Engineering Structures - November 2024

Erschienen:	November 2024

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Shao, Yanda / Li, Ling / Li, Jun / Li, Qilin / An, Senjian / Hao, Hong	3D displacement measurement using a single-camera and mesh deformation neural network	118767
Akbari, Morteza / Palizvan Zand, Javad / Falborski, Tomasz / Jankowski, Robert	Advanced seismic control strategies for smart base isolation buildings utilizing active tendon and MR dampers	118756
Chen, Haijun / Cai, Yong / Zhang, Jiajia / Lv, Xiaoyong / Li, Xueqi	Analytical solutions for out-of-plane response of curved beams resting on an elastic foundation under a random moving load	118753
Yuan, Yue / Zhang, Xiang / Ji, Jiaxuan / Zhang, Linju / Zeng, Bin / Wang, Chun-Lin	Axial compression performance of circular steel tubes with localized corrosion repaired by laser-cladding additive manufacturing	118811
Li, Jianwei / Jia, Chen / Guo, Lanhui	Behavior of eccentrically loaded slender concrete-filled steel tubes with defect representing random local corrosion	118766
Liu, Faqi / Yang, Dongdong / Wei, Chenyang / Yang, Hua / Bai, Luhan	Behaviour and design of prestressed stayed circular concrete-filled double skin steel tubular (PS-CCFDSST) columns under axial compression	118788
Xie, Zhiqiang / Shi, Leilei / Peng, Lingyun / Zhang, Shi / Zhou, Daxing / Zhang, Xiangdong / Yu, Cheng	Behaviour of a Cold-Formed Steel Shear Wall with Centre-Corrugated Steel Sheathing under Cyclic Loading	118650
Jiang, Kaidi / Wang, Xin / Ben, Qingguo / Ding, Lining / Chen, Zhiyuan / Liew, J. Y. Richard / Du, Hongjian / Wu, Zhishen	Bond behavior of BFRP bars in ultra-high performance seawater sea-sand concrete reinforced by non-metallic fibers	118699
Wang, Yanlei / Wang, Mifeng / Zhang, Xue / Cai, Gaochuang	Bond of steel-FRP composite bar embedded in FRP-confined concrete: Behavior, mechanism, and strength model	118693
Wu, Nan / Xiong, Chao / Fu, Jiyang / Wu, Jiurong / He, Yuncheng	A broadband bistable energy harvester with self-decreasing potential barrier effect: Design, modeling and experiments	118670
Yang, Tao / Chen, Mingyu / Pang, Ruiwen / Huang, Junren	Collapse behavior of fully prefabricated composite frames with segmented PC floor slabs in a middle column removal scenario	118737
Gwashavanhu, Benjamin Katerere / Oberholster, Abrie J. / Heyns, Stephan P.	A comparative study of principal component analysis and kernel principal component analysis for photogrammetric shape-based turbine blade damage analysis	118712
Wu, Chengqing / Yu, Zizheng / Shao, Ruizhe / Li, Jun	A comprehensive review of extraterrestrial construction, from space concrete materials to habitat structures	118723
He, Jun / Feng, Sidong / Vasdravellis, George / Liu, Tingshu	Cyclic inelastic performance evaluation of locking bolt demountable shear connectors in steel-concrete composite structures	118690
Zampieri, Paolo / Piazzon, Riccardo / Niero, Laura / Pellegrino, Carlo	Damaged masonry arch bridges strengthened with external post-tensioning: Experimental and numerical results	117929
Fu, Wenwei / Chen, Yi / Luo, Yaozhi / Wan, Hua-Ping / Ma, Zhi / Shen, Yanbin	Deformation prediction model of large-span prestressed structure for health monitoring based on robust Gaussian process regression	118597
Tapia, Nicolás F. / Reyes, Sergio I. / Vassiliou, Michalis F. / Almazán, José L.	Development of a pressure-, velocity-, and acceleration-dependent phenomenological friction model using experimental data of sliding tests between 11 polymers and stainless steel	118761
Rabaia, Tareq / Dicleli, Murat	Development of strength reduction factors for performance-based seismic design of bridges in far-fault seismic regions	118805
Xu, Kang / Li, Qiusheng / Zhou, Kang / Han, Xuliang	Dynamic performance of a supertall building with an active tuned mass damper system during Super Typhoon Saola	118778
Vandecruys, Eline / Hendriks, Max A. N. / Van de Velde, Menno / Lombaert, Geert / Verstrynge, Els	Dynamic stiffness parameter assessment of cracked reinforced concrete beams: A numerical and experimental study	118758
Peiris, Abheetha / Cole, Aaron / Russell, Ethan / Hutchinson, Cody / Harik, Issam	Effect of live loads on top slab of cast-in-place reinforced concrete box culverts	118709
De Iasio, Alessandro / Ghiassi, Bahman / Briganti, Riccardo	Effects of the structural mass on the waterborne debris impact force	118719
Hermans, Yahroun Fei Long / Grillanda, Nicola / Ehab Moustafa Kamel, Karim / Milani, Gabriele / Massart, Thierry Jacques	Efficient image-based homogenized limit analysis for irregular masonry with lumped mortar joints representation	118688
Komarizadehasl, Seyedmilad / Jiménez, Manuel Antonio González / Pérez Casas, José María / Lozano-Galant, Jose Antonio / Turmo, José	Eigenfrequency analysis using fiber optic sensors and low-cost accelerometers for structural damage detection	118684
Menghini, Alessandro / Meng, Bowen / Leander, John / Castiglioni, Carlo Andrea	Estimating bridge stress histories at remote locations from vibration sparse monitoring	118720
Schauenberg, Aquiles S. / Rodríguez, Rene Q. / Almeida, Diego T. / Zanon, Jose E. / Cunha, Elenon / Lopes, Angelica P. O. / Tonatto, Maikson L. P.	Evaluating thermal gradient in GMAW welding process with a novel heat source model: Numerical and experimental approach	118724
Sharaf, Tarek / Abdellatif, Mohamed / Elghandour, Mohamed / ElSabbagh, Ashraf	Experimental and finite element evaluations of single-T composite cold-formed steel beam with concrete slab	118762
Vahidimanesh, Benyamin / Farrokhabadi, Amin / Shahvari, Reyhaneh / Gazor, Mohammad Sajad / Mahdiabadi, Morteza Karamooz	Experimental and numerical investigation of damage in multilayer sandwich panels with square and trapezoidal corrugated cores under quasi-static three-point bending	118715
Chen, Zhenjian / Zong, Zhouhong / Li, Jiaqi / Li, Jun / Yan, Yufei / Wu, Chengqing	Experimental and numerical study on damage behavior of air-backed steel-concrete-steel composite panels subjected to underwater contact explosion	118744
Soydan, Cihan / Çalım, Furkan / Güllü, Ahmet / Yuksel, Ercan	Experimental investigation of the effective parameters on the lead extrusion damper performance	118714
Chetival, Survesh / Chikermane, Sanjay	Experimental investigation of traditional Kath-Kuni wall system and traditional joints	118694
Fan, Yong / Chen, Tao / Yang, Guangdong / Cui, Xianze / Lu, Wenbo / Wang, Gaohui / Tian, Bin	Experimental investigation on dynamic response of concrete gravity dam under shock wave and bubble pulsation	118796
Yu, Runze / Qiu, Yanyu / Xing, Huadao / Xu, Guangan / Wang, Mingyang / Li, Bin / Xie, Lifeng / Sun, Song	Experimental investigation on the dynamic response of vent plate under methane-air mixtures explosion load	118471
Chen, Jiawei / Chen, Ju	Experimental study on dynamic response of CFRCM confined seawater sea sand RC columns subjected to lateral impact	118716
Zhao, Yan-Gang / He, Yuexi / Zhang, Zhenjun / Lin, Siqi	Experimental study on seismic behavior of concrete-filled steel tubular columns subjected to localized corrosion	118765
Su, Xingyu / Yang, Hong / Liu, Qingpei / Wang, Xinjun / Fu, Jianping	Experimental study on seismic behavior of reinforced concrete exterior beam-column joints under varying axial load	118682
Li, Xirui / Unjoh, Shigeki	Experimental study on seismic performance of post-tensioned precast segmental piers designed with multiple joint openings	118664
Li, Yanghui / Xue, Weichen / Jiang, Jiafei	Experimental study on seismic performance of two-story two-bay. Precast concrete frame with UHPC-based connections	118793
Zhang, Zicheng / Wei, Yang / Yi, Jiyang / Wei, Baoxing / Lin, Yu / Huang, Silu	Experiments and design of laminated bamboo and concrete-filled steel tube columns under axial compression	118692
Gikonyo, Joan W. / Schweigler, Michael / Bader, Thomas K.	Exploring the relationship between embedment behaviour in cross-laminated timber and its layers: An experimental study	118677
Yan, Xi-Feng / Lin, Siqi / Yang, Di / Zhao, Yan-Gang	Fiber-based model for rectangular/square concrete-filled steel tubular columns under arbitrary end moment ratios considering member imperfection	118795
Hawileh, Rami A. / Salama, A. S. D. / Mhanna, Haya H. / Assad, Maha / Abdalla, Jamal A. / Saqan, Elias I.	Flexural behavior of RC beams externally strengthened with side-bonded CFRP laminates with variable internal reinforcement	118707
Zhao, Xianzhong / Lyu, Jiafeng / Xu, Xiaoxu / Yan, Shen	Flexural behaviour of shallow-embedded steel column bases	118738
Zhang, Anling / Chen, Zhihua / Liu, Jiadi	Flexural performance of innovative thin-walled steel–timber composite floor slabs	118676
Cui, Minghao / Cheng, Zhengshun / Chen, Peng / Moan, Torgeir	A frequency-domain hydroelastic approach for modeling and stochastic dynamic analysis of pontoon-type floating bridges	118740
Niu, Lizhi / Di Paola, Mario / Pirrotta, Antonina / Xu, Wei	Generalized complex fractional moment for the probabilistic characteristic of random vectors	118685
Kurumbhati, M. M. / Ramancha, M. K. / Aakash, B. S. / Conte, J. P. / Lotfizadeh, K. H.	Hierarchical Bayesian modeling for calibration and uncertainty quantification of constitutive material models: Application to a uniaxial steel material model	118409
Hu, Xiaoqi / Chen, Yuru / Xie, Zhuangning / Yu, Xianfeng	High-fidelity aerodynamic model for generalized crosswind loads on tall buildings	118768
Lu, Yujie / Lv, Qingfang / Liu, Ye	Hysteresis performance and damage mode of self-centering frame with masonry infill wall: Experimental study assisted with DIC technique	118797
Zhou, Yun / Zhang, Xin / Yi, Fan / Sun, Jing-Ming / Ni, Jia / Li, Ting / Yi, Wei-Jian	Impact resistance and performance of precast shear walls with various connections under axial and lateral loads	118748
Yang, Xiongjun / Lei, Ying / Zhu, Hongping / Shen, Wenai	In-situ detection of cable MR damper failures using cable substructure vibration displacements under unknown wind loads	118743
Romero, Alfredo / Odenbreit, Christoph	Innovative demountable steel-timber composite (STC) beams: Experimental full-scale bending tests	118599
Hegeir, Osama Abdelfattah / Malo, Kjell Arne / Stamatopoulos, Haris	An innovative slip-friction moment-resisting connection using screwed-in threaded rods in cross laminated timber and steel coupling parts: An experimental study	118654
Das, Arindam / Bera, Kamal K. / Banerjee, Arnab	Investigation on metadamping and energy dissipation in thin-walled mono-symmetric metabeam	118700
Song, Yupeng / Hong, Xu / Sun, Tao / Zhang, Zili	Joint probabilistic modeling of extreme wind-wave conditions under typhoon impact and applications to extreme response analysis of floating offshore wind turbines	118686
Ding, Ya-Bo / Chen, Hui / Sun, Jing-Ming / Yi, Wei-Jian / Ma, Zhongguo John / Zhou, Yun	Lateral resistances of RC shear walls controlled by shear and sliding failure modes under axial tension	118786
Liu, Jun-zhi / Ma, Xiaowei / Xu, Fei / Chen, Junbo / Wang, Lin / Zhou, Yang / Guo, Jiachen	Local buckling behaviour of Q690 high strength steel cold-formed round-ended oval hollow section stub columns under axial compression: Experimental investigation, numerical modelling and design	118683
Li, Yongguang / Zhou, Heying / Zhang, Zhongya / Yang, Jun / Wang, Xiuman / Wang, Xu / Zou, Yang	Macro-micro investigation on the coefficient of friction on the interface between steel and cast-in-place UHPC	118769
Chen, Sheng / Wang, Wenxi / Liu, Guokun / Zhou, Chao / Chen, Bei / Chen, Zhengqing	Mechanical behavior and seismic control performance of a metallic torsional damper for flexible structures	118674
Truong, Dinh-Nhat / Chou, Jui-Sheng	Metaheuristic algorithm inspired by enterprise development for global optimization and structural engineering problems with frequency constraints	118679
Hu, Chuanxin / Zhao, Lin / Guan, Xulong / Ge, Yaojun	Mitigation mechanism of torsional vortex-induced vibrations using aerodynamic countermeasures: Case study on a typical closed-box girder	118611
Kunecký, Jiří / Štembera, Vítězslav / Hochreiner, Georg	Mode I bearing capacity of notched timber beams: Reliable modeling techniques via VCCT for practical use	118657
Yao, Junjie / Zheng, Yanfeng / Tang, Jingzhe / Wang, Siqi / Luo, Yaozhi / Yang, Chao	Multi-layered solid element for seismic analysis of rubber bearings considering stress continuity based on finite particle method	118713
Wang, Jinghan / Li, Chao / Chen, Lingwei / Zhou, Shengtao / Hu, Gang / Ou, Jinping	A new controllable weak recycling inflow turbulence generator for evaluating wind effects on building in LES	118742
Marchisella, A. / Muciaccia, G.	A new hold-down device for seismic applications in CLT buildings: Design, testing, analytical and numerical assessment	118689
Zhang, Shaohui / Ji, Xiaodong / Sun, Lei / Yu, Yue / Cheng, Xiaowei	New OpenSees material model for simulating reinforced concrete shear walls subjected to coupled axial tension and cyclic lateral loads	118774
Liu, Yifan / Miao, Zhiwei / Hogan, Lucas / Zhu, Mingliang / Lu, Yong	A new prediction model for residual deformation capacity of corroded steel bars	118739
Xie, Chongfeng / Feng, Peng	Novel bamboo-raft-type floating structure (BRT-FS) assembled by FRP reinforced concrete tubes: Conceptual design and analysis	118705
El-Naqeeb, Mohamed H. / Ungermann, Jan / Hegger, Josef / Hassanli, Reza	Numerical modeling of the punching shear behavior of biaxially loaded RC footings	118747
Lee, Ikjae / Park, JeongYong / Jin, Chungkuk / Kim, MooHyun	On the correction of hydrostatic stiffness for discrete-module-based hydroelasticity analysis of vertically arrayed modules	118710
Jiang, Yutong / Xu, Guoshan	Online numerical simulation method based on adaptive unscented Kalman filter for shear wall structures	118749
Masnata, C. / Pirrotta, A.	Optimal control of base-isolated systems with sliding TLCD under stochastic process	118754
Meng, Xianchuan / Xie, Yi Min / Ma, Jiaming	Optimization of fiber orientation and topology for curved-folded laminated bamboo veneer shells	118772
Yan, Wang-Ji / Zhan, Jiang-Zheng / Yuen, Ka-Veng / Ren, Wei-Xin / Papadimitriou, Costas	PC-Kriging-powered parallelizing Bayesian updating for stochastic vehicle-track dynamical system with contact force measurements and Gaussian process discrepancy model	118578
Zhou, Gaoyang / Zhu, Zhihui / Huang, Yong / Ba, Zhenning / Wang, Jiahao	Post-earthquake damage probability assessment of high-speed railway simply supported bridge based on traffic capacity	118741
Yamaguchi, Takahiro / Mizutani, Tsukasa	Predicting the Maximum Displacements of Structures during an Earthquake based on Chaos Theory	118794
Yang, Dingkun / Yang, Jian / Shi, Jun	Prediction and analysis of damage to RC columns under close-in blast loads based on machine learning and Monte Carlo method	118787
Mishra, Sohini / McCrum, Daniel P.	Prediction of axial-compressive behaviour of bare cold-formed steel studs through a new stud-to-track contact modeling approach	118757
Palipana, Dhanushka K. / Trandafir, Alexandru N. / Mihaylov, Boyan I. / Proestos, Giorgio T.	Quantification of shear transfer mechanisms in reinforced concrete deep beams using measured experimental data	118711
Kosarneshan, Kamyar / Dersch, Marcus S. / Edwards, J. Riley	Quantifying the effect of fixed structures on rail stress management: A numerical investigation	118662
Dang, Zheng / Feng, Peng / Suong, Saravath / Tang, Liyun	Quasi-static cyclic tests of FRP-confined steel-reinforced HPFRCC circular columns	118745
Mendizábal, Virginia / Martínez, Borja / Bernat-Maso, Ernest / Gil, Lluís	RC beams strengthened with hemp-FRCM and cotton-FRCM under cyclic bending loads	118718
Martins, André Dias / Teixeira, Ângelo Palos / Ramôa Correia, Joao / Silvestre, Nuno / Figueiredo e Sá, Mário	Reliability-based code calibration of local buckling strength design of pultruded GFRP I- and H-section columns	118687
Lü, Qiangfeng / Zhu, Weiqiu / Deng, Maolin	Response of MDOF nonlinear system with fractional derivative damping and driven by fractional Gaussian noise	118751
Wang, Kun / Liu, Wenguang / Yang, Sen / Xu, Hao	Seismic behavior of a hollow precast concrete shear wall with insulation under high axial compression ratios	118672
Zhang, Baozhuang / Song, Xiaobin / Xie, Qifang / Xue, Jianyang	Seismic behavior of looseness-induced inclined mortise and tenon joints in ancient timber structures: Experimental tests, multi-scale finite element model, and behavior degradation	118680
Gao, Xiaoshu / Peng, Changle / Chen, Cheng / Guo, Tong	Seismic fragility estimation through real-time hybrid simulation and surrogate-based multi-fidelity Monte Carlo predictor	118763
Hung, Chung-Chan / Lin, Chin-Cheng / Do, Tuong Dat Dinh	Seismic rehabilitation of RC frames with innovative precast U-shaped UHPC jackets: Experimental evaluation and computational simulation	118746
Vadalà, Federica / da Silva, Luís C. M. / Caliò, Ivo / Lourenço, Paulo B.	Semi-probabilistic calibration of material partial safety factors for the capacity assessment of existing masonry structures	118656
Wang, Ruhua / Li, Jun / Li, Ling / An, Senjian / Ezard, Bradley / Li, Qilin / Hao, Hong	Structural damage identification by using physics-guided residual neural networks	118703
Zhao, Yanlin / Sun, Bing / Bi, Sifeng / Beer, Michael / Moens, David	A sub-convex similarity-based model updating method considering multivariate uncertainties	118752
Mitseas, Ioannis P. / Ni, Peihua / Fragkoulis, Vasileios C. / Beer, Michael	Survival probability surfaces of hysteretic fractional order structures exposed to non-stationary code-compliant stochastic seismic excitation	118755
Lakavath, Chandrashekhar / Prakash, S. Suriya	Tensile constitutive relationship of UHPFRC from crack hinge based inverse analysis of notched beams	118698
Li, Zhaochao / Hu, Di / Shen, Meiling / Huang, Hao / Ou, Zhihua	Thermal upheaval buckling framework of a graphene-reinforced subsea pipeline laid on an arched concave seabed	118750
Zhu, Fengshen / Yeter, Baran / Brennan, Feargal / Collu, Maurizio	Time-domain fatigue reliability analysis for floating offshore wind turbine substructures using coupled nonlinear aero-hydro-servo-elastic simulations	118759
Medina, Christian D. / Ruiz, Rafael O. / Herrera, Ricardo A. / Beltran, Juan F.	Uncertainty quantification in mechanical properties for Cu-based SMA wires and strands based on Bayesian inference	118708
McGeown, Claire / Hester, David / Kreslin, Maja / Pakrashi, Vikram / Anžlin, Andrej / Obrien, Eugene	Using the load distribution between girders to monitor the condition of bridges	118426
Rytömaa, Samuli / Malmi, Olli / Laine, Sampo / Keinänen, Jarkko / Viitala, Raine	Wire rope isolator identification and dynamic modeling for small amplitude vibrations	118721

Über diese
Datenseite
IssueID
74489
Veröffentlicht am:
01.09.2024
Geändert am:
01.09.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Engineering Structures - November 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - November 2024

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.