Journal of Building Engineering - März 2020

Erschienen:	März 2020

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Ouali, Kaoutar / El Harrouni, Khalid / Abidi, Moulay Larbi / Diab, Youssef	Analysis of Open Urban Design as a tool for pedestrian thermal comfort enhancement in Moroccan climate	101042
Xu, Chengxiang / Peng, Sheng / Liu, Xiaoqiang / Wang, Chenfei / Xu, Qiqi	Analysis of the seismic behavior of CFRP-strengthened seismic-damaged composite steel-concrete frame joints	101057
Taleb, Hanan M. / Antony, Alan George	Assessing different glazing to achieve better lighting performance of office buildings in the United Arab Emirates (UAE)	101034
Yin, Fei / Xue, Su-Duo / Cao, Wan-lin / Dong, Hong-ying / Wu, Hai-Peng	Behavior of multi-cell concrete-filled steel tube columns under axial load: Experimental study and calculation method analysis	101099
Lee, Joohyun / McCuskey Shepley, Mardelle	Benefits of solar photovoltaic systems for low-income families in social housing of Korea: Renewable energy applications as solutions to energy poverty	101016
Mona Subramaniam, A. / Jain, Tushar / Yamé, Joseph J.	Bilinear model-based diagnosis of lock-in-place failures of variable-air-volume HVAC systems of multizone buildings	101023
Malanho, Sofia / Veiga, Maria do Rosário	Bond strength between layers of ETICS – Influence of the characteristics of mortars and insulation materials	101021
Raj, Amit / Borsaikia, Arun Ch. / Dixit, Uday S.	Bond strength of Autoclaved Aerated Concrete (AAC) masonry using various joint materials	101039
Mnasri, Faiza / Bahria, Sofiane / Slimani, Mohamed El-Amine / Lahoucine, Ouhsaine / El Ganaoui, Mohammed	Building incorporated bio-based materials: Experimental and numerical study	101088
Akaa, Obinna Ukeni / Abu, Anthony / Spearpoint, Michael	A case study of design decision-making for an exemplar steel portal-framed building under fire exposure using a hybrid analysis technique	101093
Singh, Harshbab / Gupta, Rishi	Cellulose fiber as bacteria-carrier in mortar: Self-healing quantification using UPV	101090
Marques, Beatriz / Tadeu, António / Almeida, João / António, Julieta / de Brito, Jorge	Characterization of sustainable building walls made from rice straw bales	101041
Silva, Hugo Entradas / Coelho, Guilherme B. A. / Henriques, Fernando M. A.	Climate monitoring in World Heritage List buildings with low-cost data loggers: The case of the Jerónimos Monastery in Lisbon (Portugal)	101029
Ahmadi Moghadam, Hajar / Mirzaei, Ali	Comparing the effects of a retarder and accelerator on properties of gypsum building plaster	101075
Beshara, F. B. A. / Mustafa, T. S. / Mahmoud, A. A. / Khalil, M. M. A.	Constitutive models for nonlinear analysis of SFRC corbels	101092
Liu, Hengrui / Wang, Cheng / De Cachinho Cordeiro, Ivan Miguel / Yuen, Anthony Chun Yin / Chen, Qian / Chan, Qing Nian / Kook, Sanghoon / Yeoh, Guan Heng	Critical assessment on operating water droplet sizes for fire sprinkler and water mist systems	100999
Katramiz, Elvire / Ghaddar, Nesreen / Ghali, Kamel	Daytime radiative cooling: To what extent it enhances office cooling system performance in comparison to night cooling in semi-arid climate?	101020
Gombeda, Matthew J. / Naito, Clay J. / Quiel, Spencer E.	Development and performance of a ductile shear tie for precast concrete insulated wall panels	101084
Morsy, M. S. / Rashad, Alaa M. / Shoukry, H. / Mokhtar, M. M. / El-Khodary, S. A.	Development of lime-pozzolan green binder: The influence of anhydrous gypsum and high ambient temperature curing	101026
Li, Baiyi / Zheng, Min / Shahrestani, Mehdi / Zhang, Shaoxing	Driving factors of the thermal efficiency of ground source heat pump systems with vertical boreholes in Chongqing by experiments	101049
Beskhyroun, Sherif / Navabian, Niusha / Wotherspoon, Liam / Ma, Quincy	Dynamic behaviour of a 13-story reinforced concrete building under ambient vibration, forced vibration, and earthquake excitation	101066
Mehrfeld, Philipp / Nürenberg, Markus / Knorr, Martin / Schinke, Lars / Beyer, Maximilian / Grimm, Manuel / Lauster, Moritz / Müller, Dirk / Seifert, Joachim / Stergiaropoulos, Konstantinos	Dynamic evaluations of heat pump and micro combined heat and power systems using the hardware-in-the-loop approach	101032
Heidarinejad, Ghassem / Rayegan, Saeed / Pasdarshahri, Hadi	Dynamic simulation of a solar desiccant cooling system combined with a ground source heat exchanger in humid climates	101048
Guha, Aioub H. / Assaf, Gabriel J.	Effect of Portland cement as a filler in hot-mix asphalt in hot regions	101036
Al-Jubainawi, Ali / Ma, Zhenjun / Guo, Yi / Nghiem, Long D.	Effect of regulating main governing factors on the selectivity membranes of electrodialysis used for LiCl liquid desiccant regeneration	101022
Saha, Ashish Kumer / Sarker, Prabir Kumar	Effect of sulphate exposure on mortar consisting of ferronickel slag aggregate and supplementary cementitious materials	101012
de Matos, Paulo Ricardo / Junckes, Ricardo / Graeff, Eduardo / Prudêncio Jr, Luiz Roberto	Effectiveness of fly ash in reducing the hydration heat release of mass concrete	101063
Steau, Edward / Mahendran, Mahen / Poologanathan, Keerthan	Elevated temperature thermal properties of carbon steels used in cold-formed light gauge steel frame systems	101074
Wasti, Syed Khurram Arslan / Zaidi, Shumaila Waqar	An empirical investigation between CO2 emission, energy consumption, trade liberalization and economic growth: A case of Kuwait	101104
Galadanci, Ahmad Said / Ianakiev, Anton / Kromanis, Rolands / Robinson, Julian	Energy investigation framework: Understanding buildings from an energy perspective view	101046
Malik, Jeetika / Bardhan, Ronita	Energy target pinch analysis for optimising thermal comfort in low-income dwellings	101045
Prabavathy, S. / Jeyasubramanian, K. / Prasanth, S. / Hikku, G. S. / Robert, R. B. Jeen	Enhancement in behavioral properties of cement mortar cubes admixed with reduced graphene oxide	101082
Gomes, Raul / Silvestre, José Dinis / de Brito, Jorge	Environmental life cycle assessment of the manufacture of EPS granulates, lightweight concrete with EPS and high-density EPS boards	101031
Cho, Hae-In / Cabrera, Daniel / Patel, Martin K.	Estimation of energy savings potential through hydraulic balancing of heating systems in buildings	101030
Kalantari, A. / Roohbakhsh, H.	Expected seismic fragility of code-conforming RC moment resisting frames under twin seismic events	101098
Lu, Jiang / Wang, Ke / Qu, Ming-Liang	Experimental determination on the capillary water absorption coefficient of porous building materials: A comparison between the intermittent and continuous absorption tests	101091
Rizzo, F. / Ricciardelli, F. / Maddaloni, G. / Bonati, A. / Occhiuzzi, A.	Experimental error analysis of dynamic properties for a reduced-scale high-rise building model and implications on full-scale behaviour	101067
Mali, Pankaj R. / Datta, Debarati	Experimental evaluation of bamboo reinforced concrete beams	101071
Drozdzol, Krzysztof	Experimental fire testing of an innovative three-layer chimney for residential buildings	101019
Evangelisti, Luca / Guattari, Claudia / Asdrubali, Francesco / de Lieto Vollaro, Roberto	An experimental investigation of the thermal performance of a building solar shading device	101089
Li, Chaoen / Yu, Hang / Song, Yuan / Tang, Yin / Chen, Pengda / Hu, Huixin / Wang, Meng / Liu, Zhiyuan	Experimental thermal performance of wallboard with hybrid microencapsulated phase change materials for building application	101051
Sainz-Aja, Jose / Carrascal, Isidro / Polanco, Juan A. / Thomas, Carlos	Fatigue failure micromechanisms in recycled aggregate mortar by μCT analysis	101027
Khosravikia, Farid / Kurkowski, Jennifer / Clayton, Patricia	Fragility of masonry veneers to human-induced Central U.S. earthquakes using neural network models	101100
Sanhudo, Luís / Ramos, Nuno M. M. / Poças Martins, João / Almeida, Ricardo M. S. F. / Barreira, Eva / Simões, M. Lurdes / Cardoso, Vítor	A framework for in-situ geometric data acquisition using laser scanning for BIM modelling	101073
Hang, Meiyan / Cui, Lei / Wu, Junqing / Sun, Zhongke	Freezing-thawing damage characteristics and calculation models of aerated concrete	101072
Slimanou, H. / Eliche-Quesada, D. / Kherbache, S. / Bouzidi, N. / Tahakourt, A./K.	Harbor Dredged Sediment as raw material in fired clay brick production: Characterization and properties	101085
Gholinejad, Hamid Reza / Loni, Abdolah / Adabi, Jafar / Marzband, Mousa	A hierarchical energy management system for multiple home energy hubs in neighborhood grids	101028
Sheikhshahrokhdehkordi, Mohammadamin / Khalesi, Javad / Goudarzi, Navid	High-performance building: Sensitivity analysis for simulating different combinations of components of a two-sided windcatcher	101079
Bonello, M. / Micallef, D. / Borg, S. P.	Humidity micro-climate characterisation in indoor environments: A benchmark study	101013
Madduru, Sri Rama Chand / Shaik, Khaja Sameer / Velivela, Ramesh / Karri, Vijay Kumar	Hydrophilic and hydrophobic chemicals as self curing agents in self compacting concrete	101008
Yuan, Bingxiang / Sun, Meng / Xiong, Lei / Luo, Qingzi / Pradhan, Sarada Prasad / Li, Hongzhong	Investigation of 3D deformation of transparent soil around a laterally loaded pile based on a hydraulic gradient model test	101024
Salgado, Rafael A. / Apul, Defne / Guner, Serhan	Life cycle assessment of seismic retrofit alternatives for reinforced concrete frame buildings	101064
Bavaresco, Mateus Vinícius / Ghisi, Enedir	A low-cost framework to establish internal blind control patterns and enable simulation-based user-centric design	101077
Kwon, Nahyun / Song, Kwonsik / Ahn, Yonghan / Park, Moonsun / Jang, Youjin	Maintenance cost prediction for aging residential buildings based on case-based reasoning and genetic algorithm	101006
Jaffal, Issa / Inard, Christian	A metamodeling method to study the nonlinearity of building thermal behavior	101078
Li, Zheng / Zhang, Qingwen / Fan, Feng / Shen, Shizhao	A method for calculating uncomfortable rates of people due to vertical floor vibrations using corresponding assessment values based on fuzzy reliability theory	101061
Awad, Hadia / Salim, K. M. Emtiaz / Gül, Mustafa	Multi-objective design of grid-tied solar photovoltaics for commercial flat rooftops using particle swarm optimization algorithm	101080
Chulvi, Vicente / Agost, María Jesús / Felip, Francisco / Gual, Jaume	Natural elements in the designer's work environment influence the creativity of their results	101033
Vona, Marco	A novel approach to improve the code provision based on a seismic risk index for existing buildings	101037
Guo, Menghuan / Grondin, Frédéric / Loukili, Ahmed	Numerical analysis of the failure of recycled aggregate concrete by considering the random composition of old attached mortar	101040
Bhamare, Dnyandip K. / Rathod, Manish K. / Banerjee, Jyotirmay	Numerical model for evaluating thermal performance of residential building roof integrated with inclined phase change material (PCM) layer	101018
Nguyen, Y. Q. / Wells, J. C.	A numerical study on induced flowrate and thermal efficiency of a solar chimney with horizontal absorber surface for ventilation of buildings	101050
Yu, Junqi / Liu, Qite / Zhao, Anjun / Qian, Xuegen / Zhang, Rui	Optimal chiller loading in HVAC System Using a Novel Algorithm Based on the distributed framework	101044
Kaveh, A. / Izadifard, R. A. / Mottaghi, L.	Optimal design of planar RC frames considering CO2 emissions using ECBO, EVPS and PSO metaheuristic algorithms	101014
Taleb, Sirine / Yeretzian, Aram / Jabr, Rabih A. / Hajj, Hazem	Optimization of building form to reduce incident solar radiation	101025
Zhang, Kevin / Richman, Russell	Parametric analysis of moisture sorption isotherms for wood sheathing using hygrothermal modelling	101047
Tong, Jing-Zhong / Pan, Wen-Hao / Shen, Min-Hui	Performance of double-skin composite walls with re-entrant profiled faceplates under eccentric compression	101010
Sánchez, Martha L. / Patiño, William / Cárdenas, Jhon	Physical-mechanical properties of bamboo fibers-reinforced biocomposites: Influence of surface treatment of fibers	101058
Zeng, Aaron / Ho, Hodde / Yu, Yao	Prediction of building electricity usage using Gaussian Process Regression	101054
Roslan, Nurul Hidayah / Ismail, Mohammad / Khalid, Nur Hafizah A. / Muhammad, Bala	Properties of concrete containing electric arc furnace steel slag and steel sludge	101060
Belmonte, Isabel Miñano / Benito Saorin, Francisco Javier / Costa, Carlos Parra / Valcuende Payá, Manuel	Quality of the surface finish of self-compacting concrete	101068
Hoseini Vaez, Seyed Rohollah / Mehanpour, Hashem / Fathali, Mohammad Ali	Reliability assessment of truss structures with natural frequency constraints using metaheuristic algorithms	101065
Fu, Haiyan / Ding, Yewei / Li, Minmin / Li, Haitao / Huang, Xiuling / Wang, Zheng	Research on thermal performance and hygrothermal behavior of timber-framed walls with different external insulation layer: Insulation Cork Board and anti-corrosion pine plate	101069
Khan, Md. Nabi Newaz / Saha, Ashish Kumer / Sarker, Prabir Kumar	Reuse of waste glass as a supplementary binder and aggregate for sustainable cement-based construction materials: A review	101052
Srisangeerthanan, Sriskanthan / Hashemi, M. Javad / Rajeev, Pathmanathan / Gad, Emad / Fernando, Saman	Review of performance requirements for inter-module connections in multi-story modular buildings	101087
Cardoni, Alessandro / Cimellaro, Gian Paolo	The role of reinforced concrete roofs in the seismic performance of masonry buildings	101056
Domínguez-Santos, D. / Letelier, V. / Muñoz, P.	Seismic capacity of 2- and 3-storey RC buildings with eco-concrete made by using residues for replacing natural aggregates	101086
Acito, Maurizio / Magrinelli, Eleonora / Milani, Gabriele / Tiberti, Simone	Seismic vulnerability of masonry buildings: Numerical insight on damage causes for residential buildings by the 2016 central Italy seismic sequence and evaluation of strengthening techniques	101081
Nalon, Gustavo Henrique / Rezende Santos, Carol Ferreira / Pedroti, Leonardo Gonçalves / Ribeiro, José Carlos Lopes / de Souza Veríssimo, Gustavo / Ferreira, Flávio Antônio	Strength and failure mechanisms of masonry prisms under compression, flexure and shear: Components’ mechanical properties as design constraints	101038
Terzi, E. / Fagiano, L. / Farina, M. / Scattolini, R.	Structured modelling from data and optimal control of the cooling system of a large business center	101043
Salimi, Javid / Ramezanianpour, Amir Mohammad / Moradi, Mohammad Javad	Studying the effect of low reactivity metakaolin on free and restrained shrinkage of high performance concrete	101053
Kirankumar, Gorantla / Saboor, Shaik / Vali, Shaik Sharmas / Mahapatra, Debasish / Talanki Puttaranga Setty, Ashok Babu / Kim, Ki-Hyun	Thermal and cost analysis of various air filled double glazed reflective windows for energy efficient buildings	101055
Talaei, Maryam / Mahdavinejad, Mohammadjavad / Azari, Rahman	Thermal and energy performance of algae bioreactive façades: A review	101011
Bruno, Agostino Walter / Gallipoli, Domenico / Perlot, Céline / Kallel, Hatem	Thermal performance of fired and unfired earth bricks walls	101017
Bellazzi, A. / Barozzi, B. / Pollastro, M. C. / Meroni, I.	Thermal resistance of growing media for green roofs: To what extent does the absence of specific reference values potentially affect the global thermal resistance of the green roof? An experimental example	101076
Blandón, Carlos / Bonett, Ricardo	Thin slender concrete rectangular walls in moderate seismic regions with a single reinforcement layer	101035
Lippiatt, Nicholas / Ling, Tung-Chai / Pan, Shu-Yuan	Towards carbon-neutral construction materials: Carbonation of cement-based materials and the future perspective	101062
Congedo, Paolo Maria / Baglivo, Cristina / Centonze, Giulia	Walls comparative evaluation for the thermal performance improvement of low-rise residential buildings in warm Mediterranean climate	101059

Über diese
Datenseite
IssueID
33818
Veröffentlicht am:
01.11.2019
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Building Engineering - März 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Building Engineering - März 2020

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.