Journal of Building Engineering - September 2018

Erschienen:	September 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Pan, Li / Xu, Qiang / Nie, Yue / Qiu, Tong	Analysis of climate adaptive energy-saving technology approaches to residential building envelope in Shanghai	266-272
Souza, Jéssica / Silva, Ana / de Brito, Jorge / Bauer, Elton	Application of a graphical method to predict the service life of adhesive ceramic external wall claddings in the city of Brasília, Brazil	1-13
Charef, Rabia / Alaka, Hafiz / Emmitt, Stephen	Beyond the third dimension of BIM: A systematic review of literature and assessment of professional views	242-257
Srivastava, Prateek / Khan, Yasin / Bhandari, Mahabir / Mathur, Jyotirmay / Pratap, Ranaveer	Calibrated simulation analysis for integration of evaporative cooling and radiant cooling system for different Indian climatic zones	561-572
Venkatesan, K. / Ramachandraiah, U.	Climate responsive cooling control using artificial neural networks	191-204
Berglund, Daniel / Kharazmi, Parastou / Miliutenko, Sofiia / Björk, Folke / Malmqvist, Tove	Comparative life-cycle assessment for renovation methods of waste water sewerage systems for apartment buildings	98-108
Shafigh, Payam / Asadi, Iman / Mahyuddin, Norhayati Binti	Concrete as a thermal mass material for building applications - A review	14-25
Laukkarinen, Anssi / Kero, Paavo / Vinha, Juha	Condensation at the exterior surface of windows	592-601
Karami, Majid / McMorrow, Gabrielle Viola / Wang, Liping	Continuous monitoring of indoor environmental quality using an Arduino-based data acquisition system	412-419
Pham, Chuan / Tran, Nguyen H. / Ren, Shaolei / Seon Hong, Choong / Nguyen, Kim Khoa / Cheriet, Mohamed	A distributed approach to emergency demand response in geo-distributed mixed-use buildings	506-518
Binici, Hanifi / Aksogan, Orhan	Durability of concrete made with natural granular granite, silica sand and powders of waste marble and basalt as fine aggregate	109-121
Golshan, Milad / Thoen, Hester / Zeiler, Wim	Dutch sustainable schools towards energy positive	161-171
Castiglioni, Carlo A. / Drei, Alberto / Kanyilmaz, Alper / Mouzakis, Harris P.	Earthquake-Induced pallet sliding in industrial racking systems	122-133
Jiang, Demin / An, Penghui / Cui, Suping / Xu, Feng / Tuo, Tianfu / Zhang, Jingzong / Jiang, Hao	Effect of leaf fiber modification methods on mechanical and heat-insulating properties of leaf fiber cement-based composite materials	573-583
Mangkuto, Rizki A. / Enge, Adriana / Munir, Filza / Soelami, F. X. Nugroho	The effects of illuminance, colour temperature, and colour rendering of various existing light-emitting diode lamps on subjective preference and performance in Indonesia	334-341
Sathiparan, Navaratnarajah / De Zoysa, H. T. S. M.	The effects of using agricultural waste as partial substitute for sand in cement blocks	216-227
Ghahramani, Ali / Dutta, Kanu / Becerik-Gerber, Burcin	Energy trade off analysis of optimized daily temperature setpoints	584-591
Yew, Ming Chian / Yew, Ming Kun / Saw, Lip Huat / Ng, Tan Ching / Chen, Kah Pin / Rajkumar, Durairaj / Beh, Jing Han	Experimental analysis on the active and passive cool roof systems for industrial buildings in Malaysia	134-141
Moosavi, Leila / Zandi, Majid / Bidi, Mokhtar	Experimental study on the cooling performance of solar-assisted natural ventilation in a large building in a warm and humid climate	228-241
Almeida, Giana / Rémond, Romain / Perré, Patrick	Hygroscopic behaviour of lignocellulosic materials: Dataset at oscillating relative humidity variations	320-333
Rajan, R. K. C. / Rijal, H. B. / Shukuya, M. / Yoshida, K.	An in-situ study on occupants' behaviors for adaptive thermal comfort in a Japanese HEMS condominium	402-411
Maslesa, Esmir / Jensen, Per Anker / Birkved, Morten	Indicators for quantifying environmental building performance: A systematic literature review	552-560
Azevedo, A. R. G. / França, B. R. / Alexandre, J. / Marvila, M. T. / Zanelato, E. B. / Xavier, G. C.	Influence of sintering temperature of a ceramic substrate in mortar adhesion for civil construction	342-348
Naderpour, H. / Mirrashid, M.	An innovative approach for compressive strength estimation of mortars having calcium inosilicate minerals	205-215
Temga, Jean Pierre / Madi, Achille Balo / Djakba, Simon Basga / Zame, Philemon Zo'o / Angue, Monique Abessolo / Mache, Jacques Richard / Nguetnkam, Jean Pierre / Bitom, Lucien Dieudonné	Lime – and sand – stabilization of clayey materials from the Logone valley (Lake Chad basin) for their utilisation as building materials	472-479
Libessart, Laurent / Kenai, Mohamed Amine	Measuring thermal conductivity of green-walls components in controlled conditions	258-265
Bernardo, L. F. A. / Teixeira, M. M.	Modified softened truss-model for prestressed concrete beams under torsion	49-61
Moghtadernejad, Saviz / Chouinard, Luc. E. / Mirza, M. Saeed	Multi-criteria decision-making methods for preliminary design of sustainable facades	181-190
Fallah, Narges / Hoseini Vaez, Seyed Rohollah / Mohammadzadeh, Ali	Multi-damage identification of large-scale truss structures using a two-step approach	494-505
Boscato, G. / Mora, T. Dalla / Peron, F. / Russo, S. / Romagnoni, P.	A new concrete-glulam prefabricated composite wall system: Thermal behavior, life cycle assessment and structural response	384-401
Cannistraro, Mauro / Castelluccio, Maria Elena / Germanò, David	New sol-gel deposition technique in the Smart-Windows – Computation of possible applications of Smart-Windows in buildings	295-301
Mesquita, Esequiel / Martini, Rachel / Alves, André / Antunes, Paulo / Varum, Humberto	Non-destructive characterization of ancient clay brick walls by indirect ultrasonic measurements	172-180
Porcu, Maria Cristina / Bosu, Claudio / Gavric, Igor	Non-linear dynamic analysis to assess the seismic performance of cross-laminated timber structures	480-493
Ruggieri, S. / Porco, F. / Uva, G.	A numerical procedure for modeling the floor deformability in seismic analysis of existing RC buildings	273-284
Ariyo, B. O. / Akorede, M. F. / Omeiza, I. O. A. / Amuda, S. A. Y. / Oladeji, S. A.	Optimisation analysis of a stand-alone hybrid energy system for the senate building, university of Ilorin, Nigeria	285-294
Jani, D. B. / Mishra, Manish / Sahoo, P. K.	Performance analysis of a solid desiccant assisted hybrid space cooling system using TRNSYS	26-35
Soltanzadeh, Alireza / Alaghmandan, Matin / Soltanzadeh, Hossein	Performance evaluation of refuge floors in combination with egress components in high-rise buildings	519-529
Zhu, Yimin / Saeidi, Sanaz / Rizzuto, Tracey / Roetzel, Astrid / Kooima, Robert	Potential and challenges of immersive virtual environments for occupant energy behavior modeling and validation: A literature review	302-319
Esparza L., Carlos J. / Escobar del Pozo, Carlos / Gómez A., Adolfo / Gómez A., Gabriel / Gonzalez C., Eduardo	Potential of a wet fabric device as a roof evaporative cooling solution: Mathematical and experimental analysis	366-375
Tenepalli, Jai Sai / Neeraja, D.	Properties of class F fly ash based geopolymer mortar produced with alkaline water	42-48
Huang, Zhide / Xie, Mowen / Zhao, Jinhui / Du, Yan / Song, Hong-ke	Rapid evaluation of safety-state in hidden-frame supported glass curtain walls using remote vibration measurement	91-97
Caruso, Claudia / Bento, Rita / Marino, Edoardo Michele / Castro, José Miguel	Relevance of torsional effects on the seismic assessment of an old RC frame-wall building in Lisbon	459-471
Shehadi, Maher	Review of humidity control technologies in buildings	539-551
Palanisamy, S. P. / Maheswaran, G. / Selvarani, A. Geetha / Kamal, C. / Venkatesh, G.	Ricinus communis – A green extract for the improvement of anti-corrosion and mechanical properties of reinforcing steel in concrete in chloride media	376-383
Abraik, Emad / Youssef, Maged A.	Seismic fragility assessment of superelastic shape memory alloy reinforced concrete shear walls	142-153
Kererekes, Zsuzsanna / Lublóy, Éva / Elek, Barbara / Restás, Ágoston	Standard fire testing of chimney linings from composite materials	530-538
Batool, Farnaz / Prasad, N. G. Narasimha / Bindiganavile, Vivek	Statistical modeling of thermal conductivity for cement-based foam	449-458
Thomas, Job / Thaickavil, Nassif Nazeer / Wilson, P. M.	Strength and durability of concrete containing recycled concrete aggregates	349-365
Kannam, Praveen / Sarella, Venkateswara Rao	A study on validation of shear behaviour of steel fibrous SCC based on numerical modelling (ATENA)	69-79
Darsanasiri, A. G. N. D. / Matalkah, Faris / Ramli, Salina / Al-Jalode, Kutaibah / Balachandra, Anagi / Soroushian, Parviz	Ternary alkali aluminosilicate cement based on rice husk ash, slag and coal fly ash	36-41
Jain, Megha / Pathak, K. K.	Thermal modelling of insulator for energy saving in existing residential building	62-68
Luhar, Salmabanu / Chaudhary, Sandeep / Luhar, Ismail	Thermal resistance of fly ash based rubberized geopolymer concrete	420-428
Martínez, Marcos / Huygen, Nathaniel / Sanders, John / Atamturktur, Sez	Thermo-fluid dynamic analysis of concrete masonry units via experimental testing and numerical modeling	80-90
Belazi, Walid / Ouldboukhitine, Salah-Eddine / Chateauneuf, Alaa / Bouchaïr, Abdelhamid	Uncertainty analysis of occupant behavior and building envelope materials in office building performance simulation	434-448
Nguyen, Hoang-Anh	Utilization of commercial sulfate to modify early performance of high volume fly ash based binder	429-433
Chandni, T. J. / Anand, K. B.	Utilization of recycled waste as filler in foam concrete	154-160

Über diese
Datenseite
IssueID
16992
Veröffentlicht am:
01.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Journal of Building Engineering - September 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Journal of Building Engineering - September 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.