Engineering Structures - August 2022

Erschienen:	August 2022

Autor(en)	Titel	Seite(n)
Scattarreggia, Nicola / Galik, William / Calvi, Paolo M. / Moratti, Matteo / Orgnoni, Andrea / Pinho, Rui	Analytical and numerical analysis of the torsional response of the multi-cell deck of a collapsed cable-stayed bridge	114412
Monney, Frédéric / Yu, Qianhui / Ruiz, Miguel Fernández / Muttoni, Aurelio	Anchorage of shear reinforcement in beams and slabs	114340
Manny, Agemar / Stempniewski, Lothar / Albers, Albert / Simons, Katrin	Conceptual design and investigation of an innovative joint for the rapid and precise assembly of precast UHPC elements	114454
Picozzi, V. / Akbaba, A. / Avossa, A. M. / Ricciardelli, F.	Correction of historical records to improve the reliability of design wind speeds	114473
de Albuquerque, Nathalia B. / Gaspar, Cássio M. R. / Seixas, Mario / Santana, Murillo V. B. / Cardoso, Daniel C. T.	Design, fabrication and analysis of a bio-based tensegrity structure using non-destructive testing	114457
He, Xiuzhang / Chen, Yiyi / Ke, Ke / Shao, Tiefeng / Yam, Michael C. H.	Development of a connection equipped with fuse angles for steel moment resisting frames	114503
Zhang, Wen / Xu, Jun / Yu, T. X.	Dynamic behaviors of bio-inspired structures: Design, mechanisms, and models	114490
Zou, Shengquan / Cao, Ran / Deng, Lu / Wang, Wei	Effect of stress reversals on fatigue life evaluation of OSD considering the transverse distribution of vehicle loads	114400
Chen, Liujie / Fu, Jiyang / Mei, Yahui / Huang, Di / Ng, Ching-Tai / Yao, Haodong	Effects of operational variability and damage on structural response signals: A method based on LMS radar image and residual-permutation entropy	114479
Ferreira Filho, José Osvaldo / Tankova, Trayana / Carvalho, Hermes / Martins, Cláudio / da Silva, Luís Simões	Experimental and numerical flexural buckling resistance of high strength steel columns and beam-columns	114414
Al-Jelawy, Haider M.	Experimental and numerical investigations on monotonic tensile behavior of grouted sleeve couplers with different splicing configurations	114434
Lu, Yujie / Liu, Ye / Ge, Qi / Lv, Qingfang / Wang, Zhengqi	Experimental and numerical studies on hysteretic behavior of friction-strip coupled damper	114519
Jiang, Ke / Zhao, Ou / Young, Ben	Experimental and numerical study of stainless steel channel-to-gusset plate connections	114461
Nie, Xin / Duan, Linli / Zhuang, Liangdong / Ding, Ran / Fan, Jiansheng	Experimental and numerical study on steel-concrete composite frames with engineered cementitious composites	114489
Lei, Min / Li, Yuan-Qi / Luo, Jin-Hui / Li, Ying-Lei / Wang, Peng	Experimental and theoretical study on concrete-filled T-shaped steel tubular columns under uniaxial eccentric compression	114531
Ma, You-Xin / Tan, Kang Hai	Experimental investigation of CIP and PC beam-to-CECFST column joints with simple connection details under lateral cyclic loading	114460
Zheng, Yanfeng / Li, Sili / Xu, Xian	Experimental study on a novel cable-strut truss	114491
Wei, Chuan / Zhang, Qinghua / Yang, Zhengxiang / Li, Mingzhe / Cheng, Zhenyu / Bao, Yi	Flexural cracking behavior of reinforced UHPC overlay in composite bridge deck with orthotropic steel deck under static and fatigue loads	114537
Ogrizovic, J. / Abbiati, G. / Stojadinović, B. / Frangi, A.	Hybrid simulation of a post-tensioned timber frame and validation of numerical models for seismic design	114415
Vo, Nhi H. / Pham, Thong M. / Hao, Hong / Bi, Kaiming / Chen, Wensu	Impact load mitigation of meta-panels with single local resonator	114528
Baek, E. / Pohoryles, D. A. / Kallioras, S. / Bournas, D. A. / Choi, H. / Kim, T.	Innovative seismic and energy retrofitting of wall envelopes using prefabricated textile-reinforced concrete panels with an embedded capillary tube system	114453
Fan, Linyuan / Huang, Yong / Ji, Dandan / Moradi, Zohre / Safa, Maryam / Khadimallah, Mohamed Amine	Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates	114518
Özbek, Özkan / Bulut, Mehmet / Erklig, Ahmet / Bozkurt, Ömer Yavuz	Interlaminar shear strength and failure analysis of composite laminates with double and triple hybrid configurations	114498
Yu, Jun / Yu, Xu-Feng / Tang, Jian-hui / Deng, Yongjun	Local damage of precast concrete columns with grout sleeve connections under contact detonation	114499
Heng, Junlin / Zheng, Kaifeng / Feng, Xiaoyang / Veljković, Milan / Zhou, Zhixiang	Machine Learning-Assisted probabilistic fatigue evaluation of Rib-to-Deck joints in orthotropic steel decks	114496
Yang, Kangkang / Gao, Liqiang / Zheng, Kaikai / Shi, Jun	Mechanical behavior of a novel steel-concrete joint for long-span arch bridges – Application to Yachi River Bridge	114492
Li, Chong / Shen, Hui-Shen / Yang, Jian	Multi-scale modeling and numerical analysis of sandwich beams with FG auxetic 3D lattice cores and GRC face sheets subjected to drop-weight impacts	114486
Adela Mejia-Nava, Rosa / Imamovic, Ismar / Hajdo, Emina / Ibrahimbegovic, Adnan	Nonlinear instability problem for geometrically exact beam under conservative and non-conservative loads	114446
Wang, Peixuan / Milani, Gabriele / Li, Shengcai	A novel Lower Bound Limit Analysis model with hexahedron elements for the failure analysis of laboratory and thin infill masonry walls in two-way bending	114449
Xiang, Siyu / He, Yongjun / Zhou, Xuhong	Performance assessment of steel parking structure columns subjected to frontal collision based on reduced vehicular models	114517
Love, J. S. / Haskett, T. C.	The practical effects of friction for tuned mass dampers installed in tall buildings	114495
Voulpiotis, Konstantinos / Schär, Styfen / Frangi, Andrea	Quantifying robustness in tall timber buildings: A case study	114427
Dobrý, Jakub / Wolfger, Hannes / Benko, Vladimir	Reliability of slender concrete columns designed according to the Eurocodes	114266
Xu, J. P. / Wu, H. / Ma, L. L. / Fang, Q.	Residual axial capacity of seismically designed RC bridge pier after near-range explosion of vehicle bombs	114487
Rivera-Vargas, Darío / Heredia-Zavoni, Ernesto	Seismic demand analysis using environmental contours of vector-valued ground motion intensity measures	114526
Gul, Akhtar / Alam, Bashir / Shahzada, Khan	Seismic performance evaluation of unconfined dry stacked block masonry structure	114529
Ou, Yu-Chen / Nguyen, Nguyen Van Bao / Wang, Wei-Ru	Seismic shear behavior of new high-strength reinforced concrete column and steel beam (New RCS) joints	114497
Yi, Wei-Jian / Li, Ye / Chen, Hui / Ma, Zhongguo John / Zhou, Ke-Jing / Huang, Yuan / Zhou, Yun	Shear strength evaluation of RC D-Regions based on Single-Panel Strut-and-Tie model	114500
Fußeder, Martin / Wüchner, Roland / Bletzinger, Kai-Uwe	Towards a computational engineering tool for structural sensitivity analysis based on the method of influence functions	114402
Kwon, Ohjun / Sohn, Hoon / Lim, Hyung Jin	Ultrasonic-based tensile force estimation for cylindrical rod at various temperature conditions	114509
Tzortzinis, Georgios / Ai, Chengbo / Breña, Sergio F. / Gerasimidis, Simos	Using 3D laser scanning for estimating the capacity of corroded steel bridge girders: Experiments, computations and analytical solutions	114407

Autor(en)

Titel

Seite(n)

Scattarreggia, Nicola / Galik, William / Calvi, Paolo M. / Moratti, Matteo / Orgnoni, Andrea / Pinho, Rui

Analytical and numerical analysis of the torsional response of the multi-cell deck of a collapsed cable-stayed bridge

114412

Monney, Frédéric / Yu, Qianhui / Ruiz, Miguel Fernández / Muttoni, Aurelio

Anchorage of shear reinforcement in beams and slabs

114340

Manny, Agemar / Stempniewski, Lothar / Albers, Albert / Simons, Katrin

Conceptual design and investigation of an innovative joint for the rapid and precise assembly of precast UHPC elements

114454

Picozzi, V. / Akbaba, A. / Avossa, A. M. / Ricciardelli, F.

Correction of historical records to improve the reliability of design wind speeds

114473

de Albuquerque, Nathalia B. / Gaspar, Cássio M. R. / Seixas, Mario / Santana, Murillo V. B. / Cardoso, Daniel C. T.

Design, fabrication and analysis of a bio-based tensegrity structure using non-destructive testing

114457

He, Xiuzhang / Chen, Yiyi / Ke, Ke / Shao, Tiefeng / Yam, Michael C. H.

Development of a connection equipped with fuse angles for steel moment resisting frames

114503

Zhang, Wen / Xu, Jun / Yu, T. X.

Dynamic behaviors of bio-inspired structures: Design, mechanisms, and models

114490

Zou, Shengquan / Cao, Ran / Deng, Lu / Wang, Wei

Effect of stress reversals on fatigue life evaluation of OSD considering the transverse distribution of vehicle loads

114400

Chen, Liujie / Fu, Jiyang / Mei, Yahui / Huang, Di / Ng, Ching-Tai / Yao, Haodong

Effects of operational variability and damage on structural response signals: A method based on LMS radar image and residual-permutation entropy

114479

Ferreira Filho, José Osvaldo / Tankova, Trayana / Carvalho, Hermes / Martins, Cláudio / da Silva, Luís Simões

Experimental and numerical flexural buckling resistance of high strength steel columns and beam-columns

114414

Al-Jelawy, Haider M.

Experimental and numerical investigations on monotonic tensile behavior of grouted sleeve couplers with different splicing configurations

114434

Lu, Yujie / Liu, Ye / Ge, Qi / Lv, Qingfang / Wang, Zhengqi

Experimental and numerical studies on hysteretic behavior of friction-strip coupled damper

114519

Jiang, Ke / Zhao, Ou / Young, Ben

Experimental and numerical study of stainless steel channel-to-gusset plate connections

114461

Nie, Xin / Duan, Linli / Zhuang, Liangdong / Ding, Ran / Fan, Jiansheng

Experimental and numerical study on steel-concrete composite frames with engineered cementitious composites

114489

Lei, Min / Li, Yuan-Qi / Luo, Jin-Hui / Li, Ying-Lei / Wang, Peng

Experimental and theoretical study on concrete-filled T-shaped steel tubular columns under uniaxial eccentric compression

114531

Ma, You-Xin / Tan, Kang Hai

Experimental investigation of CIP and PC beam-to-CECFST column joints with simple connection details under lateral cyclic loading

114460

Zheng, Yanfeng / Li, Sili / Xu, Xian

Experimental study on a novel cable-strut truss

114491

Wei, Chuan / Zhang, Qinghua / Yang, Zhengxiang / Li, Mingzhe / Cheng, Zhenyu / Bao, Yi

Flexural cracking behavior of reinforced UHPC overlay in composite bridge deck with orthotropic steel deck under static and fatigue loads

114537

Ogrizovic, J. / Abbiati, G. / Stojadinović, B. / Frangi, A.

Hybrid simulation of a post-tensioned timber frame and validation of numerical models for seismic design

114415

Vo, Nhi H. / Pham, Thong M. / Hao, Hong / Bi, Kaiming / Chen, Wensu

Impact load mitigation of meta-panels with single local resonator

114528

Baek, E. / Pohoryles, D. A. / Kallioras, S. / Bournas, D. A. / Choi, H. / Kim, T.

Innovative seismic and energy retrofitting of wall envelopes using prefabricated textile-reinforced concrete panels with an embedded capillary tube system

114453

Fan, Linyuan / Huang, Yong / Ji, Dandan / Moradi, Zohre / Safa, Maryam / Khadimallah, Mohamed Amine

Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates

114518

Özbek, Özkan / Bulut, Mehmet / Erklig, Ahmet / Bozkurt, Ömer Yavuz

Interlaminar shear strength and failure analysis of composite laminates with double and triple hybrid configurations

114498

Yu, Jun / Yu, Xu-Feng / Tang, Jian-hui / Deng, Yongjun

Local damage of precast concrete columns with grout sleeve connections under contact detonation

114499

Heng, Junlin / Zheng, Kaifeng / Feng, Xiaoyang / Veljković, Milan / Zhou, Zhixiang

Machine Learning-Assisted probabilistic fatigue evaluation of Rib-to-Deck joints in orthotropic steel decks

114496

Yang, Kangkang / Gao, Liqiang / Zheng, Kaikai / Shi, Jun

Mechanical behavior of a novel steel-concrete joint for long-span arch bridges – Application to Yachi River Bridge

114492

Li, Chong / Shen, Hui-Shen / Yang, Jian

Multi-scale modeling and numerical analysis of sandwich beams with FG auxetic 3D lattice cores and GRC face sheets subjected to drop-weight impacts

114486

Adela Mejia-Nava, Rosa / Imamovic, Ismar / Hajdo, Emina / Ibrahimbegovic, Adnan

Nonlinear instability problem for geometrically exact beam under conservative and non-conservative loads

114446

Wang, Peixuan / Milani, Gabriele / Li, Shengcai

A novel Lower Bound Limit Analysis model with hexahedron elements for the failure analysis of laboratory and thin infill masonry walls in two-way bending

114449

Xiang, Siyu / He, Yongjun / Zhou, Xuhong

Performance assessment of steel parking structure columns subjected to frontal collision based on reduced vehicular models

114517

Love, J. S. / Haskett, T. C.

The practical effects of friction for tuned mass dampers installed in tall buildings

114495

Voulpiotis, Konstantinos / Schär, Styfen / Frangi, Andrea

Quantifying robustness in tall timber buildings: A case study

114427

Dobrý, Jakub / Wolfger, Hannes / Benko, Vladimir

Reliability of slender concrete columns designed according to the Eurocodes

114266

Xu, J. P. / Wu, H. / Ma, L. L. / Fang, Q.

Residual axial capacity of seismically designed RC bridge pier after near-range explosion of vehicle bombs

114487

Rivera-Vargas, Darío / Heredia-Zavoni, Ernesto

Seismic demand analysis using environmental contours of vector-valued ground motion intensity measures

114526

Gul, Akhtar / Alam, Bashir / Shahzada, Khan

Seismic performance evaluation of unconfined dry stacked block masonry structure

114529

Ou, Yu-Chen / Nguyen, Nguyen Van Bao / Wang, Wei-Ru

Seismic shear behavior of new high-strength reinforced concrete column and steel beam (New RCS) joints

114497

Yi, Wei-Jian / Li, Ye / Chen, Hui / Ma, Zhongguo John / Zhou, Ke-Jing / Huang, Yuan / Zhou, Yun

Shear strength evaluation of RC D-Regions based on Single-Panel Strut-and-Tie model

114500

Fußeder, Martin / Wüchner, Roland / Bletzinger, Kai-Uwe

Towards a computational engineering tool for structural sensitivity analysis based on the method of influence functions

114402

Kwon, Ohjun / Sohn, Hoon / Lim, Hyung Jin

Ultrasonic-based tensile force estimation for cylindrical rod at various temperature conditions

114509

Tzortzinis, Georgios / Ai, Chengbo / Breña, Sergio F. / Gerasimidis, Simos

Using 3D laser scanning for estimating the capacity of corroded steel bridge girders: Experiments, computations and analytical solutions

114407

Anzeige

Engineering Structures - August 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Engineering Structures - August 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.