Journal of Building Pathology and Rehabilitation - v. 8, n. 1 (Oktober 2022)

Erschienen:	Oktober 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Rosas, Marialaura Herrera / Chileno, Nahúm Gamalier Cayo / Campos, Alejandra Araoz / Aquino Rocha, Joaquin Humberto	Analysis of concrete mechanical properties when adding type-E glass fibers
Sharma, Nitisha / Thakur, Mohindra Singh / Upadhya, Ankita / Sihag, Parveen	Assessment of flexural strength of concrete with marble powder applying soft computing techniques
Fideles, Bruna Tayna Macedo / Mesquita, Esequiel / Moreira, Eugênio / Vieira, Mylene Melo	Assessment of metric accuracy on data acquisition using point cloud: an application to the José de Alencar Theater
Serajzadeh, Seyed Adel / Bargi, Khosrow / Malkeshi, Fatemeh	Assessment of slab-column connections with lattice shear reinforcement using damaged plasticity model
Aliu, Abdulmalik Adozuka / Ariff, Nor Rima Muhamad / Ametefe, Divine Senanu / John, Dah	Automatic classification and isolation of cracks on masonry surfaces using deep transfer learning and semantic segmentation
Peykari, Kianoush / Najafgholipour, Mohammad Amir	Behavior of steel beam to built-up box column moment connections with vertically stiffened panel zone
Ushapriya, B. T. / Punitha Kumar, A.	Behaviour of raked column subjected to blast loading
Inojosa, Leonardo da Silveira Pirillo / Vilanova, Kinderman de Araújo	BIM interoperability in the maintenance planning process for existing buildings
Machado, Amanda Moreira Lima / Babadopulos, Lucas Feitosa de Albuquerque Lima / Cabral, Antonio Eduardo Bezerra	Casting plan for a mass concrete foundation of a high-rise building for avoiding DEF and shrinkage cracking
Reddy, K. Chandrasekhar / Hemadri, G.	Characterization of high-strength concrete by Preferential supplant of scrap tyre rubber powder-bambara nut shell ash constituent: utilization of novel waste materials in concrete
Alsulaiman, Batool / Zarkesh, Afsaneh / Yeganeh, Mansour	Choosing a strategy for the reconstruction of residential buildings after the war in terms of physical identity (case study: the city of Homs in Syria)
Romeiro, Thália Raelly de L. M. / Souza, Ana Luiza Rocha de / Lopes, Melissa Lorrane Frazão / Silva, Matheus de Souza / Bauer, Elton	Classifying the severity levels of cracking anomaly on façades
Das, Tushar Kanti / Choudhury, Satyabrata	Developments in the unified performance-based seismic design
Martínez, Guillermo / Jara, José / Olmos, Bertha / Gaytan, Rodolfo	Diagnosis and structural intervention of an old estate hull in the Tarímbaro County, Michoacán
Rodrigues, Bruno Noronha / Favoreti, Ana Laura Fragoso / Borges, Karoline / Gomes, Pedro Henrique / Dionizio, Rafael Fernandes / Menzori, Mauro / Jr Molina, Vitor Eduardo / Dezen-Kempter, Eloisa	Digital survey applied to the assessment of pathological manifestations in the architectural heritage of monte alegre in Piracicaba/SP
Rubens, Tallis / Ribeiro, Gilmário / Paulo, Renan / Bessa, Maycon / Moreira, Eugênio / Vieira, Mylene / Mesquita, Esequiel	Digitalization based on high-resolution scanning and HBIM tools for damage assessment of the José de Alencar house
da Silva Filho, Mauro José / de Souza, Madson Lucas / de Paiva Veras, Vinícius Capistrano / Cabral, Antonio Eduardo Bezerra	Durability analysis of partial replacement of ordinary Portland cement by white glass waste concrete
Salah, Mustafa S. / Muteb, Haitham H.	The effect of cross section type on the performance of different sized bolted shear connectors for composite cold-formed steel beams
Waqar, Ahsan / Bheel, Naraindas / Shafiq, Nasir / Othman, Idris / Khan, Muhammad Basit / Mansoor, Muhammad Shoaib / Benjeddou, Omrane / Yaseen, Ghulam	Effect of volcanic pumice powder ash on the properties of cement concrete using response surface methodology
Saifi, Nadia / Belatrache, Djamel / Dadamoussa, Aicha / Settou, Noureddine	Effects of green roofs and vertical greenery systems on building thermal comfort in dry climates: an experimental study
Matos, Ryan A. / Nascimento Filho, Luis Carlos / Guilhem, Isabela / Freitas, Vytórya / Moura, Jerfson / Mesquita, Esequiel	An electrical modeling approach for analysis of the behavior of carbon nanotubes cement-based composite
Jara, Jose M. / Olmos, Bertha A. / Martínez, Guillermo	Evaluation of degrading hysteresis on RC structures retrofitted with energy dissipating systems
Machado, Marina Araujo / Júnior, Darlan S. Duarte / Freitas, Priscilla V. Galdino / Gonçalves, Vanessa Gomes / Coelho, Vinícius Almeida / Silva, Francisco G. Santos	Evaluation of the structural degradation of a garage in a residential building using the GDE/UnB methodology: a case study
Abbass, Mahapara / Singh, Gyanendra	Experimental investigation of engineered alkali-activated fibrous geopolymer concrete
Garcez, Mônica Regina / Meneghetti, Leila Cristina	Fiber reinforced polymers for historical bridges upgrading: a fatigue life assessment
Al-Thairy, Haitham / Youssef, Anees Jassim	Flexural and shear behaviour of lightweight RC beams strengthened by NSM GFRP bars
Paupério, Esmeralda / Arêde, António / Silva, Rui	Fortresses in Portugal. Conservation and basis for new uses
Malipeddi, Reshma / Adiseshu, S.	Impact of unique mixing methodology on macro and microstructural characteristics of concrete containing slag and fly ash
Lenz, Sheila Karine / Possan, Edna / Passarini, Michel Rodrigo Zambrano / Ghellere, Polyana	Influence of different bacterial strains on cracks self-healing in cement-based matrices with and without incorporated air
Kandasamy, S. / Sarathkumar, T. / Narasimhulu, K. / Kumar, C. L. Mahesh	Influence of permeable formwork on the performance of polypropylene fibre reinforced concrete
Sriram, M. / Sidhaarth, K. R. Aswin	Influence of silica fume and metakaolin on durability properties of hybrid fibers reinforced high strength concrete
Reichert, Thiago Alessi / Balestra, Carlos Eduardo Tino / Balestra, Daniele Alves Oliveira / de Medeiros-Junior, Ronaldo Alves	Laboratory procedure for obtaining chloride profiles from concrete structures cores: a mathematical approach
Barbosa, Maria Teresa / Innocencio, Camila de Rezende / Salzani, Lucca Oliveira / Pereira, Thales da Silva / de Souza, Nelson Luis Gonçalves Dias / de Oliveira, Luiz Fernando Cappa	Lime-based mortars with added silica fume and bioproducts for restoration and preservation of heritage buildings
Diaz, Camilo / Sousa, Israel / Mesquita, Esequiel / Pereira, Luís / Alberto, Nélia / Antunes, Paulo	Low-cost optical interrogator system for structural health monitoring
Sldozian, Rami Joseph Aghajan / Hamad, Ali Jihad / Al-Rawe, Hesham Salim	Mechanical properties of lightweight green concrete including nano calcium carbonate
Kanthe, Vishvanath N. / Deo, Shirish V. / Murmu, Meena	Microstructural study of blended concrete containing multiple admixtures
Rath, Badrinarayan / Agon, Elmer C. / Dereje, Bewiket / Garoma, Shiferaw / Debela, Ayana / Kebede, Kassahun / Yadeta, Regasa	Modification of load carrying capacity model for composite column
Carlos Dos Santos Júnior, José / Manoel Almeida Santos, Joab / Rocha Almeida Santos, Mateus	Parametric modeling using the BIM methodology for the process of pathology identification in buildings
Cadore, Bianca Carlin / Ribeiro, Francisco Roger Carneiro / Modolo, Regina Célia Espinosa / Pacheco, Fernanda	Performance analysis of concrete with repurposed industrial glass waste
Rodrigues, Gustavo Gutierrez de Oliveira / Salamoni, Natália / Rohden, Abrahão Bernardo / Carrara, Guilherme	Physical and mechanical characterization of calcined clays for use as supplementary cementitious material
Pereira, Guilherme / Ribeiro, Francisco Roger Carneiro / Lima, Cristian Jonathan Franco de / Pacheco, Fernanda / Brehm, Feliciane Andrade / Modolo, Regina Célia Espinosa	Production of adhesive mortars with ornamental rock processing sludge and calcium carbonate sludge
dos Santos Alberton, Kétlin / do Nascimento, Carmelita Blodow / Cavalheiro, Regina Brasil / de Oliveira, Valéria Costa / Gonzaga, Lidia Bruna Teles / Pierozan, Rodrigo Cesar	Properties of coconut fiber-reinforced mortars for sustainable solutions
Muñoz, Jonathan Sneyder Penagos / de Souza, Madson Lucas / Barbosa, Ligia Holanda / Araújo, Lucas Benício Rodrigues / Babadopulos, Lucas Feitosa de Albuquerque Lima / Bastos, Juceline Batista dos Santos	Proposition of a methodology for the evaluation of adhesiveness (pull-off test) of aggregate−geopolymer binder interfaces
Roshan, Naeim / Ghalehnovi, Mansour / Pakzad, Seyed Soroush	Recycled steel fiber for fiber reinforced concrete production: fresh and hardened properties, cost, and ecological assessments
Shakir, Qasim M. / Alsaheb, Sarah D. Abd / Farsangi, Ehsan Noroozinejad	Rehabilitation of deteriorated reinforced self-consolidating concrete brackets and corbels using CFRP composites: diagnosis and treatment
Sinha, Arnab Kumar / Talukdar, Sudip	Repairing of web opened RC beam with ferrocement laminates using alkali activated mortar
Pandit, Tekkan / Chaulagain, Hemchandra	Response of reinforced concrete structures designed before and after 2015 Nepal earthquake
Gayathiri, K. / Praveenkumar, S.	Retaining the Particle packing approach and its application in developing the cement composites towards sustainability
Dhakal, Shweta / Chaulagain, Hemchandra	Seismic behaviour of plan irregular reinforced concrete buildings considering soil effects
Martínez, Guillermo / Jara, José / Olmos, Bertha / Sánchez, Adrià	Seismic damage indices for the San Miguel Charo Ex-Convent in Michoacán, México
Nejati, Faezeh / Pouraminian, Majid / Zhian, Milad / Ashkevary, Mojtaba	Seismic performance of vertical link beam equipped with absorbing plates for creating rocking motion and directing damage
Salah, Mustafa S. / Muteb, Haitham H. / Hamad, Mays A.	The structural behavior of composite cold-formed steel beam-to-column joints with different connection shapes
Stein, Kássio Joe / Graeff, Angela Gaio / Garcez, Mônica Regina	Structural performance of reinforced concrete beams subjected to combined effects of corrosion and cyclic loading
Chary, Konnoju Saikumar / Munilakshmi, Nijagala	Study of the Morphological Characteristics of Geopolymer concrete based on Eggshell and Bauxite powder
Zareei, Sayed Alireza / Al-Thairy, Haitham / Sallal, Ali Kadhim	Study the flexural behavior of ferrocement flat panels
Reichert, Thiago Alessi / Balestra, Carlos Eduardo Tino / Pansera, Wagner Alessandro / Balestra, Daniele Alves Oliveira / Savaris, Gustavo	Theoretical model of correlation between ductility, degree of corrosion, and critical diameter of reinforcing bars under natural degradation
Vidal, Alexandre / Machado, Amanda / Babadopulos, Lucas / Magalhães, Raquel	Thermal modeling and monitoring of massive concrete foundations to prevent pathological manifestations
Adari, S. K. / Urmila, P. / Bharathi, K. P. P.	Thermal properties of conductive concrete using graphite powder and steel fibers
Campos, Alejandra Araoz / Yanarico, Mariela Cori / Dávalos, Adriana Karen Fernández / Aruquipa, Yessica Jhoseth Flores / Quispe, Milenka Daniela Alvarez / Aquino Rocha, Joaquin Humberto	Traditional earth construction: case study of the community of Rodeo Alto, Cochabamba-Bolivia
Vieira, Mylene / Ribeiro, Gilmário / Alves, Karina / Barbosa, José Ermerson / Isidoro, Henrique / Martins, Thiago / Magalhães, Brendda Karen / Almeida, Francisco Emerson / Moreira, Eugênio / Mesquita, Esequiel	Updating the documentation of a historic building: a case study of the José de Alencar theatre

Über diese
Datenseite
IssueID
68647
Veröffentlicht am:
10.12.2022
Geändert am:
10.12.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Building Pathology and Rehabilitation - v. 8, n. 1 (Oktober 2022)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Building Pathology and Rehabilitation - v. 8, n. 1 (Oktober 2022)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.