Journal of Building Engineering - September 2019

Erschienen:	September 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Robayo-Salazar, Rafael / Jesús, Carlos / Mejía de Gutiérrez, Ruby / Pacheco-Torgal, F.	Alkali-activated binary mortar based on natural volcanic pozzolan for repair applications	100785
Algburi, Atheer H. M. / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Analytical investigation on the behavior of circular and square RC columns strengthened with RPC and wrapped with FRP under uniaxial compression	100833
Tian, Zhichao / Si, Binghui / Shi, Xing / Fang, Zigeng	An application of Bayesian Network approach for selecting energy efficient HVAC systems	100796
Saleem, M. A. / Abbas, S. / Nehdi, M. L.	Assessment of reinforced concrete slabs using in-situ load testing: A case study	100844
Daemei, Abdollah Baghaei / Eghbali, Seyed Rahman / Khotbehsara, Elham Mehrinejad	Bioclimatic design strategies: A guideline to enhance human thermal comfort in Cfa climate zones	100758
Nawari, Nawari O. / Ravindran, Shriraam	Blockchain and the built environment: Potentials and limitations	100832
Charef, Rabia / Emmitt, Stephen / Alaka, Hafiz / Fouchal, Farid	Building Information Modelling adoption in the European Union: An overview	100777
Rukijkanpanich, Jittra / Thongchai, Nattawoot	Burned brick production from residues of quarrying process in Thailand	100811
Huang, Honglan / Burton, Henry V.	Classification of in-plane failure modes for reinforced concrete frames with infills using machine learning	100767
Chieffo, Nicola / Clementi, Francesco / Formisano, Antonio / Lenci, Stefano	Comparative fragility methods for seismic assessment of masonry buildings located in Muccia (Italy)	100813
Joyram, Hashita	A critical evaluation on the factors impacting the adoption of eco-block as a green construction material: From a Mauritian perspective	100789
Ren, Guoquian / Li, Haijiang / Ding, Rui / Zhang, Jisong / Boje, Calin / Zhang, Weishuai	Developing an information exchange scheme concerning value for money assessment in Public-Private Partnerships	100828
Sharif, Seyed Amirhosain / Hammad, Amin	Developing surrogate ANN for selecting near-optimal building energy renovation methods considering energy consumption, LCC and LCA	100790
Ramkumar, V. R. / Murali, G. / Asrani, Neha P. / Karthikeyan, K.	Development of a novel low carbon cementitious two stage layered fibrous concrete with superior impact strength	100841
Fulpagare, Yogesh / Bhargav, Atul / Joshi, Yogendra	Dynamic thermal characterization of raised floor plenum data centers: Experiments and CFD	100783
Lin, S. L. / Chow, W. K. / Woo, Y. K. / Szeto, D. F. / Su, ChungHwei	Effect of heat collector plate on thermal sensitivity of sprinkler heads in large terminal Halls	100787
Qasrawi, Hisham	Effect of the position of core on the strength of concrete of columns in existing structures	100812
Asadollahfardi, Gholamreza / MohsenZadeh, Pouriya / Saghravani, Seyed Fazlullah / mohamadzadeh, Niloofar	The effects of using metakaolin and micro-nanobubble water on concrete properties	100781
Singh, Navdeep / Singh, S. P.	Electrical resistivity of self consolidating concretes prepared with reused concrete aggregates and blended cements	100780
Mosavinejad, S. Hosein Ghasemzadeh / Ghanizadeh, Ardalan / Barandoust, Jalil	Electrode material as a decisive factor in electrical resistivity measurement of cement composites	100778
Setter, Lewis / Smoorenburg, Eric / Wijesuriya, Sajith / Tabares-Velasco, Paulo Cesar	Energy and hygrothermal performance of cross laminated timber single-family homes subjected to constant and variable electric rates	100784
Ali, Hikmat / Hashlamun, Rifqa	Envelope retrofitting strategies for public school buildings in Jordan	100819
Quaranta, Giuseppe / Demartino, Cristoforo / Xiao, Yan	Experimental dynamic characterization of a new composite glubam-steel truss structure	100773
Tavakoli, H. R. / Jalali, Pedram / Mahmoudi, Sina	Experimental evaluation of the effects of adding steel fiber on the post-cyclic behavior of reinforced self-compacting concrete beams	100771
Chourasia, Ajay / Singhal, Shubham / Parashar, Jalaj	Experimental investigation of seismic strengthening technique for confined masonry buildings	100834
Alomayri, Thamer	Experimental study of the microstructural and mechanical properties of geopolymer paste with nano material (Al2O3)	100788
Dewey, Justin / Tuladhar, Rabin / Sivakugan, Nagaratnam	Experimental study on the performance of notched round timber sections	100840
Lee, Joohyun / McCuskey Shepley, Mardelle / Choi, Jungmann	Exploring the effects of a building retrofit to improve energy performance and sustainability: A case study of Korean public buildings	100822
Boafo, Fred Edmond / Ahn, Jong-Gwon / Kim, Sang-Myung / Kim, Jin-Hee / Kim, Jun-Tae	Fenestration refurbishment of an educational building: Experimental and numerical evaluation of daylight, thermal and building energy performance	100803
Chen, Zhenlei / Li, Jiancheng / Sun, Longfei / Li, Long-yuan	Flexural buckling of sandwich beams with thermal-induced non-uniform sectional properties	100782
Saleh, Zein / Goldston, Matthew / Remennikov, Alex M. / Sheikh, M. Neaz	Flexural design of GFRP bar reinforced concrete beams: An appraisal of code recommendations	100794
O'Rear, Eric / Webb, David / Kneifel, Joshua / O'Fallon, Cheyney	Gas vs electric: Heating system fuel source implications on low-energy single-family dwelling sustainability performance	100779
Bansal, Sunita / Biswas, Srijit / Singh, S. K.	Holistic assessment of existing buildings: Indian context	100793
Ploskić, Adnan / Wang, Qian / Sadrizadeh, Sasan	A holistic performance evaluation of ventilation radiators – An assessment according to EN 442-2 using numerical simulations	100818
Asadi, Ashkan / Roshanzadeh, Behnam	Improving performance of two-stage desiccant cooling system by analyzing different regeneration configurations	100807
Simanic, Branko / Nordquist, Birgitta / Bagge, Hans / Johansson, Dennis	Indoor air temperatures, CO2 concentrations and ventilation rates: Long-term measurements in newly built low-energy schools in Sweden	100827
Zhao, Zhongwei / Liang, Bing / Liu, Haiqing / Xian, Lina	Load capacity of corroded welded hollow spherical joints subjected to bending moment and axial force	100824
Solla, Mohmed / Ismail, Lokman Hakim / Shaarani, Ahmad sharainon Md / Milad, Abdalrhman	Measuring the feasibility of using of BIM application to facilitate GBI assessment process	100821
Faraj, Rabar H. / Sherwani, Aryan Far H. / Daraei, Ako	Mechanical, fracture and durability properties of self-compacting high strength concrete containing recycled polypropylene plastic particles	100808
Yong, Seok-Gil / Kim, Jinho / Cho, Jinkyun / Koo, Junemo	Meta-models for building energy loads at an arbitrary location	100823
Diaz-Acevedo, Jairo A. / Grisales-Noreña, Luis F. / Escobar, Adolfo	A method for estimating electricity consumption patterns of buildings to implement Energy Management Systems	100774
Li, Xiuming / Lin, Sida / Zhang, Jili / Zhao, Tianyi	Model parameter identification of indoor temperature lag characteristic based on hysteresis relay feedback control in VAV systems	100839
Kesikidou, Fotini / Stefanidou, Maria	Natural fiber-reinforced mortars	100786
Nguyen, K. T. Q. / Mendis, P. / Fernando, S.	Novel modelling approach for evacuation strategies of tall towers - A case study of Lotus Tower	100763
Wijesooriya, K. / Mohotti, D. / Chauhan, Kapil / Dias-Da-Costa, D.	Numerical investigation of scale resolved turbulence models (LES, ELES and DDES) in the assessment of wind effects on supertall structures	100842
Saba, N. / Jawaid, M. / Alrashed, Maher M. / Alothman, Othman Y.	Oil palm waste based hybrid nanocomposites: Fire performance and structural analysis	100829
Cruz, Carlos Oliveira / Gaspar, Patrícia / de Brito, Jorge	On the concept of sustainable sustainability: An application to the Portuguese construction sector	100836
Fernandes Maciel, Ana Carolina / Carvalho, Michele Tereza	Operational energy of opaque ventilated façades in Brazil	100775
Sassine, Emilio / Cherif, Yassine / Antczak, Emmanuel	Parametric identification of thermophysical properties in masonry walls of buildings	100801
Chan, Daniel W. M. / Olawumi, Timothy O. / Ho, Alfred M. L.	Perceived benefits of and barriers to Building Information Modelling (BIM) implementation in construction: The case of Hong Kong	100764
Chaibeddra, S. / Kharchi, F.	Performance of Compressed Stabilized Earth Blocks in sulphated medium	100814
Booya, Emad / Gorospe, Karla / Das, Sreekanta	Performance of engineered pulp fibre reinforced composites subjected to weathering conditions	100816
Xie, Wei / Xia, Junwu / Zheng, Yuying / Wang, Qiufen / Chang, Hongfei / Yang, Shangtong	Performance of steel frames with new lightweight composite infill walls under curvature ground deformation	100805
Zareei, Seyed Alireza / Ameri, Farshad / Bahrami, Nasrollah / Shoaei, Parham / Musaeei, Hamid Reza / Salemi, Niloofar	Performance of sustainable high strength concrete with basic oxygen steel-making (BOS) slag and nano-silica	100791
Biyik, Emrah / Kahraman, Aysegul	A predictive control strategy for optimal management of peak load, thermal comfort, energy storage and renewables in multi-zone buildings	100826
Tadeu, Sérgio / Gonçalves, Márcio / Simões, Nuno / Costas, Guillermo / Tadeu, António	Procedure to select combined heating and hot water systems: An expeditious cost optimality approach	100838
Ilkhani, M. H. / Naderpour, H. / Kheyroddin, A.	A proposed novel approach for torsional strength prediction of RC beams	100810
Tuntachon, Soebpong / Kamwilaisak, Khanita / Somdee, Theerasak / Mongkoltanaruk, Wiyada / Sata, Vanchai / Boonserm, Kornkanok / Wongsa, Ampol / Chindaprasirt, Prinya	Resistance to algae and fungi formation of high calcium fly ash geopolymer paste containing TiO2	100817
Belussi, Lorenzo / Barozzi, Benedetta / Bellazzi, Alice / Danza, Ludovico / Devitofrancesco, Anna / Fanciulli, Carlo / Ghellere, Matteo / Guazzi, Giulia / Meroni, Italo / Salamone, Francesco / Scamoni, Fabio / Scrosati, Chiara	A review of performance of zero energy buildings and energy efficiency solutions	100772
Rashad, Alaa M.	A short manual on natural pumice as a lightweight aggregate	100802
Elshurafa, Amro M. / Alsubaie, Abdullah M. / Alabduljabbar, Ayman A. / Al-Hsaien, Shafi A.	Solar PV on mosque rooftops: Results from a pilot study in Saudi Arabia	100809
Siddika, Ayesha / Mamun, Md. Abdullah Al / Alyousef, Rayed / Amran, Y. H. Mugahed	Strengthening of reinforced concrete beams by using fiber-reinforced polymer composites: A review	100798
Bedon, Chiara / Honfi, Dániel / Machalická, Klára V. / Eliášová, Martina / Vokáč, Miroslav / Kozłowski, Marcin / Wüest, Thomas / Santos, Filipe / Williams Portal, Natalie	Structural characterisation of adaptive facades in Europe - Part II: Validity of conventional experimental testing methods and key issues	100797
Bedon, Chiara / Honfi, Dániel / Machalická, Klára V. / Eliášová, Martina / Vokáč, Miroslav / Kozłowski, Marcin / Wüest, Thomas / Santos, Filipe / Williams Portal, Natalie	Structural characterisation of adaptive facades in Europe – Part I: Insight on classification rules, performance metrics and design methods	100721
Adesina, Peter A. / Olutoge, Festus A.	Structural properties of sustainable concrete developed using rice husk ash and hydrated lime	100804
Aguilera, José Joaquín / Kazanci, Ongun Berk / Toftum, Jørn	Thermal adaptation in occupant-driven HVAC control	100846
Hamdaoui, S. / Mahdaoui, M. / Kousksou, T. / El Afou, Y. / Ait Msaad, A. / Arid, A. / Ahachad, A.	Thermal behaviour of wallboard incorporating a binary mixture as a phase change material	100820
Santos, Paulo / Gonçalves, Margarida / Martins, Cláudio / Soares, Nelson / Costa, José J.	Thermal transmittance of lightweight steel framed walls: Experimental versus numerical and analytical approaches	100776
Belayachi, Naima / Mallet, Céline / El Marzak, Mounir	Thermally-induced cracks and their effects on natural and industrial geomaterials	100806
Hamdy, Gehan A. / El-Hariri, Mohamed O. R. / Farag, Mohamed F.	Use of additives in mortar to enhance the compression and bond strength of masonry exposed to different environmental conditions	100765
Yousuf, S. / Sanchez, L. F. M. / Shammeh, S. A.	The use of particle packing models (PPMs) to design structural low cement concrete as an alternative for construction industry	100815

Über diese
Datenseite
IssueID
28346
Veröffentlicht am:
28.04.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Building Engineering - September 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Building Engineering - September 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.