Journal of Building Pathology and Rehabilitation - v. 9, n. 1 (November 2023)

Erschienen:	November 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Salgude, Rohit R. / Sawant, Shubham Dilip / Sakhare, Vishakha	Achieving low energy and low CO2 emission through effective application of window to wall ratio and window glass considering orientation
Alani, Aktham H. / Megat Johari, Megat Azmi / Muhamad Bunnori, N. / Majid, T. A.	Application of response surface methodology for optimizing the compressive strength of green ultra high strength concrete using silica fume
Noolu, Venkatesh / Bingi, Navyasri / Chavali, Rama Vara Prasad	Assessing the synergistic effects of GGBS and glass fiber on expansive soil behavior using response surface methodology
Chaudhari, Rahul S. / Bhavsar, Falguni / Pradhan, Pradnya S.	Assessment of moisture and chloride content in wall at different ages of buildings
Patil, Digambar / Kadam, Sachin	Assessment of water pressure on reinforced concrete highway bridge piers by univariate regression analysis approach
Al-Kaabi, Nawras H. / Al-Thairy, Haitham / Abo Dhaheer, M. S.	Behavior of reinforced self- compacting recycled concrete corbels strengthened with NSM GFRP bars
Hussein, Ola Ahmed / Khalid, Nibras Nizar	Behavior of slender RC columns strengthened with partial and full wrapping of BFRP sheet, subjected to variable eccentric loading
Jayadurgalakshmi, M. / Kandasamy, S.	Behaviour of cenosphere and pumice powder as partial cement substitute material in the sustainable production of concrete
Patra, Rakesh Kumar / Mukharjee, Bibhuti Bhusan	Characteristics of concrete containing granulated blast furnace slag: a factorial design approach
Mudragada, Ravi / Bhargava, Pradeep	Derivation of pressure-impulse diagrams for blast-loaded RC members
Ul Hassan, Owais / Kaushik, Pooja / Afsar, S. Shakil / Mehmood, Gauhar	Determination of properties of concrete in its fresh stage for classified quartzite rocks in the Aravalli ranges, New Delhi, India
Bansal, Sunita / Bansal, Prince / Gautam, Lilesh / Vaibhav Sharma, Kul	Development and standardization of sustainable dry mix mortars with supplementary cementitious materials
Harne, Varsha Ravindra / Tripathi, Rajesh Kumar / Guzzarlapudi, Sunny Deol	Effect of extrinsic and intrinsic parameters on fatigue performance of hot mix asphalt mixtures: a review
Gurappa, Dakka / Babu R, Dushyanth V.	The effect of lathe steel scrap in the geopolymer concrete and its durability aspects
Muhd Sidek, Muhd Norhasri / Saman, Hamidah Mohd / Arshad, Mohd Fadzil	The effect of nano engineered material (NEM) in enhancing the engineering properties of ultra high-performance concrete (UHPC)
Alqeisi, Safa / Nahhab, Ali H.	The effect of partial substitution of sand with palm ash on enhancing concrete properties
Singh, Smita / Aswath, M. U. / Tanushree B., S.	Effect of silica on the properties of red mud based geopolymer mortar for synthesis of sustainable bricks
Shakir, Qasim M. / Alghazali, Asmaa F.	Effect of the arching action on the behavior of the RC precast concrete deep beams: comparison between several hybrid models
Yanze, Gaëlle Annick Nyonda / Tiffo, Emmunuel / Nana, Achile / Kamseu, Elie / Chinje, Florence Uphie	Effects of recycled scrap alumina on the physical and mechanical properties of calcium sulfo-aluminate cement products
Divyah, N. / Devasena, M.	Enhanced self-healing of micro-cracks in concrete using graphene oxide encapsulated sodium alginate microcapsules: microstructure, elemental, and oxide composition analysis
Joshi, Sreenivasa Prasad / Ramaswamy, Veljarla / Sohail, Mohammad Abdul Sai	Enhancing frost resistance and durability of self-compacting concrete through basalt fiber reinforcement
Alam, Md. Faiz / Shubham, Kumar / Kumar, Sanjay / Srivastava, Arvind Kumar Lal	Enhancing high-strength self-compacting concrete properties through Nano-silica: analysis and prediction of mechanical strengths
Momeni, Saeed / Eghbalian, Ayda / Talebzadeh, Mohammad / Paksaz, Amirmohammad / Bakhtiarvand, Sajjad Khaki / Shahabi, Shahram	Enhancing office building energy efficiency: neural network-based prediction of energy consumption
Delnavaz, Mohammad / Bechrak, Tahereh / Najari, Sina / Shirgir, Behrooz	Enhancing storm water runoff quality through porous concrete: characteristics, absorption isotherms and statistical analysis
Krishna, Yelisetty Murali / Dhevasenaa, P. R. / Srinivasan, G. / Naga Satish Kumar, Ch.	Enhancing sustainability in concrete: synergistic effects of sugarcane bagasse ash and iron ore tailings as eco-friendly cement and sand replacements
Al-Abbasi, Qasim M. Shakir / Hannon, Hawraa K.	Enhancing the structural performance of the reinforced precast concrete hybrid deep beams based on tied-arch action
Yadav, Jitendra Singh / Saini, Anant / Hussain, Shaik / Sharma, Vaibhav	Estimation of ultimate bearing capacity of circular footing resting on recycled construction and demolition waste overlaying on loose sand
El-Kempshawy, Gehan M. / El-Mahalawy, Medhat S. / Ewais, Ashraf Y. / Kamel, Abdullah M. A. / Marey Mahmoud, Hussein	Evaluating some geopolymer-based mortars for restoration purposes of damaged ancient Egyptian mural paintings
Ersoy, Selahattin	Evaluation of seismic behavior of the cultural heritage buildings in an ancient district of Antakya after the Kahramanmaraş earthquakes (Mw 7.7 and Mw 7.6)
Latha, A. Madhavi / Lingeshwaran, N. / Challagulla, S. P. / Manne, Mounika	Examining random forests for predicting elastic floor response spectra involving dynamic primary-secondary structure interaction
Kadhim, Safa Saib / Kadhim, Mohammed M. / Al-Salim, Nabeel H.	Experimental and numerical study for lightweight R.C beam under flexural and torsion behaviour
Ahmad, Soran Abdrahman / Ahmed, Hemn Unis / Rafiq, Serwan Khwrshid / Gul-Mohammed, Jaza Faiq / Ali Ahmed, Dler / Rostam, Khalan Jalil / Fqi, Kawa Omar	Exploring the influence of waste glass granular replacement on compressive strength in concrete mixtures: a normalization and modeling study
Mesároš, Peter / Chellappa, Vigneshkumar / Spišáková, Marcela / Kaleja, Pavol / Špak, Matej	Factors influencing defects in residential buildings
Rajkohila, A. / Chandar, S. Prakash / Ravichandran, Panruti Thangaraj	Flexural Performance of HSC beams containing natural fibers
Al-Rekabi, Abdullah H. / Abo Dhaheer, M. S.	Flexural performance of sustainable hybrid fibre-reinforced SCC beams made of treated recycled aggregates
Mousavinejad, Seyed Hosein Ghasemzadeh / Pourjamali, Morteza	Flexural strength of concrete beams strengthened with BFRP and GFRP using cement and epoxy adhesives subjected to elevated temperatures
Ahmad, Soran Abdrahman / Saeed, Brwa Hamah / Hussein, Sary Nasr / Ahmed, Hemn Unis / Rafiq, Serwan Khwrshid / Ahmad, Dler Ali / Fqi, Kawa Omar	Impact of substituting coarse aggregate with waste glass granules on the fresh and mechanical properties of pervious concrete: an experimental study
Abd Elfatah, Sahar	Improving the performance of heavy industry concrete floors
Locati, Francisco / Raggiotti, Belén / Murra, Juan / Marfil, Silvina	In-service 80-year-old arch-gravity dam (Córdoba, Argentina): state of concrete conservation and potential development of the alkali-silica reaction
Chaudhari, Abhishek Devidas / Mohod, Jitendra / Suryawanshi, Shiwanand R.	Influence of bearing length of column on performance of deep beam designed by strut-and-tie model
Thakur, Ankur / Kasilingam, Senthil	Influential parameters on the seismic performance of confined masonry – a comprehensive review
Thatikonda, Naresh / Mallik, Mainak / Venkateswara Rao, S. / Madduru, Sri Ram Chand / Rajesh Kumar Dora, T.	Influential studies on microsilica as a potential replacement for fly ash-GGBFS in self-compacting geopolymer concrete: Microstructural insights and performance analysis
Giri, Jyoti Prakash / Priyadarshini, Monalisa	Innovative utilization of waste plastic in paving blocks: a paradigm shift
Siddique, Jawad Akhter / Kumar, Arun / Keryio, Jabir Ali / Keerio, Manthar Ali / Kumar, Rabinder	Investigating the use of calcined clay of Sindh, Pakistan, on mechanical properties and embodied carbon of concrete
Pratap, Bheem / Sharma, Sanjay / Kumari, Pooja / Raj, Sumit	Mechanical properties prediction of metakaolin and fly ash - based geopolymer concrete using SVR
Garcia, Cesar / Onyelowe, Kennedy C. / Valverde Aguirre, Paulina Elizabeth / Ebid, Ahmed M. / Obianyo, Ifeyinwa I. / Zúñiga Rodríguez, María Gabriela / Ubachukwu, Obiekwe A. / Onyia, Michael E. / Moghal, Arif Ali Baig / Stephen, Liberty U.	Multi-objective optimization of the flow condition of binary constituent net-zero concretes towards carbon neutrality-built environment pathway
Suvvari, Siva Gowri Prasad / Kandru, Suresh / Chappa, Madhu	Optimization of cement, rice husk ash, and waste plastic additives for stabilizing expansive subgrade soil: a Grey-Taguchi analysis approach
Kedar, Hrushikesh N. / Aware, Rushikesh / Repale, Gauri / Pankaj, Thakare / Sangale, Prerana	Optimizing industrial waste in road construction: a response surface methodology approach
Selim, Mohamed / metwaly, Mohamed / Elshamy, Eman	Performance of recycling concrete in frames provided with infill walls due to lateral loads
Vengadesh Marshall Raman, J. / Ramasamy, V.	Properties of concrete with dissimilar treated recycled coarse aggregate
Ghodousian, Oveys / Garcia, Reyes / Ghodousian, Amin / Mohammad Nezhad Ayandeh, Mohammad Hossein	Properties of fibre-reinforced self-compacting concrete subjected to prolonged mixing: an experimental and fuzzy logic investigation
Marie, Iqbal / Mujalli, Randa Oqab	Quantifying limestone façade performance: an analysis and ranking using logistic model
de Melo, Sizy Brenda / da Paz, Rosineide Fernando / Mesquita, Esequiel	Recent advances on infrared thermography for ceramic tiles detachments diagnosis: literature review
Biradar, Guruprasad / Ramanna, Nakul / Madduru, Sri Rama Chand	Rehabilitation of fire-affected reinforced concrete flexural members utilizing CFRP and GFRP
Alalikhan, Ahmed A. / Habelalmateen, Mohsen A. / Al-Tameemi, Haider Ali	Retrofitting of the reinforced concrete beams using external tightened steel bars
Patil, Shantharam / Kini, Pradeep G.	A review on simulation based multi-objective optimization of space layout design parameters on building energy performance
Maheshwari, Rohit / Singh, Binay Kumar / Marques, Rui	Seismic assessment of confined masonry against URM and RC-framed buildings on sloping ground in hilly regions: performance-based analysis and application of the Indian code
Thippa, Pavan Kumar / Tripathi, R. K. / Bhat, Govardhan	Seismic assessment of structures with mass and stiffness irregularities under multiple earthquakes
Sanghai, Sanket / Gurmule, Chinmay	Seismic response control of RCC building with plan and vertical irregularities using dampers
Zamba, Duresa Dubale / Mohammed, Tesfaye Alemu	Self-healing performance of normal strength concrete with Bacillus subtilis bacteria
Lakshmish Kumar, Srinidhi / Arunkumar, A. S. / Alex, Jacob / Bhalkikar, Aniket / Hossiney, Nabil	Strengthening of brick masonry using biaxial polypropylene geogrid as confinement reinforcement
Naser, Maryam H. / Naser, Fatimah H. / Almamoori, Ali Hameed Naser / Hussien, Mohammed L. / Dhahir, Mohammed K.	Structural behavior of RC jointed beams using recycled steel fiber and hybrid dowel bars
Abdulkarem, Mais A. / Rasool, Dalia Adil / Nabhan, Baydaa Jaber	A study of the effect of industrial and natural wastes on cement mortar properties
Rasuli, Mohammad Idris / Tajunnisa, Yuyun / Yamamura, Akifumi	A study on flowability, strength and drying shrinkage properties of one-part AAM cured at ambient temperature
Mosheer, Khamail Abdul-Mahdi	Study the effect of the loss in main steel reinforcement of simply supported beams which compensated by precast concrete
Kirthiga, R. / Elavenil, S.	A survey on crack detection in concrete surface using image processing and machine learning
Latupeirissa, Josefine Ernestine / Arrang, Hermin	Sustainability factors of building information modeling (BIM) for a successful construction project management life cycle in Indonesia
Padavala, Siva Shanmukha Anjaneya Babu / Kode, Venkata Ramesh / Dey, Subhashish	Sustainable concrete development towards the eco-friendly construction: Enhancing the strength and durability by using fly ash and silica fume
Simou, Z. / Hamdaoui, S. / Oubenmoh, S. / El Afou, Y. / Babaharra, O. / Mahdaoui, M. / Ait Msaad, A.	Thermal evaluation and optimization of a building heating system: radiant floor coupled with a solar system
Sathiparan, Navaratnarajah / Jeyananthan, Pratheeba	Use of soft computing approaches for the prediction of compressive strength in concrete blends with eggshell powder
Giri, Jyoti Prakash / Priyadarshini, Monalisa	Utilization of building and agriculture wastes in bituminous pavement: a sustainable solution
Neelamegam, Prakhash / Muthusubramanian, Bhuvaneshwari	Utilizing response surface methodology (RSM) to predict the mechanical characteristics of concrete incorporating treated recycled construction and demolition waste aggregate (CDW) and discarded reverse osmosis (RO) membrane

Über diese
Datenseite
IssueID
71603
Veröffentlicht am:
14.01.2024
Geändert am:
14.01.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Building Pathology and Rehabilitation - v. 9, n. 1 (November 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Building Pathology and Rehabilitation - v. 9, n. 1 (November 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.