Journal of Building Engineering - Dezember 2021

Erschienen:	Dezember 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Cuevas, Karla / Chougan, Mehdi / Martin, Falk / Ghaffar, Seyed Hamidreza / Stephan, Dietmar / Sikora, Pawel	3D printable lightweight cementitious composites with incorporated waste glass aggregates and expanded microspheres – rheological, thermal and mechanical properties	102718
Santos, Pedro / Sousa, Laura / Godinho, Luís / Correia, João R. / Dias, A. M. P. G.	Acoustic and thermal behaviour of cross-insulated timber panels	103309
Lin, Sen / Zhang, Genbao / Sun, Junbo / He, Shilin / Chen, Changfu / Morsy, Amr M. / Wang, Xiangyu	Acoustic performance optimization of a cementitious composite with a porous medium	103362
Salerno, Ilaria / Anjos, Miguel F. / McKinnon, Kenneth / Gómez-Herrera, Juan A.	Adaptable energy management system for smart buildings	102748
Sun, Fei-Fei / Yang, Jia-qi / Wang, Meng / Wu, Tan-Ye	An adaptive viscous damping wall for seismic protection: Experimental study and performance-based design	102645
Kukk, Villu / Bella, Adeniyi / Kers, Jaan / Kalamees, Targo	Airtightness of cross-laminated timber envelopes: Influence of moisture content, indoor humidity, orientation, and assembly	102610
Souza, Tacila B. / Lima, Victor M. E. / Araújo, Fernanda W. C. / Miranda, Leonardo F. R. / Melo Neto, Antonio A.	Alkali-activated slag cellular concrete with expanded polystyrene (EPS) – physical, mechanical, and mineralogical properties	103387
Romero, M. J. / Aguilar, F. / Vicente, P. G.	Analysis of design improvements for thermal bridges formed by double-brick façades and intermediate slabs for nZEB residential buildings in Spain	103270
Dominici, Laura / Fleck, Robert / Gill, Raissa L. / Pettit, Thomas J. / Irga, Peter J. / Comino, Elena / Torpy, Fraser R.	Analysis of lighting conditions of indoor living walls: Effects on CO2 removal	102961
Martín-del-Río, J. J. / Canivell, J. / Torres-González, Marta / Mascort-Albea, E. J. / Romero-Hernández, R. / Alducin-Ochoa, J. M. / Alejandre-Sánchez, F. J.	Analysis of the materials and state of conservation of the medieval rammed earth walls of Seville (Spain)	103381
Hendiger, Jacek / Chludzińska, Marta / Ziętek, Piotr	Analysis of variable air volume unit pressure sensor factors with specific reference to measurement of low air velocity	103321
Sun, Tingting / Luo, Zhiwen / Chay, Tim	An analytical model to predict the temperature in subway-tunnels by coupling thermal mass and ventilation	102564
Lei, Haoran / Li, Le / Yang, Wei / Bian, Yadong / Li, Chun-Qing	An analytical review on application of life cycle assessment in circular economy for built environment	103374
Alam, Morshed / Devjani, Maisum Raza	Analyzing energy consumption patterns of an educational building through data mining	103385
Touma, Albert Al / Ouahrani, Djamel	The Application of Control Algorithm for Optimal Performance of Evaporatively-cooled Façade System in Hot Dry and Humid Weathers	102642
Abioye, Sofiat O. / Oyedele, Lukumon O. / Akanbi, Lukman / Ajayi, Anuoluwapo / Davila Delgado, Juan Manuel / Bilal, Muhammad / Akinade, Olugbenga O. / Ahmed, Ashraf	Artificial intelligence in the construction industry: A review of present status, opportunities and future challenges	103299
Hosseinian, S. Mahdi / Faghani, Mohammadreza	Assessing the effect of structural parameters and building site in achieving low carbon building materialization using a life-cycle assessment approach	103318
Vigna, Ilaria / Lollini, Roberto / Pernetti, Roberta	Assessing the energy flexibility of building clusters under different forcing factors	102888
Albertini, Felipe / Gomes, Luciana Paulo / Grondona, Atilio Efrain Bica / Caetano, Marcelo Oliveira	Assessment of environmental performance in building construction sites: Data envelopment analysis and Tobit model approach	102994
Martínez-García, Carolina / González-Fonteboa, Belén / Carro-López, Diego / Pérez-Ordóñez, Juan Luis	Assessment of mussel shells building solutions: A real-scale application	102635
Wang, Tao / Wang, Xuetong / Wang, Liang / Au-Yong, Cheong Peng / Ali, Azlan Shah	Assessment of the development level of regional industrialized building based on cloud model: A case study in Guangzhou, China	102547
Hwang, Seung-Hyeon / Yang, Keun-Hyeok / Choi, Yong-Soo / Kwon, Seung-Jun	Axial and flexural performances of columns restored after severe damage	102686
Qiao, Qiyun / Li, Jiafeng / Mou, Ben / Cao, Wanlin	Axial compressive behavior of reinforced concrete-filled stainless steel tube (RCFSST) stub columns: Experimental research	103431
Gao, Shan / Guo, Lanhui / Tian, Jun / Li, Xuejie	Behavior of circular bimetallic tube-confined concrete stubs under eccentric compression	103402
Ahmad, Habil / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Behavior of GFRP bar-reinforced hollow-core polypropylene fiber and glass fiber concrete columns under axial compression	103245
Ercan, Emre / Hökelekli, Emin / Arisoy, Bengi	Behavior of precast composite columns under axial and transverse forces	103262
Aejaz, S. A. / Dar, M. Adil / Dar, A. R. / Bhat, J. A. / Carvalho, Hermes	Behaviour of various framed timber joints: Capacity and improved design rules	103417
Su, Tengxiang / Li, Haijiang / An, Yi	A BIM and Machine Learning Integration Framework for Automated Property Valuation	102636
Vitrone, Federica / Ramos, Diego / Ferrando, Francesc / Salvadó, Joan	Binderless Fiberboards for Sustainable Construction. Materials, Production Methods and Applications	102625
Gong, Wei / Chen, Qi / Miao, Jijun	Bond behaviors between copper slag concrete and corroded steel bar after exposure to high temperature	103312
Liang, Chenjiyu / Nan, Shuo / Shao, Xiaoliang / Li, Xianting	Calculation method for air resistance coefficient of vehicles in tunnel with different traffic conditions	102971
Hung, Chung-Chan / Kuo, Chia-Wei / Shao, Yi	Cast-in-place and prefabricated UHPC jackets for retrofitting shear-deficient RC columns with different axial load levels	103305
Drozdzol, Krzysztof	CFD thermal analysis of a three-layer chimney used in residential buildings	102665
Lai, Shaoxiong / Zhao, Yujie / Fan, Yifan / Ge, Jian	Characteristics of daytime land surface temperature in wind corridor: A case study of a hot summer and warm winter city	103370
Zahiri, Zohreh / Laefer, Debra F. / Gowen, Aoife	Characterizing building materials using multispectral imagery and LiDAR intensity data	102603
Sumesh, Mathialagan / Alengaram, U. Johnson / Jumaat, Mohd Zamin / Mo, Kim Hung / Singh, Ramesh / Nayaka, Ramappa Ramesh / Srinivas, Karthick	Chemo-physico-mechanical characteristics of high-strength alkali-activated mortar containing non-traditional supplementary cementitious materials	103368
Sereewatthanawut, Issara / Pansuk, Withit / Pheinsusom, Phoonsak / Prasittisopin, Lapyote	Chloride-induced corrosion of a galvanized steel-embedded calcium sulfoaluminate stucco system	103376
Qian, Yuchong / Leng, Jiawei	CIM-based modeling and simulating technology roadmap for maintaining and managing Chinese rural traditional residential dwellings	103248
Norouzi, Masoud / Chàfer, Marta / Cabeza, Luisa F. / Jiménez, Laureano / Boer, Dieter	Circular economy in the building and construction sector: A scientific evolution analysis	102704
Heracleous, C. / Michael, A. / Savvides, A. / Hayles, C.	Climate change resilience of school premises in Cyprus: An examination of retrofit approaches and their implications on thermal and energy performance	103358
Mazza, Fabio	Combination of different types of damped braces for two-level seismic control of rc framed buildings	103268
Nematzadeh, Mahdi / Hosseini, Seyyed-Asgar / Ozbakkaloglu, Togay	The combined effect of crumb rubber aggregates and steel fibers on shear behavior of GFRP bar-reinforced high-strength concrete beams	102981
Abushanab, Abdelrahman / Alnahhal, Wael	Combined effects of treated domestic wastewater, fly ash, and calcium nitrite toward concrete sustainability	103240
Juan, Yu-Hsuan / Wen, Chih-Yung / Li, Zhengtong / Yang, An-Shik	A combined framework of integrating optimized half-open spaces into buildings and an application to a realistic case study on urban ventilation and air pollutant dispersion	102975
Cho, Hye Un / Nam, Yujin / Choi, Eun Ji / Choi, Young Jae / Kim, Hongkyo / Bae, Sangmu / Moon, Jin Woo	Comparative analysis of the optimized ANN, SVM, and tree ensemble models using Bayesian optimization for predicting GSHP COP	103411
Villalón Fornés, Ignacio / Vaičiukynienė, Danutė / Nizevičienė, Dalia / Doroševas, Viktoras / Michalik, Bogusław	A comparative assessment of the suitability of phosphogypsum from different origins to be utilised as the binding material of construction products	102995
Hasan, Javeriya / Fung, Alan S. / Horvat, Miljana	A comparative evaluation on the case for the implementation of building integrated photovoltaic/thermal (BIPV/T) air based systems on a typical mid-rise commercial building in canadian cities	103325
Salek Faramarzi, Mohammadreza / Taghikhany, Touraj	A comparative performance-based seismic assessment of strongback steel braced frames	102983
Meiyan, Hang / Minghui, Jiang / Wenlei, Zhao / Yubin, Yang / Teng, Cheng / Hao, Wang	Composite salt corrosion deterioration characteristics and damage calculation models of concrete incorporated with corrosion inhibiting admixtures	103221
Nasrollahzadeh, Nasrollah	Comprehensive building envelope optimization: Improving energy, daylight, and thermal comfort performance of the dwelling unit	103418
Mou, Ben / Zhou, Yang / Qiao, Qiyun / Liu, Jiming	Compressive behavior of bolted built-up steel columns fabricated using angle section columns	103260
Nalon, Gustavo Henrique / Alves, Marcelo Arruda / Pedroti, Leonardo Gonçalves / Ribeiro, José Carlos Lopes / Hilarino Fernandes, Wellington Emílio / de Oliveira, Diôgo Silva	Compressive strength, dynamic, and static modulus of cement-lime laying mortars obtained from samples of various geometries	102626
Zakir, Mohammad / Sofi, Fayaz A. / Naqash, Javed A.	Compressive testing and finite element analysis-based confined concrete model for stiffened square FRP-concrete-steel double-skin tubular columns	103267
Kildashti, Kamyar / Alinoori, Farnaz / Moshiri, Farzad / Samali, Bijan	Computational simulation of light timber framing connections strengthened with self-tapping screws	103003
Liu, Ye / Wang, Weiyang	Concept and analysis of a low-cost energy dissipater with partially self-centering mechanism	102881
Ascione, Fabrizio / Bianco, Nicola / Iovane, Teresa / Mastellone, Margherita / Mauro, Gerardo Maria	Conceptualization, development and validation of EMAR: a user-friendly tool for accurate energy simulations of residential buildings via few numerical inputs	102647
Le Minh, Hoang- / Khatir, Samir / Abdel Wahab, Magd / Cuong-Le, Thanh	A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads	103239
Gorji Azandariani, Mojtaba / Ghanbari-Ghazijahani, Tohid / Mohebkhah, Amin / Classen, Martin	Concrete- and timber-filled tubes under axial compression – Numerical and theoretical study	103231
Carrillo, Julian / Rodríguez, Daniela / Villar-Salinas, Sergio	Contribution of CFRP to the shear strength of retrofitted lightly-reinforced concrete panels	102722
Machado, Natália / Morioka, Sandra Naomi	Contributions of modularity to the circular economy: A systematic review of literature	103322
Wei, Dong / Zuo, Ming-Xin / Yu, Juan	Control strategy for energy saving of refrigerating station systems in public buildings	103198
Yao, Gangfeng / Xiong, Xueyu / Ge, Yipeng	Cracking behavior of full-scale pre-tensioned prestressed concrete double-Tee members with steel-wire meshes	102658
Saoud, Assaad / Harajli, Hassan / Manneh, Rima	Cradle-to-grave life cycle assessment of an air to water heat pump: Case study for the Lebanese context and comparison with solar and conventional electric water heaters for residential application	103253
Ling, Tzen-Ying / Yen, Nick / Lin, Chun-Hua / Chandra, William	Critical thinking in the urban living habitat: Attributes criteria and typo-morphological exploration of modularity design	103278
Waseem, Shakeel Ahmad / Thakur, Namrata / Islam, Shahid Ul / Kumar, Maneek / Saini, Jaswinder Singh	Cupola slag as partial replacement of fine aggregate in concrete – An experimental study	103343
Ting, Matthew Zhi Yeon / Wong, Kwong Soon / Rahman, Muhammad Ekhlasur / Selowara Joo, Meheron	Cyclic compressive behavior of limestone and silicomanganese slag concrete subjected to sulphate attack and wetting-drying action in marine environment	103357
Darula, Stanislav / Mohelnikova, Jitka / Král, Jakub	Daylight in buildings based on tubular light guides	102608
Al Shboul, Khalid W. / Raheem, Mustafa M. / Rasheed, Hayder A.	Debonding characterization for all-lightweight RC T-Beams strengthened in flexure with FRP	103377
Tam, Vivian W. Y. / Soomro, Mahfooz / Evangelista, Ana Catarina Jorge / Haddad, Assed	Deformation and permeability of recycled aggregate concrete - A comprehensive review	103393
Chen, Yanhua / Wang, Qingjun / Lei, Jianping / Liu, Qizhen / He, Wei / Liu, Songyu / Xia, Xuhui / Liu, Weipin	Design and engineering application of medical oxygen supply system in novel coronavirus pneumonia treatment hospital	103170
Vaz-Serra, Paulo / Wasim, Muhammad / Egglestone, Shannon	Design for manufacture and assembly: A case study for a prefabricated bathroom wet wall panel	102849
Mazzotti, Claudio / Buratti, Nicola	A design oriented fibre-based model for simulating the long-term behaviour of RC beams: Application to beams cast in different stages	103176
Hao, Wei / Chen, Kai / Yan, Yalin	Design wind loads for local flexible cladding of structures based on wind tunnel tests	103154
Amin Ranjbar, Alireza / Ansari, Ramin / Taherkhani, Roohollah / Hosseini, M. Reza	Developing a novel cash flow risk analysis framework for construction projects based on 5D BIM	103341
Hayatdavoodi, Aliakbar / Dehghani, Ayoub / Aslani, Farhad / Nateghi-Alahi, Fariborz	The development of a novel analytical model to design composite steel plate shear walls under eccentric shear	103281
Xu, Zhao-Dong / Dong, Yao-Rong / Wang, Jun-Jian / Guo, Ying-Qing / Chen, Shi / Pan, Peng	Development of electric actuator hybrid test system and experimental study on viscoelastic damping structures	102941
Kim, Hyemi / Sumiyoshi, Daisuke / Choi, Youngjin	Development of flow rate and equipment simulation model for commercial building HVAC&R system by data-driven method	103303
Kim, Min-Jae / Choi, Hong-Joon / Shin, Wonsik / Oh, Taekgeun / Yoo, Doo-Yeol	Development of impact resistant high-strength strain-hardening cementitious composites (HS-SHCC) superior to reactive powder concrete (RPC) under flexure	102652
Erbs, Alexandre / Nagalli, André / Carvalho, Karina Querne de / Mazer, Wellington / Moraes Erbs, Marcia de / Paz, Diogo H. F. / Lafayette, Kalinny P. V.	Development of plasterboard sheets exclusively from waste	102524
Li, Mingkai / Wong, Billy C. L. / Liu, Yuhan / Chan, Chun Man / Gan, Vincent J. L. / Cheng, Jack C. P.	DfMA-oriented design optimization for steel reinforcement using BIM and hybrid metaheuristic algorithms	103310
Aliyu, Aliyu M. / Singh, Dharminder / Uzoka, Chino / Mishra, Rakesh	Dispersion of virus-laden droplets in ventilated rooms: Effect of homemade facemasks	102933
Li, Desheng / Chen, Bing / Xue, Ke / Li, Anyuan / Zheng, Hao / Zhang, Mingli	Durability and mechanical performance of pure/chelated superabsorbent polymer (SAP/SAPC) added mortar in cold region	102982
Xiao, Shu-Hua / Liao, Sheng-Jin / Zhong, Gen-Quan / Guo, Yong-Chang / Lin, Jia-Xiang / Xie, Zhi-hong / Song, Ying	Dynamic properties of PVA short fiber reinforced low-calcium fly ash - slag geopolymer under an SHPB impact load	103220
Zhang, Jia-le / Wang, Zi-ming / Yao, Yu-han / Tang, Rui-feng / Li, Song-tao / Liu, Xiao / Sun, Da-wei	The effect and mechanism of C–S–H-PCE nanocomposites on the early strength of mortar under different water-to-cement ratio	103360
Sivasakthi, M. / Jeyalakshmi, R. / Rajamane, N. P.	Effect of change in the silica modulus of sodium silicate solution on the microstructure of fly ash geopolymers	102939
Sonmez, Merve / Ilcan, Huseyin / Dundar, Burak / Yıldırım, Gürkan / Erşan, Yusuf Çağatay / Şahmaran, Mustafa	The effect of chemical- versus microbial-induced calcium carbonate mineralization on the enhancement of fine recycled concrete aggregate: A comparative study	103316
Guo, Rui / Xue, Jianyang / Qi, Liangjie / Deng, Lei	Effect of column root connections on the dynamic behavior of Chuandou-style timber structures	103340
Hammat, Sihem / Menadi, Belkacem / Kenai, Said / Thomas, Carlos / Kirgiz, Mehmet Serkan / de Sousa Galdino, Andre Gustavo	The effect of content and fineness of natural pozzolana on the rheological, mechanical, and durability properties of self-compacting mortar	103276
Kükrer, Ergin / Eskin, Nurdil	Effect of design and operational strategies on thermal comfort and productivity in a multipurpose school building	102697
Bhattacharya, Arup / Ghahramani, Ali / Mousavi, Ehsan	The effect of door opening on air-mixing in a positively pressurized room: Implications for operating room air management during the COVID outbreak	102900
Orton, Sarah L. / Jawdhari, Aamer / Tian, Ying	Effect of Dynamic Load Redistribution in Reinforced Concrete Flat-Plate Structures Under Collapse	102688
Fernandes, Bruno / Carré, Hélène / Mindeguia, Jean-Christophe / Perlot, Céline / La Borderie, Christian	Effect of elevated temperatures on concrete made with recycled concrete aggregates - An overview	103235
Espinosa, Eduardo / Tarrés, Quim / Theng, Dyna / Delgado-Aguilar, Marc / Rodriguez, Alejandro / Mutjé, Pere	Effect of enzymatic treatment (endo-glucanases) of fiber and mechanical lignocellulose nanofibers addition on physical and mechanical properties of binderless high-density fiberboards made from wheat straw	103392
Jiang, Demin / Jiang, Di / Lv, Shuchen / Cui, Suping / Sun, Shiguo / Song, Xiaoruan / He, Shiqin / Zhang, Jingzong	Effect of flame-retardant rice straw fibers on properties of fiber cement-based composites at high temperatures	102923
Qian, Kai / Cheng, Jian-Fei / Weng, Yun-Hao / Fu, Feng	Effect of loading methods on progressive collapse behavior of RC beam-slab substructures under corner column removal scenario	103258
Kabeer, K. I. Syed Ahmed / Bisht, Kunal / Saravanan, T. Jothi / Vyas, Ashok Kumar	Effect of marble slurry on the microstructure of cement mortars subjected to salt crystallization and alternate wetting and drying cycles	103342
Wang, Yingying / Fan, Ying / Wang, Dengjia / Liu, Yanfeng / Liu, Jiaping	The effect of moisture transfer on the inner surface thermal performance and the thermal transmittance of the roof-wall corner building node in high-temperature and high-humidity areas	102949
Gaibor, Norma / Leitão, Dinis / Miranda, Tiago / Cristelo, Nuno / Pereira, Eduardo N. B. / Cunha, Vítor M. C. F.	Effect of polyacrylonitrile fiber on the properties of alkali-activated ceramic/slag-based mortar	103367
Homaei, Farshad / Mashhadi, Sima	The effect of pulse-like ground motion on the performance-based confidence level of setback special steel moment-resisting frames	103327
Panek, Rafał / Szeląg, Maciej / Franus, Wojciech	Effect of the MCM-41 mesoporous silica on the microstructure and performance of cement matrix	103421
Mo, Yunjeong / Zhao, Dong	Effective factors for residential building energy modeling using feature engineering	102891
Zingre, Kishor T. / Kumar, D. E. V. S. Kiran / Wan, Man Pun / Chao, Christopher Y. H.	Effective R-value approach to comprehend the essence of integrated opaque passive substrate properties	102865
Batool, Farnaz / Islam, Kamrul / Cakiroglu, Celal / Shahriar, Anjuman	Effectiveness of wood waste sawdust to produce medium- to low-strength concrete materials	103237
Gnanachelvam, Sayilacksha / Ariyanayagam, Anthony / Mahendran, Mahen	Effects of insulation materials and their location on the fire resistance of LSF walls	103323
Srivaro, Suthon / Leelatanon, Satjapan / Setkit, Monthian / Matan, Nirundorn / Khongtong, Sureurg / Jantawee, Sataporn / Tomad, Jaipet	Effects of manufacturing parameters on properties of rubberwood-cross laminated timber manufactured via hot pressing	102703
Gao, Danying / Wang, Feihu	Effects of recycled fine aggregate and steel fiber on compressive and splitting tensile properties of concrete	102631
Koç, Sena Göknur / Maçka Kalfa, Sibel	The effects of shading devices on office building energy performance in Mediterranean climate regions	102653
Nguyen, Hoang D. / Shin, Myoungsu	Effects of soil–structure interaction on seismic performance of a low-rise R/C moment frame considering material uncertainties	102713
Pozo-Antonio, J. S. / Dionísio, A. / Vázquez, C.	Effects of staining agents on an ornamental granite	102700
Du, Wei / Liu, Quantao / Lin, Runsheng	Effects of toluene-di-isocyanate microcapsules on the frost resistance and self-repairing capability of concrete under freeze-thaw cycles	102880
Pozo-Antonio, J. S. / Alonso-Villar, E. M. / Rivas, T.	Efficacy of mechanical procedures for removal of a lichen and a gypsum black crust from granite	102986
Naderi, Mahmood / Rahbari, Roza	Efficiency of coating layers used for harsh environmental conditions protection of CFRP-strengthened concrete	102892
Quagliarini, Enrico / Gregorini, Benedetta / D'Orazio, Marco	An empirical failure model to predict biofouling growth on fired bricks due to microalgae	102965
Bruno, Agostino Walter	An empirical model for predicting the effect of stabilisation on the stress-strain behaviour of compressed earth materials	102980
Chaouch, Haithem / Çeken, Celal / Arı, Seçkin	Energy management of HVAC systems in smart buildings by using fuzzy logic and M2M communication	102606
Saikia, Pranaynil / Rakshit, Dibakar / Narayanaswamy, Ramesh / Wang, Fujen	Energy performance and indoor airflow analysis of a healthcare ward designed with resource conservation objectives	103296
Perera, Dilini / Upasiri, I. R. / Poologanathan, K. / Gatheeshgar, P. / Sherlock, P. / Hewavitharana, Thathsarani / Suntharalingam, Thadshajini	Energy performance of fire rated LSF walls under UK climate conditions	103293
Emil, Fady / Diab, Aya	Energy rationalization for an educational building in Egypt: Towards a zero energy building	103247
Jian, Ge / Senmiao, Li / Shuqin, Chen / Ziling, Jiang / Cheng, Shen	Energy-efficiency strategies of residential envelope in China's HSCW zone based on intermittent thermal regulation behaviour	103028
Thiam, Moussa / Fall, Mamadou	Engineering properties of a building material with melted plastic waste as the only binder	102684
Le, Huy Viet / Kim, Min Kyoung / Uk KIM, Seon / Sang-Yeop, C. H. U. N. G. / Kim, Dong joo	Enhancing self-stress sensing ability of smart ultra-high performance concretes under compression by using nano functional fillers	102717
Lv, Jing / Zhu, Mengya / Xu, Haodong / Wang, Lihui / Zhou, Bo	The entransy analysis in the wet channel of dew point evaporative cooler	103371
Darvish, Pouya / Alengaram, U. Johnson / Alnahhal, Ahmed Mahmoud / Poh, Yap Soon / Ibrahim, Shaliza	Enunciation of size effect of sustainable palm oil clinker sand on the characteristics of cement and geopolymer mortars	103335
Ramagiri, Kruthi Kiran / Kar, Arkamitra	Environmental impact assessment of alkali-activated mortar with waste precursors and activators	103391
Andersons, J. / Modniks, J. / Kirpluks, M.	Estimation of the effective diffusivity of blowing agents in closed-cell low-density polyurethane foams based on thermal aging data	103365
Srinivas M, Karthick / Alengaram, U. Johnson / Ibrahim, Shaliza / Phang, Siew Moi / Vello, Vejeysri / Jun, Hew Kai / Alnahhal, Ahmed Mahmoud	Evaluation of crack healing potential of cement mortar incorporated with blue-green microalgae	102958
Borsaikia, Arun Chandra / Dutta, Anjan / Deb, S. K.	Evaluation of participation of masonry infill walls in the linear and nonlinear behaviour of RC buildings with open ground storey	103263
Borujerdi, Ali Soleimani / Mostofinejad, Davood / Hwang, Hyeon-Jong / Salimian, Mohammad Sadegh	Evaluation of structural performance for beam-column joints with high-strength materials under cyclic loading using PIV technique	103283
Smolana, Aneta / Klemczak, Barbara / Azenha, Miguel / Schlicke, Dirk	Experiences and analysis of the construction process of mass foundation slabs aimed at reducing the risk of early age cracks	102947
Shirani, Arsalan / Merzkirch, Alexander / Roesler, Jennifer / Leyer, Stephan / Scholzen, Frank / Maas, Stefan	Experimental and analytical evaluation of exhaust air heat pumps in ventilation-based heating systems	102638
Yang, Jingjie / Liu, Jiepeng / Wang, Shang / Wang, Weiyong	Experimental and analytical investigation on fire resistance of circular tubed steel reinforced concrete medium-long columns	102968
Du, Hao / Hu, Xiamin / Xie, Zhong / Meng, Yanfei	Experimental and analytical investigation on fire resistance of glulam-concrete composite beams	103244
Gajjar, Pratik N. / Gabrielli, Elena / Martin-Alarcon, Dafne Carolina / Pereira, João M. / Lourenço, Paulo B. / Colla, Camilla	An experimental and numerical contribution for understanding the in-situ shear behaviour of unreinforced masonry	103389
Luat, Nguyen-Vu / Shin, Jiuk / Park, Ji-Hun / Lee, Kihak	Experimental and numerical investigation on seismic performance of retrofitted RC columns with web direct/indirect bonding external H-section	103404
Zhang, Chao / Huang, Weiyuan / Zhou, Yun / Luo, Weili	Experimental and numerical investigation on seismic performance of retrofitted RC frame with sector lead viscoelastic damper	103218
Ezoddin, Alireza / Kheyroddin, Ali / Gholhaki, Majid	Experimental and numerical investigation on the seismic retrofit of RC frames with linked column frame systems	102956
shao, Feng / Wang, Yanshang / Lian, Wu / Benjeddou, Omrane	Experimental and numerical investigation on withdrawal connectors usage for lateral resistance of timber shear walls structure	103266
Hua, Jianmin / Wang, Fei / Wang, Neng / Huang, Lepeng / Hai, Letian / Li, Yanwen / Zhu, Xiaohuan / Xue, Xuanyi	Experimental and numerical investigations on corroded stainless-clad bimetallic steel bar with artificial damage	102779
Shi, Tingwei / Zhang, Xihong / Hao, Hong / Xie, Guanyu	Experimental and numerical studies of the shear resistance capacities of interlocking blocks	103230
Yu, Yujie / Tian, Peifeng / Man, Mengke / Chen, Zhihua / Jiang, Lizhong / Wei, Biao	Experimental and numerical studies on the fire-resistance behaviors of critical walls and columns in modular steel buildings	102964
Du, Qiang / Jin, Liangwei / Lv, Jing / Cai, Changlu / Zhang, Runnan	Experimental and numerical studies on the thermal performance of structural insulated panel splines	103334
Qi, Jianan / Cheng, Zhao / Zhou, Kai / Zhu, Yutong / Wang, Jingquan / Bao, Yi	Experimental and theoretical investigations of UHPC-NC composite slabs subjected to punching shear-flexural failure	102662
Segura, Jorge / Bernat, Ernest / Mendizábal, Virginia / Pelà, Luca / Roca, Pere / Gil, Lluís	Experimental comparison of two testing setups for characterizing the shear mechanical properties of masonry	103277
Zhou, Yan / Zheng, Shansuo / Chen, Liuzhuo / Long, Li / Wang, Bin	Experimental investigation into the seismic behavior of squat reinforced concrete walls subjected to acid rain erosion	102899
Mahdi, Ali Hammoodi / Ali Aljubury, Issam M.	Experimental Investigation of Two-Stage Evaporative Cooler Powered by Photovoltaic Panels Using Underground Water	102679
Dai, Kuang-Yu / Lu, Da-Gang / Yu, Xiao-Hui	Experimental investigation on the seismic performance of corroded reinforced concrete columns designed with low and high axial load ratios	102615
Sharma, Ankit / Mishra, Kirti Bhushan	Experimental investigations on the influence of ‘chimney-effect’ on fire response of rainscreen façades in high-rise buildings	103257
He, Lianjie / Gao, Jun / Chen, Jie / Zeng, Lingjie / Zhang, Chengquan / Zhang, Mingyang / Xu, Yanmei / Guo, Hongguang	Experimental studies of natural make-up air distribution in residential kitchen	102911
Du, Bin / Cheng, Qiangqiang / Miao, Leigang / Wang, Junqiang / Bai, Haibo	Experimental study on influence of wetting-drying cycle on dynamic fracture and energy dissipation of red-sandstone	102619
Ma, Fudong / Deng, Mingke / Yang, Yong	Experimental study on internal precast beam–column ultra-high-performance concrete connection and shear capacity of its joint	103204
Xu, Chunyi / Nehdi, Moncef L. / Wang, Kaile / Guo, Yuyuan	Experimental study on seismic behavior of novel AAC prefabricated panel walls	103390
Feng, Xin / Xiao, Hongbin / Chen, Bowang	Experimental study on splitting strength of sawn lumber loaded perpendicular to grain by bolted steel-wood-steel connections	102554
Tian, Guohua / Lv, Henglin / Huang, Jianen / Liu, Peng / Feng, Wei	Experimental study on the heat transfer characteristics of different walls with phase change materials in summer	103354
Saeidi, Sanaz / Rentala, Girish / Rizzuto, Tracey / Hong, Tianzhen / Johannsen, Neil / Zhu, Yimin	Exploring thermal state in mixed immersive virtual environments	102918
Demirdöğen, G. / Işık, Z. / Arayici, Y.	Facility management information taxonomy framework for queries in healthcare buildings	102510
Liu, Wei / Ikago, Kohju	Feasibility study of the physical implementation of rate-independent linear damping for the protection of low-frequency structures	103319
Dezhampanah, Soudabeh / Nikbin, Iman M. / Mehdipour, Sadegh / Mohebbi, Reza / Moghadam, HamidHabibi	Fiber- reinforced concrete containing nano - TiO2 as a new gamma-ray radiation shielding materials	102542
Ren, Pengfei / Hou, Xiaomeng / Cui, Zhongqian / Xie, Hengyan / Abid, Muhammad	Fire resistance evaluation and minimum reinforcement ratio for hybrid fibre-reinforced RPC beams under fire exposure	103216
Mazumder, Ram Krishna / Rana, Sohel / Salman, Abdullahi M.	First level seismic risk assessment of old unreinforced masonry (URM) using fuzzy synthetic evaluation	103162
Zhou, Tianmin / Wang, Jiaji / Sawab, Jamshaid / Chen, Hongbing / Mo, Y. L.	Formulation and calibration of two-dimensional constitutive models for composite structures based on panel tests	103225
Li, Shaoyong / Wei, Mingsong / Wei, Yeru / Wu, Zongli / Han, Xilian / Yang, Rongxia	A fractional order PID controller using MACOA for indoor temperature in air-conditioning room	103295
Gholami Rostam, Mehdi / Abbasi, Alireza	A framework for identifying the appropriate quantitative indicators to objectively optimize the building energy consumption considering sustainability and resilience aspects	102974
Liu, Jiadi / Chen, Zhihua / Liu, Yang / Bai, Yu / Zhong, Xu	Full-scale corner-supported modular steel structures with vertical inter-module connections under cyclic loading	103269
Ayoub, Mohammed / Allam, Amr S.	GeneRT: A Generative Raytracing Tool for the Rapid Approximation of Internal Luminous Conditions	102711
Pawluczuk, Edyta / Kalinowska-Wichrowska, Katarzyna / Jiménez, José Ramón / Fernández-Rodríguez, José María / Suescum-Morales, David	Geopolymer concrete with treated recycled aggregates: Macro and microstructural behavior	103317
Gravina, Rebecca J. / Xie, Tianyu / Bennett, Bree / Visintin, Phillip	HDPE and PET as Aggregate Replacement in Concrete: Life-cycle assessment, Material Development and a case study	103329
Cao, Shuanghua / Li, Xin / Yang, Bing	Heat and Moisture Transfer of Building Envelopes under Dynamic and Steady-state Operation Mode of Indoor Air Conditioning	102683
Hernández-López, I. / Vázquez-Beltrán, E. / Xamán, J. / Chávez, Y. / Hinojosa, J. F. / Noh-Pat, F.	Heating potential prediction of a trombe wall system under temperate climate conditions of Mexico: Case of Cwa-Cwb Köppen classification	103308
Li, Yin / Bonyadi, Nima / Papakyriakou, Ashleigh / Lee, Bruno	A hierarchical decomposition approach for multi-level building design optimization	103272
Cubukcuoglu, Cemre / Nourian, Pirouz / Tasgetiren, M. Fatih / Sariyildiz, I. Sevil / Azadi, Shervin	Hospital layout design renovation as a Quadratic Assignment Problem with geodesic distances	102952
Kim, Jinwoo / Chi, Seokho / Ahn, Changbum Ryan	Hybrid kinematic–visual sensing approach for activity recognition of construction equipment	102709
Ghobadi, Mohammad Soheil / Shams, Amir Sina	A hybrid self-centering building toward seismic resilient structures: Design procedure and fragility analysis	103261
Wang, Z. / Park, Solmoi / Khalid, Hammad R. / Lee, H. K.	Hydration properties of alkali-activated fly ash/slag binders modified by MgO with different reactivity	103252
Özdemir, Anıl / Kopraman, Yağmur / Anil, Özgür	Hysteretic behavior of retrofitted RC shear wall with different damage levels by using steel strips	103394
Liang, Chaofeng / Xiao, Jianzhuang / Wang, Chunhui / Ma, Zhiming	Hysteretic energy and damping variation of recycled aggregate concrete with different cyclic compression loading levels	102936
Mohamed, Sara / Al-Khatri, Hanan / Calautit, John / Omer, Siddig / Riffat, Saffa	The impact of a passive wall combining natural ventilation and evaporative cooling on schools’ thermal conditions in a hot climate	102624
Pouyan, Amir Ehsan / Ghanbaran, Abdulhamid / Shakibamanesh, Amir	" Impact of circulation complexity on hospital wayfinding behavior (Case study: Milad 1000-bed hospital, Tehran, Iran)"	102931
AL-Ameeri, Abbas S. / Rafiq, M. Imran / Tsioulou, Ourania / Rybdylova, Oyuna	Impact of climate change on the carbonation in concrete due to Carbon Dioxide ingress: Experimental Investigation and Modelling	102594
Farhan, Khatib Zada / Megat Johari, Megat Azmi / Demirboğa, Ramazan	Impact of fiber reinforcements on properties of geopolymer composites: A review	102628
Mohamed-Amine, Kenai / Laurent, Libessart / Stéphane, Lassue / Didier, Defer	Impact of green walls occultation on energy balance: Development of a TRNSYS model on a brick masonry house	102634
Ahmed, Sara / Al-Dawood, Zahraa / Abed, Farid / Mannan, Mohammad Abdul / Al-Samarai, Mufid	Impact of using different materials, curing regimes, and mixing procedures on compressive strength of reactive powder concrete - A review	103238
Ma, Jinghui / Yang, Yizhen / Zheng, Xu / Dai, Bobin / Zhu, Dong / Liu, Qi	Impact on heat storage performance of concrete radiant floor with finned water supply pipes	103351
Li, Lingyan / Wang, Yao / Wang, Mengmeng / Hu, Wei / Sun, Yongkai	Impacts of multiple factors on energy consumption of aging residential buildings based on a system dynamics model--Taking Northwest China as an example	102595
Guo, Bingbing / Qiao, Guofu / Li, Zhenming / Li, Dongsheng / Dai, Jinghui / Wang, Yan	Impressed current cathodic protection of chloride-contaminated RC structures with cracking: A numerical study	102943
Nadeem, Muhammad / Ahmed, Furqan / Ul Haq, Ehsan / Zain-ul-Abdein, Muhammad / Raza, Ali / Afzal, Umair / Bibi, Saima / Deen, Zeehsan Siraj	Improved compressive strength and fracture toughness analysis of natural soil based geopolymer	103241
Ling, Jihong / Dai, Na / Xing, Jincheng / Tong, Hui	An improved input variable selection method of the data-driven model for building heating load prediction	103255
Idrees, Maria / Saeed, Farhan / Amin, Abreeza / Hussain, Tousif	Improvement in Compressive Strength of Styrene-Butadiene-Rubber (SBR) Modified Mortars by Using Powder Form and Nanoparticles	102651
Karami, Fereshteh / Izadpanah, Mehdi	Incremental inelastic dynamic damage analysis of MRRCFs infilled with masonry panels	103282
Homayoonmehr, Reza / Ramezanianpour, Ali Akbar / Mirdarsoltany, Mohammadamin	Influence of metakaolin on fresh properties, mechanical properties and corrosion resistance of concrete and its sustainability issues: A review	103011
Tian, Panpan / Qiu, Hongxing / Wang, Huiyu	Influence of shrinkage cracks on the mechanical properties of bolted-type glulam joint with slotted-in steel plate: Experimental study	102632
Werner-Juszczuk, Anna Justyna	The influence of the thickness of an aluminium radiant sheet on the performance of the lightweight floor heating	102896
He, Yan / Liu, Shuhua / Zhang, Xiong / Liu, Wenbin / Liao, Gaoyu / Xu, Mingfeng	Influence of triethanolamine on mechanical strength and hydration performance of blended cement containing fly ash, limestone and slag	102879
Yang, Huashan / Che, Yujun / Shi, Mengyuan	Influences of calcium carbonate nanoparticles on the workability and strength of 3D printing cementitious materials containing limestone powder	102976
Liu, Kai / Wu, Chengqing / Li, Xibing / Liu, Jian / Tao, Ming / Fang, Jianguang / Xu, Shenchun	The influences of cooling regimes on fire resistance of ultra-high performance concrete under static-dynamic coupled loads	103336
Gao, Xiaoming / Jali, Zakiah Mat / Abdul Aziz, A. R. / Hizaddin, Hanee F. / Buthiyappan, Archina / Jewaratnam, Jegalakshimi / Bello, Mustapha M.	Inherent health oriented design for preventing sick building syndrome during planning stage	103285
Abdel daiem, Mahmoud M. / Rashad, Alaa M. / Said, Noha / Abdel-Gawwad, Hamdy A.	An initial study about the effect of activated carbon nano-sheets from residual biomass of olive trees pellets on the properties of alkali-activated slag pastes	102661
Santos, Michael M. / Diez, Maria A. / Suárez, Marta / Centeno, Teresa A.	Innovative particleboard material from the organic fraction of municipal solid waste	103375
Izaddoost, Ali / Naderpajouh, Nader / Heravi, Gholamreza	Integrating resilience into asset management of infrastructure systems with a focus on building facilities	103304
Hatır, M. Ergün / Ince, İsmail / Korkanç, Mustafa	Intelligent detection of deterioration in cultural stone heritage	102690
Seo, Joonho / Kim, Seonhyeok / Jang, Daeik / Kim, Hayeon / Lee, H. K.	Internal carbonation of belite-rich Portland cement: An in-depth observation at the interaction of the belite phase with sodium bicarbonate	102907
Yong, Xin / Wang, Zhongmin / Li, Xiaolei / Fan, Bo	Internal force analysis of the resistance unit of frame-truss composite wall	103307
Hadavi, Mohammad / Pasdarshahri, Hadi	Investigating effects of urban configuration and density on urban climate and building systems energy consumption	102710
Meet, Sompura / Trishna, Choudhury / Naveen, Kwatra	Investigating the nonlinear performance of corroded reinforced concrete beams	102640
Chan, Lok Shun	Investigating the thermal performance and Overall Thermal Transfer Value (OTTV) of air-conditioned buildings under the effect of adjacent shading against solar radiation	103211
Peng, Ting / Zhang, Yuchun / Jiang, Xiangyang / Yang, Yanping / Fang, Zhaosong / Zheng, Zhimin	Investigation of pregnant women thermal comfort in the waiting area of the hospital in South China, Guangzhou	103254
Zhu, Yu / Zhang, Zhaocai	Investigation of the anticorrosion layer of reinforced steel based on graphene oxide in simulated concrete pore solution with 3 wt.% NaCl	103302
Boussaba, Lisa / Lefebvre, Gilles	Investigation of White Vaseline as an alternative Phase Change Material for Thermal Regulation of Physiological Birth Rooms	102669
Keshavarzian, Farhad / Saberian, Mohammad / Li, Jie	Investigation on mechanical properties of steel fiber reinforced reactive powder concrete containing nano-SiO2: An experimental and analytical study	102601
Sonkar, Chanchal / Bhattacharyya, Sriman Kumar / Mittal, Achal Kumar	Investigations on cold-formed steel wall panels with different sheathing boards under axial loading: Experimental and analytical/semi-analytical studies	102924
Gooding, Luke / Erdogan, Bilge	Involving end users in retrofit of higher education buildings	102633
Zhang, Chi / Li, Angui / Guo, Jinnan / Li, Haimeng / Che, Jigang / Li, Jiaxing / Xiong, Jing / Zhang, Xiaoya	Jet noise reduction of spherical tuyeres with serrated trailing edges	103324
He, Jialuo / Shi, Xianming	Laboratory assessment of a self-healing system for early-age durability benefits to cementitious composites	102602
Peeters, M. / Compernolle, T. / Van Passel, S.	Leasing out unused meeting room capacity to reduce future office space needs: A case study of The Hague, Netherlands	102953
Wang, Yixin / Rasheed, Rizwan / Jiang, Fatang / Rizwan, Asfra / Javed, Hajra / Su, Yuehong / Riffat, Saffa	Life cycle assessment of a novel biomass-based aerogel material for building insulation	102988
Valencia-Barba, Yovanna Elena / Gomez-Soberon, Jose Manuel / Gómez-Soberón, María Consolación / Rojas-Valencia, María Neftalí	Life cycle assessment of interior partition walls: Comparison between functionality requirements and best environmental performance	102978
Zona, Renato / Ferla, Paolo / Minutolo, Vincenzo	Limit analysis of conical and parabolic domes based on semi-analytical solution	103271
Martins, Ricardo / do Carmo, Ricardo / Costa, Hugo / Júlio, Eduardo	Load bearing capacity of connections between innovative pre-walls designed to have high durability and eco-efficiency	103356
Cao, Jixing / Zhao, Yang / Liu, Yingyang / Lu, Hongyi / Wang, Wenhua	Load-carrying capacity analysis of traditional Chinese Dou-gong joints under monotonic vertical and reversal lateral loading	102847
Korsavi, Sepideh S. / Jones, Rory V. / Bilverstone, Peter A. / Fuertes, Alba	A longitudinal assessment of the energy and carbon performance of a Passivhaus university building in the UK	103353
Szlachetka, Olga / Witkowska-Dobrev, Joanna / Baryła, Anna / Dohojda, Marek	Low-density polyethylene (LDPE) building films – Tensile properties and surface morphology	103386
Veeger, M. / Ottelé, M. / Prieto, A.	Making bioreceptive concrete: Formulation and testing of bioreceptive concrete mixtures	102545
Chu, S. H. / Kong, Y. K.	Mathematical model for strength of alkali-activated materials	103189
Souza, Jônatas Macêdo de / Ramos Filho, Ricardo Eugênio Barbosa / Duarte, João Batista / Silva, Vamberto Monteiro da / Rêgo, Sóstenes Rodrigues do / Lucena, Luciana de Figueiredo Lopes / Acchar, Wilson	Mechanical and durability properties of compressed stabilized earth brick produced with cassava wastewater	103290
Abushanab, Abdelrahman / Alnahhal, Wael / Sohail, Muazzam Ghous / Alnuaimi, Nasser / Kahraman, Ramazan / Altayeh, Nezam	Mechanical and durability properties of ultra-high performance steel FRC made with discarded materials	103264
Wang, Mingming / Ou, Tong / Xin, Zhiyong / Wang, Dayang / Zhang, Yongshan	Mechanical behavior and fatigue failure analysis of standing seam aluminum alloy roof system under temperature effect	103001
Yang, Xiao / Xu, Li / Pan, Jinlong	Mechanical behavior of full-scale composite steel plate shear wall restrained by ECC panels	102864
Li, Xiaopeng / Zhao, Jun / Zhang, Xiangcheng	A mechanical bond model for reinforcing bar in concrete subjected to monotonic and reversed cyclic loading	102912
van den Heever, Marchant / Bester, Frederick / Kruger, Jacques / van Zijl, Gideon	Mechanical characterisation for numerical simulation of extrusion-based 3D concrete printing	102944
Xu, Li / Pan, Jinlong / Yang, Xiao	Mechanical performance of self-stressing CFST columns under uniaxial compression	103366
Feng, Hu / Shaukat, Ahmed Jawad / Rin, David / Zhang, Pu / Gao, Danying / Sheikh, M. Neaz	Mechanical properties of high-ductility magnesium phosphate cement composite cured at low temperatures	103275
Liu, Hongbo / Du, Peng / Chen, Zhihua / Xu, Feng	Mechanical properties of T-plate stiffened gusset joints for aluminum alloy single layer two-way grid shells	103249
Liu, Zhengyu / Ni, Wen / Li, Ying / Ba, Haojing / Li, Ning / Ju, Yongjian / Zhao, Ben / Jia, Guoliang / Hu, Wentao	The mechanism of hydration reaction of granulated blast furnace slag-steel slag-refining slag-desulfurization gypsum-based clinker-free cementitious materials	103289
Klemp, S. / Abida, A. / Richter, P.	A method and analysis of predicting building material U-value ranges through geometrical pattern clustering	103243
Galbiati, Giuseppe / Medici, Fortunato / Graf, Franz / Marino, Giulia	Methodology for energy retrofitting of Modern Architecture. The case study of the Olivetti office building in the UNESCO site of Ivrea	103378
Yu, Shiwei / Xia, Ming / Sanjayan, Jay / Yang, Lin / Xiao, Jianzhuang / Du, Hongjian	Microstructural characterization of 3D printed concrete	102948
Bucon, Robert / Czarnigowska, Agata	A model to support long-term building maintenance planning for multifamily housing	103000
Huang, Sen / Zuo, Wangda / Vrabie, Draguna / Xu, Rong	Modelica-based system modeling for studying control-related faults in chiller plants and boiler plants serving large office buildings	102654
Norouziasl, Seddigheh / Jafari, Amirhosein / Zhu, Yimin	Modeling and simulation of energy-related human-building interaction: A systematic review	102928
Wei, Yang / Miao, Kunting / Zhang, Xi / Zhou, Yongfeng / Zheng, Kaiqi	Modeling for complete stress-strain curve of circular concrete columns confined with steel spiral and FRP	103294
Wang, Richard / Lam, Chor Man / Alvarado, Valeria / Hsu, Shu-Chien	A modeling framework to examine photovoltaic rooftop peak shaving with varying roof availability: A case of office building in Hong Kong	103349
Han, Sang Whan / Lee, Chang Seok / Cho, Eun Seon	Modeling parameters and acceptable plastic chord rotations for diagonally reinforced concrete coupling beams	102650
Abed, Fayadh M. / Zaidan, Maki H. / Hasanuzzaman, M. / Kumar, L. / Jasim, Abdullah K.	Modelling and experimental performance investigation of a transpired solar collector and underground heat exchanger assisted hybrid evaporative cooling system	102620
Pan, Wei / Wang, Zhen / Zhang, Yang	Module equivalent frame method for structural design of concrete high-rise modular buildings	103214
Yang, Bin / Zhu, Haitao / Wüchner, Roland / Zhang, Qilin	Monitoring of wind effects on a wind-sensitive hybrid structure with single-layer cable-net curtain walls under Typhoon Muifa	102960
Morales, Michele F. D. / Passuello, Ana / Kirchheim, Ana Paula / Ries, Robert J.	Monte Carlo parameters in modeling service life: Influence on life-cycle assessment	103232
Ma, Kunlin / Huang, Xinyu / Shen, Jingtao / Hu, Mingwen / Long, Guangcheng / Xie, Youjun / Zeng, Xiaohui / Xu, Zhanjun / Zhang, Weizheng	The morphological characteristics of brick-concrete recycled coarse aggregate based on the digital image processing technique	103292
Zou, Yukai / Lou, Siwei / Xia, Dawei / Lun, Isaac Y. F. / Yin, Jun	Multi-objective building design optimization considering the effects of long-term climate change	102904
Sun, Junbo / Wang, Xiangyu / Zhang, Junfei / Xiao, Fan / Sun, Yuantian / Ren, Zhenhua / Zhang, Genbao / Liu, Shukui / Wang, Yufei	Multi-objective optimisation of a graphite-slag conductive composite applying a BAS-SVR based model	103223
Hajabdollahi, Zahra / Shafiey Dehaj, Mohammad / Fu, Pei-Fang	Multi-objective teaching-learning-based optimization of combined commercial fuel cells for electricity production	102643
Abavisani, Iman / Rezaifar, Omid / Kheyroddin, Ali	Multifunctional properties of shape memory materials in civil engineering applications: A state-of-the-art review	102657
Hu, Xiaochun / Sun, Zhiqiang	Nano CaAlCO3-layered double hydroxide-doped intumescent fire-retardant coating for mitigating wood fire hazards	102987
Cielo, Daryl / Subiantoro, Alison	Net zero energy buildings in New Zealand: Challenges and potentials reviewed against legislative, climatic, technological, and economic factors	102970
Elsanadedy, Hussein M.	New moment-resisting beam-column joints to increase progressive collapse resistance of precast concrete buildings	102884
Qiao, Wentao / Wang, Zexiong / Wang, Dong / Zhang, Long	A new mortise and tenon timber structure and its automatic construction system	103369
Ye, Jinjun / Ai, Zhengtao / Zhang, Chen	A new possible route of airborne transmission caused by the use of a physical partition	103420
Sadat-Mohammadi, Milad / Shakerian, Shahrad / Liu, Yizhi / Asadi, Somayeh / Jebelli, Houtan	Non-invasive physical demand assessment using wearable respiration sensor and random forest classifier	103279
Wang, Jia-Ji / Liu, Cheng / Nie, Xin / Fan, Jian-Sheng / Zhu, Ying-Jie	Nonlinear model updating algorithm for biaxial reinforced concrete constitutive models of shear walls	103215
Kaloni, Smita / Singh, Ghanapriya / Tiwari, Prashant	Nonparametric damage detection and localization model of framed civil structure based on local gravitation clustering analysis	103339
Huang, Lin / Deng, Lianhua / Li, Angui / Gao, Ran / Zhang, Linhua / Lei, Wenjun	A novel approach for solar greenhouse air temperature and heating load prediction based on Laplace transform	102682
Malekipour, Mohammad / Moodi, Faramarz	A novel approach to improve quality of delivered concrete using slump estimations of the ready-mixed concrete (RMC) truck mixer	103361
Doğan, Bahadır / Ozturk, M. Mete / Tosun, Tuğba / Tosun, Mert / Erbay, L. Berrin	A novel condenser with offset strip fins on a mini channel flat tube for reducing the energy consumption of a household refrigerator	102932
Yan, Xiuying / Guan, Ting / Fan, Kaixing / Sun, Qing	Novel double layer BiLSTM minor soft fault detection for sensors in air-conditioning system with KPCA reducing dimensions	102950
Uygunoğlu, Tayfun / Şimşek, Barış / Ceran, Özge Bildi / Eryeşil, Özge	Novel Hybrid Fiber Reinforced Mortar Production Using Polyvinyl Alcohol with a Blend of Graphene Oxide and Silver Nanoparticles	102641
Huang, Yuan / Tao, Yuxuan / Yi, Weijian / Zhou, Yun / Deng, Lu	Numerical investigation on compressive arch action of prestressed concrete beam-column assemblies against progressive collapse	102991
Feng, Chengdong / Gu, Ming	Numerical simulation of wind veering effects on square-section super high-rise buildings under various wind directions	102954
Karki, Dheeraj / Far, Harry / Saleh, Ali	Numerical studies into factors affecting structural behaviour of composite cold-formed steel and timber flooring systems	102692
Tan, Zheng / Zhong, Wei-hui / Tian, Li-min / Zheng, Yu-hui / Meng, Bao / Duan, Shi-chao	Numerical study on collapse-resistant performance of multi-story composite frames under a column removal scenario	102957
Amoushahi Khouzani, Mohsen / Zeynalian, Mehran / Hashemi, Mahmoud / Mostofinejad, Davood / Farahbod, Farhang / Shahadifar, Mohsen	A numerical study on flexural behavior of biaxial voided slabs containing steel cages	103382
Kim, Han-Soo	Obtaining interaction diagram of concrete section exposed to fire by mathematical optimization	102993
Luo, Qiming / Huang, Lepeng / Xue, Xuanyi / Chen, Zengshun / Zhou, Fengbin / Wei, Lihao / Hua, Jianmin	Occupational health risk assessment based on dust exposure during earthwork construction	103186
Khalilian, Marzieh / Shakib, Hamzeh / Basim, Mohammad Ch.	On the optimal performance-based seismic design objective for steel moment resisting frames based on life cycle cost	103091
Cristelo, Nuno / Garcia-Lodeiro, Inés / Rivera, Jhonathan Fernando / Miranda, Tiago / Palomo, Angel / Coelho, João / Fernández-Jiménez, Ana	One-part hybrid cements from fly ash and electric arc furnace slag activated by sodium sulphate or sodium chloride	103298
Gonçalves, Márcio / Serra, Catarina / Simões, Nuno / Flores-Colen, Inês / Kokolsky, Carolin / Sprengard, Christoph	Onsite monitoring of a wall retrofitted with an external vacuum insulation composite system	103301
Su, Xing / Huang, Yixiang / Wang, Lei / Tian, Shaochen / Luo, Yanping	Operating optimization of air-conditioning water system in a subway station using data mining and dynamic system models	103379
Zhu, Neng / Liu, Xiangzhe / Dong, Qi / Rodriguez, Dragan	Optimization of zero-energy building by multi-criteria optimization method: A case study	102969
Mergos, Panagiotis E.	Optimum design of 3D reinforced concrete building frames with the flower pollination algorithm	102935
Djerouni, Salah / Abdeddaim, Mahdi / Elias, Said / Rupakhety, Rajesh	Optimum Double Mass Tuned Damper Inerter for Control of Structure Subjected to ground motions	103259
Hung Anh, Le Duong / Pásztory, Zoltán	An overview of factors influencing thermal conductivity of building insulation materials	102604
Onat, Onur / Pantò, Bartolomeo	Parametric nonlinear static analysis of a RC structure with TLCW exposed to bidirectional earthquake load by using different modelling methodologies	103395
Khan, M. K. I. / Lee, C. K. / Zhang, Y. X.	Parametric study on high strength ECC-CES composite columns under axial compression	102883
Bhabhor, K. K. / Jani, D. B.	Performance analysis of desiccant dehumidifier with different channel geometry using CFD	103021
Reddy, Jagannath / Roy, Sujit / Das, Biplab	Performance evaluation of sand coated absorber based solar air collector	102973
Wang, Zhihua / Li, Guichen / Wang, Fenghao / Zhang, Yujia	Performance investigation of a transcritical CO2 heat pump combined with the terminal of radiator and floor radiant coil for space heating in different climates, China	102927
Wang, Chongyang / Peng, Hongtao / Bian, Libo / Yin, Hao / Sofi, Massoud / Song, Zihao / Zhou, Zhiyuan	Performance of alkali-activated cementitious composite mortar used for insulating walls	102867
Rodríguez Pérez, Isis / Vasconcelos, Graça / Lourenço, Paulo B. / Quintana, Patricia / García, Claudia / Dionísio, Amélia	Physical-mechanical characterization of limestones from Yucatan churches, Mexico	102895
He, Deqiang / Teng, Xiaoliang / Chen, Yanjun / Yuan, Yuzhao / Li, Xianwang / Shan, Sheng	Piston wind characteristic and energy saving of metro station environmental control system	102664
Revilla-Cuesta, Víctor / Faleschini, Flora / Zanini, Mariano A. / Skaf, Marta / Ortega-López, Vanesa	Porosity-based models for estimating the mechanical properties of self-compacting concrete with coarse and fine recycled concrete aggregate	103425
Tonidis, Margaritis / Bošnjak, Josipa / Sharma, Akanshu	Post-fire performance of RC beams with critical lap splices – Part II: Numerical parametric study	102637
Zhiyi, Zhang / Wei, Yin / Tianwen, Wang / Yonghan, Li / Yawen, Zhong / Guoqiang, Zhang	Potential of cross-ventilation channels in an ideal typical apartment building predicted by CFD and multi-zone airflow model	103408
Al-Saadi, Saleh N.	Pragmatic retrofitting strategies for improving thermal, energy, and economic performance of an institutional building in a cooling-dominated climate	103326
Nuaklong, Peem / Worawatnalunart, Papassara / Jongvivatsakul, Pitcha / Tangaramvong, Sawekchai / Pothisiri, Thanyawat / Likitlersuang, Suched	Pre- and post-fire mechanical performances of high calcium fly ash geopolymer concrete containing granite waste	103265
Wu, Jie / Zhang, Lin / Li, Yaohan / Dong, You	Prediction of dry shrinkage deformation for partially enclosed steel reinforced concrete columns	102675
Kaya, Nalan / Anil, Özgür	Prediction of load capacity of one way reinforced concrete slabs with openings using nonlinear finite element analysis	102945
Rao, V. Venkateswara / Garg, Tarun / Datta, Santanu Prasad	Predictive assessment from ANN and MLR models to optimize the ideal evaporative/hybrid cooler based on experimental observations	103256
Wang, Yifan / Tan, Hongbo / Gu, Xianyue / He, Xingyang / Zhang, Junjie	Preparation of nano-kaolin by wet-grinding process and its application as accelerator in Portland cement	103401
Zmrhal, Vladimír / Boháč, Jindřich	Pressure loss of flexible ventilation ducts for residential ventilation: Absolute roughness and compression effect	103320
Niu, Dapeng / Guo, Lei / Bi, Xiaolin / Wen, Di	Preventive maintenance period decision for elevator parts based on multi-objective optimization method	102984
Aydoğmuş, Ercan / Arslanoğlu, Hasan / Dağ, Mustafa	Production of waste polyethylene terephthalate reinforced biocomposite with RSM design and evaluation of thermophysical properties by ANN	103337
Wu, Huixia / Liang, Chaofeng / Xiao, Jianzhuang / Ma, Zhiming	Properties and CO2-curing enhancement of cement-based materials containing various sources of waste hardened cement paste powder	102677
Topçu, İlker Bekir / Sofuoğlu, Taylan	Properties of geopolymers produced with sugar press filter waste and fly ash under certain curing conditions	102938
Cai, Jiwei / Lv, Ningwei / Jia, Xiangyu / Zhang, Ruifang / Xu, Gelong / Cai, Lixiong / Tian, Qing	Properties of permeable ceramic brick prepared with felsite tailing	103426
Elsayed, Mahmoud / Tayeh, Bassam A. / Mohamed, Mai / Elymany, Magdy / Mansi, Ahmed Hamdi	Punching shear behaviour of RC flat slabs incorporating recycled coarse aggregates and crumb rubber	103363
Zhang, Chengwen / Chun, Qing / Lin, Yijie / Han, Yidan / Jia, Xiaohu	Quantitative assessment method of structural safety for complex timber structures with decay diseases	103355
Diaconu, Bogdan / Cruceru, Mihai / Anghelescu, Lucica	A quantitative metric for the indoor environment radiative field asymmetry developed through numerical simulation of the radiative field structure	103345
Aragó, Anna Baldrich / Hernando, Jaume Roig / Llovera Saez, F. Javier / Bertran, Josep Coll	Quantity surveying and BIM 5D. Its implementation and analysis based on a case study approach in Spain	103234
Chen, Sisi / Zhao, Lihua / Zheng, Lintao / Bi, Guanghong	A rapid evaluation method for design strategies of high-rise office buildings achieving nearly zero energy in Guangzhou	103297
Sharda, Swati / Sharma, Kapil / Singh, Mukhtiar	A real-time automated scheduling algorithm with PV integration for smart home prosumers	102828
Fan, Yibo / Li, Shujing / Li, Yuanbing / Liang, Huqing / Tang, Mengxiong / Huang, Keke / Zhu, Lin	Recycling of municipal solid waste incineration fly ash in foam ceramic materials for exterior building walls	103427
Zhou, Huayuan / Sun, Yang / Zhong, Ke / Wang, Yuesi / Cai, Jie / Kang, Yanming	Regional standardized particle size distributions for developing a Chinese filter testing standard used in building ventilation	102972
Rueda López, María José / Guyot, Gaëlle / Golly, Benjamin / Ondarts, Michel / Wurtz, Frederic / Gonze, Evelyne	Relevance of CO2-based IAQ indicators: Feedback from long-term monitoring of three nearly zero-energy houses	103350
Gholami, M. / Naderpour, H.	A Reliability-based Approach and Code Calibration of FRP-Confined Rectangular RC Columns Subjected to Concentric Loading	102672
Rahgozar, Navid / Pouraminian, Majid / Rahgozar, Nima	Reliability-based seismic assessment of controlled rocking steel cores	102623
Ouyang, Li-Jun / Chai, Mao-Xiang / Song, Jiang / Hu, Li-li / Gao, Wan-Yang	Repair of thermally damaged circular concrete cylinders with basalt fiber-reinforced polymer jackets	102673
Liu, Yang	Research on flexible unloading method for dynamic compaction	103359
Medel-Vera, Carlos / Contreras, María Carolina	Resilience-based predictive models for the seismic behaviour of mid-rise, base-isolated CLT buildings for social housing applications in Chile	103397
Lu, Jingyi / Wang, Yonghui / Zhai, Ximei	Response of flat steel-concrete-corrugated steel sandwich panel under drop-weight impact load by a hemi-spherical head	102890
Zuo, Yining / Xu, Zhifeng / Chen, Zhongfan / Dai, Sujuan	Restoring-force model for HFC-filled CFS shear walls subjected to in-plane cyclic loading	103347
Danish, Aamar / Mosaberpanah, Mohammad Ali / Salim, Muhammad Usama / Fediuk, Roman / Rashid, Muhammad Fawad / Waqas, Rana Muhammad	Reusing marble and granite dust as cement replacement in cementitious composites: A review on sustainability benefits and critical challenges	102600
Tang, Shengwen / Huang, Desheng / He, Zhen	A review of autogenous shrinkage models of concrete	103412
Dzulkifli, Nur'afini / Sarbini, Noor Nabilah / Ibrahim, Izni Syahrizal / Abidin, Nur Izieadiana / Yahaya, Fadzil Mat / Nik Azizan, Nik Zainab	Review on maintenance issues toward building maintenance management best practices	102985
Baloch, Waqas Latif / Siad, Hocine / Lachemi, Mohamed / Şahmaran, Mustafa	A review on the durability of concrete-to-concrete bond in recent rehabilitated structures	103315
Tran, Mien V. / Cu, Yen T. H. / Le, Chau V. H.	Rheology and shrinkage of concrete using polypropylene fiber for 3D concrete printing	103400
Drury, Michael M. / Kordosky, Amy N. / Quiel, Spencer E.	Robustness of a partially restrained, partially composite steel floor beam to natural fire exposure: Novel validation and parametric analysis	102533
Abdel-Gawwad, Hamdy A. / Metwally, Khaled A. / Tawfik, Taher A.	Role of barium carbonate and barium silicate nanoparticles in the performance of cement mortar	102721
Manso, Maria / Sousa, Vitor / Silva, Cristina Matos / Cruz, Carlos Oliveira	The role of green roofs in post COVID-19 confinement: An analysis of willingness to pay	103388
Sena da Fonseca, B. / Ferreira Pinto, A. P. / Rodrigues, A. / Piçarra, S. / Montemor, M. F.	The role of properties on the decay susceptibility and conservation issues of soft limestones: Contribution of Ançã stone (Portugal)	102997
Zhang, Yue / Li, Dongsheng	Seismic behavior and design of repairable precast RC beam–concrete-filled square steel tube column joints with energy-dissipating bolts	103419
Razavi, Navid / Gholizadeh, Saeed	Seismic collapse safety analysis of performance-based optimally designed reinforced concrete frames considering life-cycle cost	103430
Ebrahimi, Samira / Mirghaderi, Seyed Rasoul	A seismic design method for one-piece gusset plate connections	102729
Wararuksajja, Wongsa / Srechai, Jarun / Leelataviwat, Sutat / Sungkamongkol, Trirat / Limkatanyu, Suchart	Seismic design method for preventing column shear failure in reinforced concrete frames with infill walls	102963
Yu, Eunjong / Kim, Taewan / Park, Ji-Hun	Seismic fragility analysis of steel intermediate moment frames with column-tree connections	102955
Huang, Wei / Hu, Gaoxing / Miao, Xinwei / Fan, Zhenhui	Seismic performance analysis of a novel demountable precast concrete beam-column connection with multi-slit devices	102663
Chong, Xun / Hou, Linbing / Xie, Linlin / Yang, Cantian	Seismic performance of a new energy dissipative cladding panel connection system for application in precast concrete frame structure	102671
Liao, Xiandong / Zhang, Shiqian / Cao, Zhiwei / Xiao, Xuwen	Seismic performance of a new type of precast shear walls with non-connected vertical distributed reinforcement	103219
Li, Zheng / Luo, Jing / He, Minjuan / Tao, Duo / Liang, Feng / He, Guirong	Seismic performance of multi-story glulam post-and-beam structures reinforced with knee-braces	102887
Cai, Zi-wei / Liu, Xin / Li, Ling-Zhi / Lu, Zhou-Dao / Chen, Yu	Seismic performance of RC beam-column-slab joints strengthened with steel haunch system	103250
Jiménez, Belén / Saloustros, Savvas / Pelà, Luca	Seismic vulnerability index method for hybrid timber–masonry structures. Numerical calibration and application to the city of Valparaíso, Chile	103185
Bahdad, Ali Ahmed Salem / Fadzil, Sharifah Fairuz Syed / Onubi, Hilary Omatule / BenLasod, Saleh Ahmed	Sensitivity analysis linked to multi-objective optimization for adjustments of light-shelves design parameters in response to visual comfort and thermal energy performance	102996
Yücenur, G. Nilay / Şenol, Kaan	Sequential SWARA and fuzzy VIKOR methods in elimination of waste and creation of lean construction processes	103196
Silva, A. / de Brito, J.	Service life of building envelopes: a critical literature review	102646
Rashid Wani, Zubair / Tantray, Manzoor / Farsangi, Ehsan Noroozinejad	Shaking table tests and numerical investigations of a novel response-based adaptive control strategy for multi-story structures with magnetorheological dampers	102685
Rizzo, Fabio / Barbato, Michele / Sepe, Vincenzo	Shape dependence of wind pressure peak factor statistics in hyperbolic paraboloid roofs	103203
Wang, Zhicheng / Cao, Zhenggang / Fan, Feng / Sun, Ying	Shape optimization of free-form grid structures based on the sensitivity hybrid multi-objective evolutionary algorithm	102538
Sohel, Kazi M. A. / Liew, J. Y. Richard / Fares, Ali Issa	Shear bond behavior of composite slabs with ultra-lightweight cementitious composite	103284
Parsa, Payam / Naderpour, Hosein	Shear strength estimation of reinforced concrete walls using support vector regression improved by Teaching–learning-based optimization, Particle Swarm optimization, and Harris Hawks Optimization algorithms	102593
Zhao, Zheng / Lv, Yang	Shear strength of steel plate shear walls considering the gravity load and in-plane bending moment effect by vertical stress distributions	103012
de Castro, Manuela / Kuchai, Noorullah / Natarajan, Sukumar / Adeyeye, Kemi / Fosas, Daniel / Moran, Francis / McCullen, Nick / Wang, Zu / Coley, David	ShelTherm: an aid-centric thermal model for shelter design	102579
Ajrina, Zhafirah / Mangkuto, Rizki A. / Soelami, F. X. Nugroho	Spectral reflectance and chromaticity differences of various colors of interior finishing material samples under tunable LED lamps	103280
Ahmed, Ayaz / Qayoum, Adnan / Mir, Fasil Qayoom	Spectroscopic studies of renewable insulation materials for energy saving in building sector	103300
Sornlar, Watcharee / Wannagon, Anucha / Supothina, Sitthisuntorn	Stabilized homogeneous porous structure and pore type effects on the properties of lightweight kaolinite-based geopolymers	103273
Belizario-Silva, Fernanda / Galimshina, Alina / Reis, Daniel Costa / Quattrone, Marco / Gomes, Beatriz / Marin, Marcelo Cuadrado / Moustapha, Maliki / John, Vanderley / Habert, Guillaume	Stakeholder influence on global warming potential of reinforced concrete structure	102979
Rai, Baboo / Singh, Niraj Kumar	Statistical and experimental study to evaluate the variability and reliability of impact strength of steel-polypropylene hybrid fiber reinforced concrete	102937
Hauashdh, Ali / Jailani, Junaidah / Rahman, Ismail Abdul / AL-fadhali, Najib	Structural equation model for assessing factors affecting building maintenance success	102680
Hematabadi, Hojat / Madhoushi, Mehrab / Khazaeian, Abolghasem / Ebrahimi, Ghanbar	Structural performance of hybrid Poplar-Beech cross-laminated-timber (CLT)	102959
Naser, M. Z. / Kodur, Venkatesh / Thai, Huu-Tai / Hawileh, Rami / Abdalla, Jamal / Degtyarev, Vitaliy V.	StructuresNet and FireNet: Benchmarking databases and machine learning algorithms in structural and fire engineering domains	102977
Hou, Zhaoning / Wang, Lin / Yan, Xiaona / Wang, Zhanwei / An, Libei	Study on characteristics of the cavitation bubble dynamics of lithium bromide aqueous solution with ultrasonic interaction	102424
Chen, Dingshi / Sun, Guorui / Hu, Dalin / Shi, Jun	Study on the bearing capacity and chloride ion resistance of RC structures under multi-factor corrosive environment and continuous load	102990
Shang, Xing-yan / Xu, Fang-zheng / Yu, Jiang-Tao / Li, Ling-Zhi / Lu, Zhou-Dao	Study on the interfacial shear performance between engineered cementitious composites and concrete after being subjected to high temperatures	103328
Nakagawa, Akito / Nakaya, Takashi	A survey of clothing insulation for university students in Japan: Effect of clothing insulation distribution between the upper and lower body in the winter	103287
Zhang, Xiaocun / Zhang, Xueqi	Sustainable design of reinforced concrete structural members using embodied carbon emission and cost optimization	102940
Ramezanianpour, Ali Akbar / Mortezaei, Mehrdad / Mirvalad, Sajjad	Synergic effect of nano-silica and natural pozzolans on transport and mechanical properties of blended cement mortars	102667
Chindaprasirt, Prinya / Srisuwan, Anuwat / Saengthong, Chiawchan / Lawanwadeekul, Siwat / Phonphuak, Nonthaphong	Synergistic effect of fly ash and glass cullet additive on properties of fire clay bricks	102942
Meyland, Martin J. / Nielsen, Jens H. / Kocer, Cenk	Tensile behaviour of soda-lime-silica glass and the significance of load duration – A literature review	102966
Yang, Yingxia / Wang, Zhichao / Li, Xiaofeng / Wang, Honglei / Ren, Yujie / Zhao, Dan / Xu, Zhaowei	Test and simulation for the airtightness of backdraft dampers in residential cooking exhaust shaft systems	103007
Xin, Zhang / Jianyang, Xue / Rui, Ren / Linlin, Ma	Test on pure torsion behavior of channel steel reinforced concrete beams	102967
Campos, R. S. / Maciel, G. F.	Test protocol and rheological model influence on determining the rheological properties of cement pastes	103206
Anwer, Shahnawaz / Li, Heng / Antwi-Afari, Maxwell Fordjour / Umer, Waleed / Mehmood, Imran / Al-Hussein, Mohamed / Wong, Arnold Yu Lok	Test-retest reliability, validity, and responsiveness of a textile-based wearable sensor for real-time assessment of physical fatigue in construction bar-benders	103348
Takakusagi, Akira	Theoretical study evaluating renewal of an air-conditioning system	102876
Asli, M. / Brachelet, F. / Sassine, E. / Antczak, E.	Thermal and hygroscopic study of hemp concrete in real ambient conditions	102612
Sharma, Aanchal / Kumar, Ashok / Kulkarni, Kishor S.	Thermal comfort studies for the naturally ventilated built environments in Indian subcontinent: A review	103242
Ramos, Ana / Briga-Sá, Ana / Pereira, Sandra / Correia, Mariana / Pinto, Jorge / Bentes, Isabel / Teixeira, Carlos A.	Thermal performance and life cycle assessment of corn cob particleboards	102998
Karimipour, Arash / Jahangir, Hashem / Rezazadeh Eidgahee, Danial	A thorough study on the effect of red mud, granite, limestone and marble slurry powder on the strengths of steel fibres-reinforced self-consolidation concrete: Experimental and numerical prediction	103398
Kolozvari, Kristijan / Kalbasi, Kamiar / Orakcal, Kutay / Wallace, John	Three-dimensional shear-flexure interaction model for analysis of non-planar reinforced concrete walls	102946
Tyukavkina, V. V. / Shchelokova, E. A. / Tsyryatyeva, A. V. / Kasikov, A. G.	TiO2-SiO2 nanocomposites from technological wastes for self-cleaning cement composition	102648
Zhang, Hongru / Liu, Wenshen / Lin, Xujian / Su, Shangliang / Zhao, Baojun	To ameliorate the performance of recycled aggregate concrete (RAC) by pre-treating aggregate in sulfoaluminate cement slurry and water glass solution	103364
Shah, Syed Nasir / Mo, Kim Hung / Yap, Soon Poh / Radwan, Mohammed K. H.	Towards an energy efficient cement composite incorporating silica aerogel: A state of the art review	103227
Tumminia, Giovanni / Sergi, Francesco / Aloisio, Davide / Longo, Sonia / Cusenza, Maria Anna / Guarino, Francesco / Cellura, Salvatore / Ferraro, Marco	Towards an integrated design of renewable electricity generation and storage systems for NZEB use: A parametric analysis	103288
López-Ochoa, Luis M. / Las-Heras-Casas, Jesús / Olasolo-Alonso, Pablo / López-González, Luis M.	Towards nearly zero-energy buildings in Mediterranean countries: Fifteen years of implementing the Energy Performance of Buildings Directive in Spain (2006–2020)	102962
Bai, Xin / Yang, Mijia	UAV based accurate displacement monitoring through automatic filtering out its camera's translations and rotations	102992
Ghazi Wakili, K. / Raedle, W. / Krammer, A. / Uehlinger, A. / Schuler, A. / Stöckli, Th.	Ug-value and edge heat loss of triple glazed insulating glass units:A comparison between measured and declared values	103031
Mehdizadeh, Hamideh / Guo, Ming-Zhi / Ling, Tung-Chai	Ultra-fine sediment of Changjiang estuary as binder replacement in self-compacting mortar: Rheological, hydration and hardened properties	103251
Argenziano, M. / Faiella, D. / Bruni, F. / De Angelis, C. / Fraldi, M. / Mele, E.	Upwards - Vertical extensions of masonry built heritage for sustainable and antifragile urban densification	102885
Balinee, B. / Ranjith, P. G.	Use of discarded aluminium foil in cementitious material as fire retardant - An experimental study	103405
Lau, Erica / Hou, Huiying (Cynthia) / Lai, Joseph H. K. / Edwards, David / Chileshe, Nicholas	User-centric analytic approach to evaluate the performance of sports facilities: A study of swimming pools	102951
Calixto-Aguirre, I. / Huelsz, G. / Barrios, G. / Cruz-Salas, M. V.	Validation of thermal simulations of a non-air-conditioned office building in different seasonal, occupancy and ventilation conditions	102922
Morales, Bianca Rafaela da Silva Calderón / García-Martínez, Antonio / Pineda, Paloma / García-Tenório, Rafael	Valorization of phosphogypsum in cement-based materials: Limits and potential in eco-efficient construction	102506
Rashad, Alaa M. / Gharieb, Mahmoud	Valorization of sugar beet waste as an additive for fly ash geopolymer cement cured at room temperature	102989
Santana, Henrique A. / Amorim Júnior, Nilson S. / Ribeiro, Daniel V. / Cilla, Marcelo S. / Dias, Cléber M. R.	Vegetable fibers behavior in geopolymers and alkali-activated cement based matrices: A review	103291
Nochebuena-Mora, Elesban / Mendes, Nuno / Lourenço, Paulo B. / Covas, José A.	Vibration control systems: A review of their application to historical unreinforced masonry buildings	103333
He, Chenchen / Ho, Yuanyuan / Ding, Liping / Li, Peng	Visualized literature review on sustainable building renovation	102622
Kumar, Sumit / Dutta, Sekhar Chandra / Goswami, Kundan / Mandal, Parthasarathi	Vulnerability assessment of building structures due to underground blasts using ANN and non-linear dynamic analysis	102674
Bao, Jiuwen / Li, Shuguo / Yu, Zihao / Xu, Jun / Li, Yanlong / Zhang, Peng / Si, Zheng / Gao, Song	Water transport in recycled aggregate concrete under sustained compressive loading: Experimental investigation and mesoscale numerical modelling	103373
Gatheeshgar, Perampalam / Alsanat, Husam / Poologanathan, Keerthan / Gunalan, Shanmuganathan / Degtyareva, Natalia / Wanniarachchi, Somadasa / Fareed, Ishqy	Web crippling of slotted perforated Cold-Formed Steel channels under EOF load case: Simulation and design	103306

Über diese
Datenseite
IssueID
58585
Veröffentlicht am:
15.05.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Building Engineering - Dezember 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Building Engineering - Dezember 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.