Frattura ed Integrità Strutturale - v. 14, n. 52 (März 2020)

Erschienen:	März 2020

Autor(en)	Titel	Seite(n)
Bouali, Meriem Fakhreddine / Abdelkader, Hima	Alternative Estimation of Effective Young’s Modulus for Lightweight Aggregate Concrete LWAC	82-97
Li, Dandan / Zhang, Tierui	Building crack monitoring based on digital image processing	1-8
Farrahi, G. H. / Ahmadi, Alireza / Kashyzadeh, Kazem Reza / Jahani, Kambiz	A comparative study on the fatigue life of the vehicle body spot welds using different numerical techniques: Inertia relief and Modal dynamic analyses	67-81
Caselle, Chiara / Rita Bonetto, Sabrina Maria / Costanzo, Daniele	Crack coalescence and strain accommodation in gypsum rock	247-255
Tumanov, Andrey / Shlyannikov, V. N. / Zakharov, A. P.	Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction	299-309
Emidio Sobrinho, Brunno / Gomes, Gilberto / Vital da Silva, Welington / Silva, Ramon / Palechor, Erwin U. L. / Bezerra, Luciano M.	Differential Evolution Algorithm for Identification of Structural Damage in Steel Beams	51-66
Latifi, Hassan / Amini, Nahid	Effect of aggregate type on moisture susceptibility of modified cold recycled mix asphalt: evaluation by mechanical tests and Surface Free Energy method	211-229
El-Emam, Hesham / Reda, Ramy / Bneni, Mohamed / Seleem, Mohamed	Effect of concrete cover thickness and main reinforcement ratio on flexural behavior of RC beams strengthened by NSM-GFRP bars	197-210
Oudad, Wahid / Belhamiani, Mohamed / Zouambi, Leila	Elastoplastic analysis of cracked Aluminum plates with a hybrid repair technique using the bonded composite patch and drilling hole in opening mode I	256-268
Ayadi, Ayoub / Meftah, Kamel / Sedira, Lakhdar	Elastoplastic analysis of plane structures using improved membrane finite element with rotational DOFs: Elastoplastic analysis of plane structures	148-162
Ghahramanzadeh Asl, Hojjat / Çam, Salim / Orhan, Osman / Özel, Adnan	Experimental and Numerical Analysis of Epoxy Based Adhesive Failure on Mono- and Bi-Material Single Lap Joints Under Different Displacement Rates	9-24
Draï, Ahmed / Aour, Benaoumeur / Belayachi, Naima / Talha, Abderrahim / Benseddiq, Noureddine	Finte element modeling of the behavior of polymethyl-methacrylate (PMMA) during high pressure torsion process.	181-196
Laureys, Aurélie / Pinson, Margot / Claeys, Lisa / Deseranno, Tim / Depover, Tom / Verbeken, Kim	Initiation of hydrogen induced cracks at secondary phase particles	113-127
Akbari, Jalal / Ahmadifarid, Majid / Amiri, Abbas Kazemi	Multiple Crack Detection using Wavelet Transforms and Energy Signal Techniques	269-280
	Numerical Analysis and Verification of Residual Stress in T Joint of S355 Steel	25-32
Hebbar, Nabil / Hebbar, Imène / Bourada, Mohamed	Numerical modeling of bending, buckling, and vibration of functionally graded beams by using a higher-order shear deformation theory	230-246
Paermentier, Benoît / Debruyne, Dimitri / Talemi, Reza	Numerical modelling of dynamic ductile fracture propagation in different lab-scale experiments using GTN damage model	105-112
Kasivitamnuay, Jirapong / Singhatanadgid, Pairod	Object-Oriented Software for Fitness-For-Service Assessment of Cracked Cylinder Based on API RP 579	163-180
Abderahmane, Sahli / Merabbi, Fouzia / Lousdad, Abdelkader / Megueni, Abdelkader	Optimization design based approach for the determination and minimization of the displacement under tensile load in hybrid composite joint	281-298
Budhe, Sandip / de Barros, S. / Banea, M. D.	Prediction of the burst pressure for defective pipelines using different semi-empirical models	137-147
Saadatmand, Mohsen / Talemi, Reza	Study on the thermal cycle of Wire Arc Additive Manufactured (WAAM) carbon steel wall using numerical simulation	98-104
Kryvyi, Oleksandr / Morozov, Yurii	Thermally active interphase inclusion in a smooth contact conditions with transversely isotropic half-spaces	33-50
Djebbar, Noureddine / Hadj Boulenouar, Rachid / Boutabout, Benali	Three-dimensional Numerical Analysis of a Joint Bonded Reinforced with Silica Nanoparticles (SiO2)	128-136

Autor(en)

Titel

Seite(n)

Bouali, Meriem Fakhreddine / Abdelkader, Hima

Alternative Estimation of Effective Young’s Modulus for Lightweight Aggregate Concrete LWAC

82-97

Li, Dandan / Zhang, Tierui

Building crack monitoring based on digital image processing

1-8

Farrahi, G. H. / Ahmadi, Alireza / Kashyzadeh, Kazem Reza / Jahani, Kambiz

A comparative study on the fatigue life of the vehicle body spot welds using different numerical techniques: Inertia relief and Modal dynamic analyses

67-81