damper	106772
Wang, Hao / Wang, Youde / Zhang, Zongxing / Liu, Xiaogang / Xu, Shanhua	Cyclic behavior and hysteresis model of beam-column joint under salt spray corrosion environment	106737
Kang, Won-Hee / Hicks, Stephen J. / Uy, Brian / Aslani, Farhad	Design resistance of helical seam pipe columns with limited tensile test data	106724
Wang, Haitao / Huo, Jingsi / Elchalakani, Mohamed / Liu, Yanzhi / Zhang, Suqing	Dynamic performance of retrofitted steel beam-column connections subjected to impact loadings	106732
Chen, Ying / Hao, Hong / Chen, Wensu / Cui, Jian / Hao, Yifei / Hua, Chaofeng	Dynamic tensile behaviors of welded steel joint material	106700
Zhao, Baocheng / Lu, Bing / Zeng, Xin / Gu, Qiang	Experimental and numerical study of hysteretic performance of new brace type damper	106717
Tsavdaridis, Konstantinos Daniel / Lau, Chun Kit / Alonso-Rodríguez, Andrés	Experimental behaviour of non-seismical RWS connections with perforated beams under cyclic actions	106756
Lv, Gang / Li, Pengcheng / Zhang, Chenglong / Sun, Xiaojing / Chen, Enzhen	Experimental investigation into the buckling behaviour of cable-stiffened steel columns	106753
Tong, Lewei / Niu, Lichao / Ren, Zhenzhen / Zhao, Xiao-Ling	Experimental research on fatigue performance of high-strength structural steel series	106743
Qiang, Bin / Liu, Xinran / Liu, Yujie / Yao, Changrong / Li, Yadong	Experimental study and parameter determination of cyclic constitutive model for bridge steels	106738
Chiniforush, Alireza A. / Ataei, Abdolreza / Bradford, Mark A.	Experimental study of deconstructable bolt shear connectors subjected to cyclic loading	106741
Yapıcı, Orhan / Theofanous, Marios / Yuan, Huanxin / Skalomenos, Konstantinos / Dirar, Samir	Experimental study of ferritic stainless steel bolted T-stubs under monotonic loading	106761
Wang, Weiyong / Li, Xiang / Al-azzani, Hisham	Experimental study on local buckling of high-strength Q960 steel columns at elevated temperatures	106716
Tu, Bing / Cai, Shunyao / Li, Jia / Liu, Haijun	Fatigue assessment of a full-scale composite box-girder with corrugated-steel-webs and concrete-filled-tubular flange	106768
Che, Hongbo / Tong, Liyuan / Liu, Songyu / Yang, Qiang	Field investigation on the mechanical performance of corrugated steel utility tunnel (CSUT)	106693
Martin, Amory / Deierlein, Gregory G.	Generalized modified modal superposition procedure for seismic design of rocking and pivoting steel spine systems	106745
Zhang, Ziqian / Shi, Gang / Hou, Lintao / Zhou, Le	Geometric dimension and imperfection measurements of box-T section columns using 3D scanning	106742
Wang, Jia / Li, Hong-Nan / Fu, Xing / Li, Qian	Geometric imperfections and ultimate capacity analysis of a steel lattice transmission tower	106734
Zhu, Zhiwen / Li, Jianpeng / Huang, Yan / Carpinteri, Alberto	Hot-spot stress models of cutout detail on orthotropic steel bridge decks	106762
Ding, Fa-xing / Chen, Yang-bo / Wang, Liping / Pan, Zhi-cheng / Li, Cheng-yu / Yuan, Tao / Deng, Chao / Luo, Chen / Yan, Qi-Wu / Liao, Chang-bin	Hysteretic behavior of CFST column-steel beam bolted joints with external reinforcing diaphragm	106729
Ye, Kai / Ozaki, Fuminobu / Knobloch, Markus	Impact fracture energies of cold-formed steel square hollow section in and after fire	106740
Mageirou, G. E. / Lemonis, M. E.	Influence of imperfections on the progressive collapse of steel moment resisting frames	106744
Qing, Yuan / Wang, Chun-Lin / Lin, Xuchuan / Meng, Shaoping	Influence of post-onset stiffness on seismic responses of BRBFs with gap-supported protections	106725
Yan, Jia-Bao / Luo, Yan-Li / Su, Lingfeng / Lin, Xuchuan / Luo, Yun-Biao / Zhang, Lingxin	Low-temperature compression behaviour of square CFST columns using Q960 ultra-high strength steel	106727
Anandavijayan, Satya / Mehmanparast, Ali / Braithwaite, Jarryd / Brennan, Feargal / Chahardehi, Amir	Material pre-straining effects on fatigue behaviour of S355 structural steel	106707
Gao, Yang / Shi, Gang / Wang, Xun	Mechanical properties of low yield point steels subjected to low-cycle structural damage	106733
Horton, Thomas Alexander / Hajirasouliha, Iman / Davison, Buick / Özdemir, Zuhal	More efficient design of reduced beam sections (RBS) for maximum seismic performance	106728
Yazdi, Hamidreza A. / Hashemi, M. Javad / Al-Mahaidi, Riadh / Gad, Emad	Multi-axis testing of concrete-filled steel tube columns forming ductile soft-story in multi-story buildings	106736
Feng, Ran / Chen, Long / Chen, Zhenming / Chen, Boshan / Roy, Krishanu / Lim, James B. P.	Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS	106704
Kong, Zhengyi / Jin, Ya / Yang, Fan / Vu, Quang-Viet / Truong, Viet-Hung / Yu, Bo / Kim, Seung-Eock	Numerical simulation for structural behaviour of stainless steel web cleat connections	106706
Papargyriou, Ioannis / Hajirasouliha, Iman / Becque, Jurgen / Pilakoutas, Kypros	Performance-based assessment of CFS strap-braced stud walls under seismic loading	106731
Shi, Gang / Wang, Shihao / Chen, Xuesen / Rong, Chengxiao	Post-fire mechanical properties of base metal and welds of Q235 steel	106767
Chen, Man-Tai / Pandey, Madhup / Young, Ben	Post-fire residual material properties of cold-formed steel elliptical hollow sections	106723
Padilla-Llano, David A. / Ocel, Justin	Qualification of Electroslag Welds made from HPS 485W (70W) and 345W (50W) Steels	106705
Zhou, Ting / Li, Chongyang / Chen, Zhihua / Chen, Huazhou / Guo, Weiqi / Zhang, Pengfei	Quasi static behavior of specially shaped columns composed of concrete-filled steel tube frame-double steel concrete composite walls	106730
He, Xiuzhang / Ke, Ke / Guo, Lihua / Yam, Michael C. H. / Wang, Zhihui	A replaceable fuse steel-concrete composite connection: Force transfer mechanism and design considerations	106760
Cabrera, Manuela / Tizani, Walid / Ninić, Jelena	A review and analysis of testing and modeling practice of extended Hollo-Bolt blind bolt connections	106763
Guo, Hongchao / Xie, Yong / Tian, JianBo / Kou, Jialiang	Seismic behavior of assembled beam-column joints with C-shaped cantilever section	106766
Wang, Xiaodun / Su, Pengfei / Liu, Jiadi / Zhao, Shilong	Seismic performance of ATLS modular house based on joint stiffness analysis	106770
Zheng, Liang / Ge, Hongwei / Wang, Wen / Gao, Ying	Seismic performance of eccentrically braced frames with low-yield welded hollow spheres	106764
He, Chang / Xie, Qiang / Jiang, Lizhong / Jiang, Liqiang	Seismic terminal displacement of UHV post electrical equipment considering flange rotational stiffness	106701
Yamaguchi, Eiki / Kittaka, Naoto / Maho, Buchit / Sukontasukkul, Piti	Shear lag effect on stress concentration in simply-supported stiffened box girder	106715
Zou, Yuxuan / Zhou, Xuhong / Shi, Yu / Wang, Zhijun / Ke, Ke / Zhang, Zepeng / Guan, Yu	Shear resistance of cold-formed thin-walled steel inter-story connections	106757
Yang, You-Fu / Bie, Xue-Meng / Fu, Feng	Static performance of square CFDST chord to steel SHS brace T-joints	106726
Benfratello, Salvatore / Caddemi, Salvatore / Palizzolo, Luigi / Pantò, Bartolomeo / Rapicavoli, Davide / Vazzano, Santo	Targeted steel frames by means of innovative moment resisting connections	106695
Meng, Xin / Gardner, Leroy	Testing, modelling and design of normal and high strength steel tubular beam-columns	106735
Keränen, Lassi / Kangaspuoskari, Matti / Niskanen, Juhani	Ultrahigh-strength steels at elevated temperatures	106739

Autor(en)

Titel

Seite(n)

Gu, Tianyu / Yang, Sen / Guan, Dongzhi / Jia, Liang-Jiu

Analytical model for local bulging failure of mini-BRBs with circular restraint tubes

106722

Chen, Kang / Zhang, Yao / Tan, Kang Hai

Behaviour of steel beam-column joints subjected to quasi-static and impact loads

106721

Unsworth, Daniel / Driver, Robert G. / Li, Leijun / Twizell, Sheldon / Imanpour, Ali

Characterization of residual stresses for LTB simulations of modern welded girders

106769

Chen, Xin / Blum, H. B. / Roy, Krishanu / Pouladi, Pouya / Uzzaman, Asraf / Lim, James B. P.

Cold-formed steel portal frame moment-resisting joints: Behaviour, capacity and design

106718

Kim, Jongseo / Kim, Kyungsik

Compressive strength equations for box-girder flanges stiffened with U-ribs in cable-supported bridges

106702

Wang, Weiyang / Liu, Ye

Concept and performance testing of an all-steel miniature dual stiffness damper

106772

Wang, Hao / Wang, Youde / Zhang, Zongxing / Liu, Xiaogang / Xu, Shanhua

Cyclic behavior and hysteresis model of beam-column joint under salt spray corrosion environment

106737

Kang, Won-Hee / Hicks, Stephen J. / Uy, Brian / Aslani, Farhad

Design resistance of helical seam pipe columns with limited tensile test data

106724

Wang, Haitao / Huo, Jingsi / Elchalakani, Mohamed / Liu, Yanzhi / Zhang, Suqing

Dynamic performance of retrofitted steel beam-column connections subjected to impact loadings

106732

Chen, Ying / Hao, Hong / Chen, Wensu / Cui, Jian / Hao, Yifei / Hua, Chaofeng

Dynamic tensile behaviors of welded steel joint material

106700

Zhao, Baocheng / Lu, Bing / Zeng, Xin / Gu, Qiang

Experimental and numerical study of hysteretic performance of new brace type damper

106717

Tsavdaridis, Konstantinos Daniel / Lau, Chun Kit / Alonso-Rodríguez, Andrés

Experimental behaviour of non-seismical RWS connections with perforated beams under cyclic actions

106756

Lv, Gang / Li, Pengcheng / Zhang, Chenglong / Sun, Xiaojing / Chen, Enzhen

Experimental investigation into the buckling behaviour of cable-stiffened steel columns

106753

Tong, Lewei / Niu, Lichao / Ren, Zhenzhen / Zhao, Xiao-Ling

Experimental research on fatigue performance of high-strength structural steel series

106743

Qiang, Bin / Liu, Xinran / Liu, Yujie / Yao, Changrong / Li, Yadong

Experimental study and parameter determination of cyclic constitutive model for bridge steels

106738

Chiniforush, Alireza A. / Ataei, Abdolreza / Bradford, Mark A.

Experimental study of deconstructable bolt shear connectors subjected to cyclic loading

106741

Yapıcı, Orhan / Theofanous, Marios / Yuan, Huanxin / Skalomenos, Konstantinos / Dirar, Samir

Experimental study of ferritic stainless steel bolted T-stubs under monotonic loading

106761

Wang, Weiyong / Li, Xiang / Al-azzani, Hisham

Experimental study on local buckling of high-strength Q960 steel columns at elevated temperatures

106716

Tu, Bing / Cai, Shunyao / Li, Jia / Liu, Haijun

Fatigue assessment of a full-scale composite box-girder with corrugated-steel-webs and concrete-filled-tubular flange

106768

Che, Hongbo / Tong, Liyuan / Liu, Songyu / Yang, Qiang

Field investigation on the mechanical performance of corrugated steel utility tunnel (CSUT)

106693

Martin, Amory / Deierlein, Gregory G.

Generalized modified modal superposition procedure for seismic design of rocking and pivoting steel spine systems

106745

Zhang, Ziqian / Shi, Gang / Hou, Lintao / Zhou, Le

Geometric dimension and imperfection measurements of box-T section columns using 3D scanning

106742

Wang, Jia / Li, Hong-Nan / Fu, Xing / Li, Qian

Geometric imperfections and ultimate capacity analysis of a steel lattice transmission tower

106734

Zhu, Zhiwen / Li, Jianpeng / Huang, Yan / Carpinteri, Alberto

Hot-spot stress models of cutout detail on orthotropic steel bridge decks

106762

Ding, Fa-xing / Chen, Yang-bo / Wang, Liping / Pan, Zhi-cheng / Li, Cheng-yu / Yuan, Tao / Deng, Chao / Luo, Chen / Yan, Qi-Wu / Liao, Chang-bin

Hysteretic behavior of CFST column-steel beam bolted joints with external reinforcing diaphragm

106729

Ye, Kai / Ozaki, Fuminobu / Knobloch, Markus

Impact fracture energies of cold-formed steel square hollow section in and after fire

106740

Mageirou, G. E. / Lemonis, M. E.

Influence of imperfections on the progressive collapse of steel moment resisting frames

106744

Qing, Yuan / Wang, Chun-Lin / Lin, Xuchuan / Meng, Shaoping

Influence of post-onset stiffness on seismic responses of BRBFs with gap-supported protections

106725

Yan, Jia-Bao / Luo, Yan-Li / Su, Lingfeng / Lin, Xuchuan / Luo, Yun-Biao / Zhang, Lingxin

Low-temperature compression behaviour of square CFST columns using Q960 ultra-high strength steel

106727

Anandavijayan, Satya / Mehmanparast, Ali / Braithwaite, Jarryd / Brennan, Feargal / Chahardehi, Amir

Material pre-straining effects on fatigue behaviour of S355 structural steel

106707

Gao, Yang / Shi, Gang / Wang, Xun

Mechanical properties of low yield point steels subjected to low-cycle structural damage

106733

Horton, Thomas Alexander / Hajirasouliha, Iman / Davison, Buick / Özdemir, Zuhal

More efficient design of reduced beam sections (RBS) for maximum seismic performance

106728

Yazdi, Hamidreza A. / Hashemi, M. Javad / Al-Mahaidi, Riadh / Gad, Emad

Multi-axis testing of concrete-filled steel tube columns forming ductile soft-story in multi-story buildings

106736

Feng, Ran / Chen, Long / Chen, Zhenming / Chen, Boshan / Roy, Krishanu / Lim, James B. P.

Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS

106704

Kong, Zhengyi / Jin, Ya / Yang, Fan / Vu, Quang-Viet / Truong, Viet-Hung / Yu, Bo / Kim, Seung-Eock

Numerical simulation for structural behaviour of stainless steel web cleat connections

106706

Papargyriou, Ioannis / Hajirasouliha, Iman / Becque, Jurgen / Pilakoutas, Kypros

Performance-based assessment of CFS strap-braced stud walls under seismic loading

106731

Shi, Gang / Wang, Shihao / Chen, Xuesen / Rong, Chengxiao

Post-fire mechanical properties of base metal and welds of Q235 steel

106767

Chen, Man-Tai / Pandey, Madhup / Young, Ben

Post-fire residual material properties of cold-formed steel elliptical hollow sections

106723

Padilla-Llano, David A. / Ocel, Justin

Qualification of Electroslag Welds made from HPS 485W (70W) and 345W (50W) Steels

106705

Zhou, Ting / Li, Chongyang / Chen, Zhihua / Chen, Huazhou / Guo, Weiqi / Zhang, Pengfei

Quasi static behavior of specially shaped columns composed of concrete-filled steel tube frame-double steel concrete composite walls

106730

He, Xiuzhang / Ke, Ke / Guo, Lihua / Yam, Michael C. H. / Wang, Zhihui

A replaceable fuse steel-concrete composite connection: Force transfer mechanism and design considerations

106760

Cabrera, Manuela / Tizani, Walid / Ninić, Jelena

A review and analysis of testing and modeling practice of extended Hollo-Bolt blind bolt connections

106763

Guo, Hongchao / Xie, Yong / Tian, JianBo / Kou, Jialiang

Seismic behavior of assembled beam-column joints with C-shaped cantilever section

106766

Wang, Xiaodun / Su, Pengfei / Liu, Jiadi / Zhao, Shilong

Seismic performance of ATLS modular house based on joint stiffness analysis

106770

Zheng, Liang / Ge, Hongwei / Wang, Wen / Gao, Ying

Seismic performance of eccentrically braced frames with low-yield welded hollow spheres

106764

He, Chang / Xie, Qiang / Jiang, Lizhong / Jiang, Liqiang

Seismic terminal displacement of UHV post electrical equipment considering flange rotational stiffness

106701

Yamaguchi, Eiki / Kittaka, Naoto / Maho, Buchit / Sukontasukkul, Piti

Shear lag effect on stress concentration in simply-supported stiffened box girder

106715

Zou, Yuxuan / Zhou, Xuhong / Shi, Yu / Wang, Zhijun / Ke, Ke / Zhang, Zepeng / Guan, Yu

Shear resistance of cold-formed thin-walled steel inter-story connections

106757

Yang, You-Fu / Bie, Xue-Meng / Fu, Feng

Static performance of square CFDST chord to steel SHS brace T-joints

106726

Benfratello, Salvatore / Caddemi, Salvatore / Palizzolo, Luigi / Pantò, Bartolomeo / Rapicavoli, Davide / Vazzano, Santo

Targeted steel frames by means of innovative moment resisting connections

106695

Meng, Xin / Gardner, Leroy

Testing, modelling and design of normal and high strength steel tubular beam-columns

106735

Keränen, Lassi / Kangaspuoskari, Matti / Niskanen, Juhani

Ultrahigh-strength steels at elevated temperatures

106739

Anzeige

Journal of Constructional Steel Research - August 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Constructional Steel Research - August 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.