Journal of Building Engineering - Juli 2017

Erschienen:	Juli 2017

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Jorens, Sandy / Sörensen, Kenneth / Verhaert, Ivan / De Corte, Annelies	Air distribution system design optimization in non-residential buildings: Problem formulation and generation of test networks	60-67
Shao, Nina / Zhang, Jili / Ma, Liangdong	Analysis on indoor thermal environment and optimization on design parameters of rural residence	229-238
Niemelä, Timo / Vinha, Juha / Lindberg, Ralf / Ruuska, Tiina / Laukkarinen, Anssi	Carbon dioxide permeability of building materials and their impact on bedroom ventilation need	99-108
Brambilla, Arianna / Salvalai, Graziano / Tonelli, Chiara / Imperadori, Marco	Comfort analysis applied to the international standard "Active House": The case of RhOME, the winning prototype of Solar Decathlon 2014	210-218
Verstraten, Luke / Lucke, Terry / O'Loughlin, Geoffrey	Comparing empirical water depth observations of a box gutter roof drainage system to three different international design guidelines	178-187
Rashid, Khuram / Waqas, Rumman	Compressive strength evaluation by non-destructive techniques: An automated approach in construction industry	147-154
Ahn, Jonghoon / Cho, Soolyeon	Dead-band vs. machine-learning control systems: Analysis of control benefits and energy efficiency	17-25
Kilaire, A. / Stacey, M.	Design of a prefabricated passive and active double skin façade system for UK offices	161-170
Papathanasopoulos, D. / Leftheriotis, G. / Mitronikas, E.	Design, fabrication, and testing of an electronic device for the automatic control of electrochromic windows	248-258
Bahadori, Hadi / Hasheminezhad, Araz / Karimi, Amjad	Development of an integrated model for seismic vulnerability assessment of residential buildings: Application to Mahabad City, Iran	118-131
Li, Xiuming / Zhao, Tianyi / Zhang, Jili / Chen, Tingting	Development of network control platform for energy saving of fan coil units	155-160
Kimouche, Nedjmeddine / Mahri, Zinelabidine / Abidi-Saad, Aissa / Popa, Catalin / Polidori, Guillaume / Maalouf, Chadi	Effect of inclination angle of the adiabatic wall in asymmetrically heated channel on natural convection: Application to double-skin façade design	171-177
Hanoon, Ammar N. / Jaafar, M. S. / Al Zaidee, Salah R. / Hejazi, Farzad / Aziz, F. N. A. Abd	Effectiveness factor of the strut-and-tie model for reinforced concrete deep beams strengthened with CFRP sheet	8-16
Zhao, Dong-Xue / He, Bao-Jie	Effects of architectural shapes on surface wind pressure distribution: Case studies of oval-shaped tall buildings	219-228
Vásquez-Hernández, Alejandro / Restrepo Álvarez, Mario Fernando	Evaluation of buildings in real conditions of use: Current situation	26-36
Nováková, Kateřiná / Šeps, Karel / Achten, Henri	Experimental development of a plastic bottle usable as a construction building block created out of polyethylene terephthalate: Testing PET(b)rick 1.0	239-247
Sang, Yizhou / Zhao, Joe R. / Sun, Jiaojiao / Chen, Bin / Liu, Sen	Experimental investigation and EnergyPlus-based model prediction of thermal behavior of building containing phase change material	259-266
Mousavi, Seyed Esmaeil	Flexural response and crack development properties of ferrocement panels reinforced with steel fibers	325-331
Belakroum, R. / Gherfi, A. / Bouchema, K. / Gharbi, A. / Kerboua, Y. / Kadja, M. / Maalouf, C. / Mai, T. H. / El Wakil, N. / Lachi, M.	Hygric buffer and acoustic absorption of new building insulation materials based on date palm fibers	132-139
Kani-Sanchez, Cassandra / Richman, Russell	Incorporating variable refrigerant flow (VRF) heat pump systems in whole building energy simulation – Detailed case study using measured data	314-324
Abanda, F. H. / Oti, A. H. / Tah, J. H. M.	Integrating BIM and new rules of measurement for embodied energy and CO 2 assessment	288-305
Csáky, Imre / Kalmár, Ferenc	Investigation of the relationship between the allowable transparent area, thermal mass and air change rate in buildings	1-7
Xu, Hui / Xue, Bin	Key indicators for the resilience of complex urban public spaces	306-313
Block, P. / Schlueter, A. / Veenendaal, D. / Bakker, J. / Begle, M. / Hischier, I. / Hofer, J. / Jayathissa, P. / Maxwell, I. / Echenagucia, T. Méndez / Nagy, Z. / Pigram, D. / Svetozarevic, B. / Torsing, R. / Verbeek, J. / Willmann, A. / Lydon, G. P.	NEST HiLo: Investigating lightweight construction and adaptive energy systems	332-341
Hantsch, Andreas / Friebe, Christian / Döge, Sabine	Numerical investigation of energetic effects of flow-through wall elements	51-59
Alberto, André / Ramos, Nuno M. M. / Almeida, Ricardo M. S. F.	Parametric study of double-skin facades performance in mild climate countries	87-98
Nadesan, Manu S. / Dinakar, Pasla	Permeation properties of high strength self-compacting and vibrated concretes	275-281
Qoku, Elsa / Bier, Thomas A. / Westphal, Torsten	Phase assemblage in ettringite-forming cement pastes: A X-ray diffraction and thermal analysis characterization	37-50
Morgan, David T. / Daly, Terence / Gallagher, John / McNabola, Aonghus	Reducing energy consumption and increasing filter life in HVAC systems using an aspiration efficiency reducer: Long-term performance assessment at full-scale	267-274
Nazari, Yasamin Rafie / Saatcioglu, Murat	Seismic vulnerability assessment of concrete shear wall buildings through fragility analysis	202-209
Khodair, Yasser	Self-compacting concrete using recycled asphalt pavement and recycled concrete aggregate	282-287
Mousa, Wael A. Yousef / Lang, Werner / Yousef, Waleed A.	Simulations and quantitative data analytic interpretations of indoor-outdoor temperatures in a high thermal mass structure	68-76
Teixeira, S. / Puente, I. / Santilli, A.	Statistical model for predicting the maximum lateral pressure exerted by self-consolidating concrete on vertical formwork	77-86
Stahl, Thomas / Wakili, Karim Ghazi / Hartmeier, Severin / Franov, Emil / Niederberger, Walter / Zimmermann, Mark	Temperature and moisture evolution beneath an aerogel based rendering applied to a historic building	140-146
Juanicó, Luis E. / González, Alejandro D.	Thermal insulators with multiple air gaps: Performance, cost and embodied impacts	188-195
El Wazna, Mohamed / El Fatihi, Mohamed / El Bouari, Abdeslam / Cherkaoui, Omar	Thermo physical characterization of sustainable insulation materials made from textile waste	196-201
Perera, Shihara / Lam, Nelson / Pathirana, Mahil / Zhang, Lihai / Ruan, Dong / Gad, Emad	Use of static tests for predicting damage to cladding panels caused by storm debris	109-117

Über diese
Datenseite
IssueID
16995
Veröffentlicht am:
02.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Building Engineering - Juli 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Building Engineering - Juli 2017

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.